Pulsed Media 12Th Anniversary Celebration ** FREE Seedboxes AND Special Anniversary Seedboxes!

dgc1980

@PulsedMedia said: ~20-30%

may take that chance. but my luck always sucks

_MS_

Congratulations

tototo

I got M10G Raffle 🥳

ObViper

managed to try out the V10G now

PULSEDMEDIA-12TH-ANNIVERSARY-CELEBRATION

dgc1980

playing around with the V10G, I dont think this is of any good to me,

using it as a dedicated torrent grabber to a dedicated server with sonarr and radarr already running on it, and using a FTPS mount to transfer the data to the dedicated server

public tracker leeching via VPN sucks on the dedicated server.

since qbittorrent is behind double authentication it does not allow external resources to connect to it.

guess I will stick with ultra

PulsedMedia

@dgc1980 said:
playing around with the V10G, I dont think this is of any good to me,

using it as a dedicated torrent grabber to a dedicated server with sonarr and radarr already running on it, and using a FTPS mount to transfer the data to the dedicated server

public tracker leeching via VPN sucks on the dedicated server.

since qbittorrent is behind double authentication it does not allow external resources to connect to it.

guess I will stick with ultra

You can probably bypass the double auth, just access your lighttpd directly. If i recall right it's configured so redirect.
Other than self configure qbittorrent but that will occasionally get overwritten

Peculiar setup you got there.

Regardless, if you figure out how that setup could work we are interested on adding support to it.

You could also setup ssh port forwarding too and it would solve that aswell

dgc1980

@PulsedMedia said: just access your lighttpd directly.

I will look in to that setting shortly and see how I go

ok editing .lighttp.conf and changing the auth settings seemed to work, thanks

$HTTP["url"] !~ "^/user-XXXXX/qbittorrent/" {
  auth.require = (
   "/user-XXXXX/" =>
      (
          "method" => "basic",
          "realm" => "Password protected area",
          "require" => "user=XXXXX"
      )
  )
}

Koh

I try to purchase the V10G XS until the checkout page.
My Bitdefender Internet Security block the checkout page and show

 "An attempt to send your password unencrypted was about to occur on pulsedmedia.com. We blocked the connection to stop your private data from being exposed and tampered with."

Is it safe to add pulsedmedia.com to security exception in Bitdefender?

PulsedMedia

@dgc1980 said:

@PulsedMedia said: just access your lighttpd directly.

I will look in to that setting shortly and see how I go

ok editing .lighttp.conf and changing the auth settings seemed to work, thanks

$HTTP["url"] !~ "^/user-XXXXX/qbittorrent/" {
  auth.require = (
   "/user-XXXXX/" =>
      (
          "method" => "basic",
          "realm" => "Password protected area",
          "require" => "user=XXXXX"
      )
  )
}

Use the .lighttpd/custom file for custom configs btw, that .lighttpd.conf gets overwritten.
Now if i could recall if i fixed that it's not a shell script being executed tho Let us know if that needs fixing, will do as others will benefit even tho this is very niche use case

taizi

@PulsedMedia said: All Debian 10 servers, so even for older ones if it's not an very old server

checked the seedbox and it is Debian10, but can you make a tutorial? Can't find where to enable qBitTorrent

PulsedMedia

@Koh said:
I try to purchase the V10G XS until the checkout page.
My Bitdefender Internet Security block the checkout page and show

 "An attempt to send your password unencrypted was about to occur on pulsedmedia.com. We blocked the connection to stop your private data from being exposed and tampered with."

Is it safe to add pulsedmedia.com to security exception in Bitdefender?

You are first one with that, you use you are on https? should autoredirect tho.

Also compare IP you get for pulsedmedia.com to a 3rd party service like https://whatismyipaddress.com/hostname-ip (first result, not affiliated, unknown site!)

PulsedMedia

@taizi said:

@PulsedMedia said: All Debian 10 servers, so even for older ones if it's not an very old server

checked the seedbox and it is Debian10, but can you make a tutorial? Can't find where to enable qBitTorrent

Open ticket or let us know the server name and i will launch updates on it. then you can enable it from welcome page

Koh

@PulsedMedia said:

You are first one with that, you use you are on https? should autoredirect tho.

Also compare IP you get for pulsedmedia.com to a 3rd party service like https://whatismyipaddress.com/hostname-ip (first result, not affiliated, unknown site!)

Or Maybe because I used Bitdefender VPN service too ?
I will try to turn off Bitdefender VPN service then purchase its again.

taizi

@PulsedMedia said:

@taizi said:

@PulsedMedia said: All Debian 10 servers, so even for older ones if it's not an very old server

checked the seedbox and it is Debian10, but can you make a tutorial? Can't find where to enable qBitTorrent

Open ticket or let us know the server name and i will launch updates on it. then you can enable it from welcome page

sent #631022

taizi

@PulsedMedia said: should autoredirect tho.

yes, it autoredirected
but can you also make seedbox autoredirect? don't know will cause what problem, but seems safer

dgc1980

@PulsedMedia said: Use the .lighttpd/custom file for custom configs btw, that .lighttpd.conf gets overwritten.

nope does not work

can only have one auth statement, so having the include either above or below the original auth statement overwrite anything in the custom file as the custom is trying to exclude the qbittorrent path but the original auth is including it.

