New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Comments
^ This!
C2L (32GB):
How is this possible?
Need CentOS and PayPal billing for sure.
@Gulf - It's the most popular preview!
Eh, you could say the same thing about DO. I think it's worked out pretty well for you guys.
how the hell to login via ssh its impossible to me
wont let me in
is there any initial password or what ?
Just checked and my account is corporate (anything with valid VAT can be corporate) and excluded from VAT (this is not valid for orders in France). Also, every order outside EU won't be charged with VAT. So, for most of us, the prices are VAT free.
You have to upload a SSH key first. See "Credentials" in their panel (top right).
hi
is scaleway coming with ipv6?
Create a SSH key, download it to your computer and login as root using this key (in PuTTy SSH>AUTHKEY .
Then, if you like to login without key but with password (not recommended) chance sshd_config to accept password logins and restart ssh service, after you created a root password.
I'm confused on the Direct SSD thing. It says it's cleared when you power off the server. Why is that? It would been much better if you can install your OS and apps there.
sweet thx for login help
Retrieving speedtest.net configuration...
Retrieving speedtest.net server list...
Testing from Free SAS (...)...
Selecting best server based on latency...
Hosted by NEOTELECOMS (Paris) [1.59 km]: 2.287 ms
Testing download speed........................................
Download: 933.58 Mbit/s
Testing upload speed..................................................
Upload: 506.82 Mbit/s
They have in C2 (at least the 16MB ram model)
I got C2M for 17.99€. If there is a interest, I can run any benchmark.
How about this directly connected SSD drive ? Can you post the model from smartctl ?
Nice to see they send the offer to my inboxes but I still have to wait for the invite...
Interesting, but I don't think it's anywhere near as intriguing as the €3 ARM.
They aren't cheap or powerful enough to be great value, and the small amount of disk space further limits that.
# smartctl -a/dev/sda smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.4-std-manual] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org =======> UNRECOGNIZED OPTION: / Use smartctl -h to get a usage summary root@scw-51c5c7:~# smartctl -a /dev/sda smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.4-std-manual] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG MZ7LN256HCHP-00000 Serial Number: S1ZENXAGC06412 LU WWN Device Id: 5 002538 d4084dc0c Firmware Version: EMT0100Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Mar 8 19:02:41 2016 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 178 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 3 170 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 171 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 010 Old_age Always - 0 173 Unknown_Attribute 0x0033 099 099 005 Pre-fail Always - 1 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 178 Used_Rsvd_Blk_Cnt_Chip 0x0013 100 100 010 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 770 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 070 056 000 Old_age Always - 30 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 233 Media_Wearout_Indicator 0x0013 099 099 000 Pre-fail Always - 16768826 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 480 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 0 249 Unknown_Attribute 0x0032 099 099 000 Old_age Always - 480 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.so it the Intel vps good or not for the price?
someone run a benchmark on the C2S pls. download from https://www.primatelabs.com/geekbench/download/
is analogue of Samsung 850 Evo. It's quite good.
Can I install Proxmox on this server?
It's the 830 isn't it?
I read review recently. It looks more like a Samsung 850 Evo by test results and description.
S2M benchmark:
http://serverbear.com/benchmark/2016/03/08/2RaeNdZEZC3oGVDE
How so?
What? 50gb SSD is small? Please point to a better value.
So they totally stopped the arm ones?
That's a shame keeping both would have been great, with the old setup cheaper for flat files storage for example, and this one for those who need more CPU power.
But I'm not sure the new CPU is that more powerful if it's more powerful at all... The direct SSD for database is fun BUT I/O will be the bottleneck only is the CPU is powerful...
Great .. I have a C1 since last few months and now stable..
the server has vt. but am unable to install prox due to network settings i think