$HTTP["url"] =~ "^/user-XXXX/qbittorrent/" {
  auth.require = ()
}

above is the working config for it, at least I worked that out.

PulsedMedia

@taizi said:

@PulsedMedia said:

@taizi said:

@PulsedMedia said: All Debian 10 servers, so even for older ones if it's not an very old server

checked the seedbox and it is Debian10, but can you make a tutorial? Can't find where to enable qBitTorrent

Open ticket or let us know the server name and i will launch updates on it. then you can enable it from welcome page

sent #631022

replied, server updating. That is one heck of a busy server for 4 drive 1Gbps server at that nearly 90TB/Mo pace right now.

@taizi said: but can you also make seedbox autoredirect? don't know will cause what problem, but seems safer

Will happen soonish if Let's Encrypt / Certbot doesn't s**** itself again for a while. Too many problems with Certbot to even now call https stable, just today last time had to do some shenanigans manually on a server to get certbot running sigh.

@dgc1980 said:

@PulsedMedia said: Use the .lighttpd/custom file for custom configs btw, that .lighttpd.conf gets overwritten.

nope does not work

can only have one auth statement, so having the include either above or below the original auth statement overwrite anything in the custom file as the custom is trying to exclude the qbittorrent path but the original auth is including it.

$HTTP["url"] =~ "^/user-XXXX/qbittorrent/" {
  auth.require = ()
}

above is the working config for it, at least I worked that out.

I wonder if that's safe to do by standard.

For now you could have on custom config completely separate path for qbittorrent. either /user-XXXX/ leading so you can use the main nginx reverse proxying OR just /qbittorrent and access directly lighttpd (which is kinda prone to have port changed eventually tbh !)

dgc1980

@PulsedMedia said: I wonder if that's safe to do by standard.

it is only as safe as the person setting the password in qbittorrent, since it is a opt-in based install, you can bake in a random password/users password using echo -n 'PASSWORD' | md5sum | mawk '{print $1} to generate the a MD5 hash of the password and set it in WebUI\Password_ha1=@ByteArray(HASH) inside the users .config/qBittorrent/qBittorrent.conf

PulsedMedia

@dgc1980 said:

@PulsedMedia said: I wonder if that's safe to do by standard.

it is only as safe as the person setting the password in qbittorrent, since it is a opt-in based install, you can bake in a random password/users password using echo -n 'PASSWORD' | md5sum | mawk '{print $1} to generate the a MD5 hash of the password and set it in WebUI\Password_ha1=@ByteArray(HASH) inside the users .config/qBittorrent/qBittorrent.conf

Thanks! I tried to find how qBittorrent sets password when setting up the integration initially, but could not easily find it!
That way it can be set to the same password and made globally directly reachable.

Surprising to see md5 being still used.

You deserve a cookie

dgc1980

@PulsedMedia said: You deserve a cookie

WebUI\Username=XXXXX to change default username from admin also.

rather than a cookie you can upgrade my slot to a M10G (j/k)

dgc1980

ok with the changes and my testing so far, I have decided to move to pulsed and cancel the ultra. just a shame about the RAID0 will end up getting 2x V10G S

PulsedMedia

@dgc1980 said:
ok with the changes and my testing so far, I have decided to move to pulsed and cancel the ultra. just a shame about the RAID0 will end up getting 2x V10G S

Wow! Thanks!
I will be very keen to hear your comparisons once you have settled in, pros and cons. Where we could do better, and where they did better.

dgc1980

@PulsedMedia said: and where they did better.

hard one to say, I chose them originally due to the unmetered SFTP/FTP/FTPS transfers not being counted towards their bandwidth limits, I cannot find any hard information about yours it is a little confusing reading in your support articles, not that I was able to connect via FTPS so far and just using standard FTP

plus I have only been with then for about 2 months so far due to the reasons above regarding VPN and public trackers.

dgc1980

@PulsedMedia said: Wow! Thanks!

am I able to upgrade the existing V10G XS to a S or will I need to order a new one?

PulsedMedia

@dgc1980 said:

@PulsedMedia said: Wow! Thanks!

am I able to upgrade the existing V10G XS to a S or will I need to order a new one?

Easiest if new one, and ask previous one (if just ordered) as refund to credit

dgc1980

@PulsedMedia said: refund to credit

just open a ticket? or PM here?

edit: sent ticket anyway.

PulsedMedia

@dgc1980 said:

@PulsedMedia said: refund to credit

just open a ticket? or PM here?

Ticket always on stuff like this.

ehab

even thou i am not taking part, i can always remeber PulsedMedia from last BF. Alex did give great offers... best were the €18/y wished i taken it.... next time

congrats and best wishes for many years to come.

emperor

@ehab said: €18/y wished i taken it

Stay tuned perhaps we will get 12.12€/y

PulsedMedia

@emperor said:

@ehab said: €18/y wished i taken it

Stay tuned perhaps we will get 12.12€/y

world domination 12.12€ at a time! 😈