microLXC Public Test

lowendtalkxdax

fd5b-6df0-afe9-2d9e

Neoon

Restocked Vilnius.

Neoon

IPv6 connectivity issue in Milan has been fixed.

Neoon

No info about Chile though, the prefixes disappeared from the routing table entirely.
Will post here when I know more.

Hosteroid

Bratislava?

zGato

@Hosteroid said:
Bratislava?

@Neoon do it

Neoon

@Neoon said:
No info about Chile though, the prefixes disappeared from the routing table entirely.
Will post here when I know more.

Update on Chile.

At about 5:50am 29th June NZST (About 3 hours prior from this notification being sent) we have noticed that there has been network distributions in our Chile facility.

We are in communication with a datacenter tech (our upstreams) who are investigating the fault. So far we have been told that there has been power related failures in the facility

We are hoping and expect things to come back online within the next hour or so, and will continue to get updates from the upstream datacenter

We deeply apologies for these disruptions on your services and thank you for your patience and understanding

Neoon

@zGato said:

@Hosteroid said:
Bratislava?

@Neoon do it

Waiting for deployment, probably available next week.

zGato

@Neoon said:

@zGato said:

@Hosteroid said:
Bratislava?

@Neoon do it

Waiting for deployment, probably available next week.

Too many exotic locations for me, can't have them all
now i'm sad

Neoon

Restocked Milan.

Neoon

Bratislava is now available thanks to @Hosteroid
Groningen is not longer available and will be discontinued in a few weeks, replacement Node in Meppel should be up by end of the week.

Hosteroid

@Neoon said:
Bratislava is now available thanks to @Hosteroid
Groningen is not longer available and will be discontinued in a few weeks, replacement Node in Meppel should be up by end of the week.

Good luck with it!

fadedmaple

If I remember correctly, was there like 20 ports and recently it became 100?
If terminate and then redeploy an LXC, the port stays the same. Is this some sort of algorithm derived from the account? I realized I have a few that port start from 8200. Or is it simply because no one else has deployed

Neoon

@fadedmaple said:
If I remember correctly, was there like 20 ports and recently it became 100?
If terminate and then redeploy an LXC, the port stays the same. Is this some sort of algorithm derived from the account? I realized I have a few that port start from 8200. Or is it simply because no one else has deployed

Yea a while ago I started upgrading the allocated ports from 20 to 100.

The allocation is still slot based, if you are on slot 2 and you delete it, you will end up on slot 2 again, hence the same ports.
Even if a Node already has like 30 containers on it.

fadedmaple

@Neoon said:

@fadedmaple said:
If I remember correctly, was there like 20 ports and recently it became 100?
If terminate and then redeploy an LXC, the port stays the same. Is this some sort of algorithm derived from the account? I realized I have a few that port start from 8200. Or is it simply because no one else has deployed

Yea a while ago I started upgrading the allocated ports from 20 to 100.

The allocation is still slot based, if you are on slot 2 and you delete it, you will end up on slot 2 again, hence the same ports.
Even if a Node already has like 30 containers on it.

Thank you for explaining. Everyone goes into the slots in order? So it's just a coincidence that different regions have the same ports? The port gap between slot1 and slot2 even more than 100? Since ssh is 8200, this results as ports 8101-8200 unassignable

Neoon

@fadedmaple said:

@Neoon said:

@fadedmaple said:
If I remember correctly, was there like 20 ports and recently it became 100?
If terminate and then redeploy an LXC, the port stays the same. Is this some sort of algorithm derived from the account? I realized I have a few that port start from 8200. Or is it simply because no one else has deployed

Yea a while ago I started upgrading the allocated ports from 20 to 100.

The allocation is still slot based, if you are on slot 2 and you delete it, you will end up on slot 2 again, hence the same ports.
Even if a Node already has like 30 containers on it.

Thank you for explaining. Everyone goes into the slots in order? So it's just a coincidence that different regions have the same ports? The port gap between slot1 and slot2 even more than 100? Since ssh is 8200, this results as ports 8101-8200 unassignable

Of course they have the same port ranges, why would I change it?

You counting wrong, its 8200 - 8299.
Before it was 8200- 8219.

fadedmaple

Of course they have the same port ranges, why would I change it?

I mean if slot5 8200-8299, slot6 8300-8399 then it's a bit of a coincidence that I always get slot5. So I thought it was a randomized algorithm using accounts as seed

You counting wrong, its 8200 - 8299.

But the panel shows 8200-8300, if you like round hundreds maybe [8200,8300)

Neoon

@fadedmaple said:

Of course they have the same port ranges, why would I change it?

I mean if slot5 8200-8299, slot6 8300-8399 then it's a bit of a coincidence that I always get slot5. So I thought it was a randomized algorithm using accounts as seed

No that's just you.

You counting wrong, its 8200 - 8299.

But the panel shows 8200-8300, if you like round hundreds maybe [8200,8300)

That indeed is a bug, fixed.
Just a display bug though.

Carlin0

Does Oradea have IPV6 now ?

Neoon

@Carlin0 said:
Does Oradea have IPV6 now ?

Oradea always had IPv6.
The only locations that do not have IPv6 is Finland and Tokyo.

Neoon

Restocked Bratislava.

kvz12

Is there any chance of restocking Tokyo? Not Tokyo Equinix.

Void

@kvz12 said:
Is there any chance of restocking Tokyo? Not Tokyo Equinix.

How are they different?

Neoon

@kvz12 said:
Is there any chance of restocking Tokyo? Not Tokyo Equinix.

Unlikely, the Node is very small, however I could ask for an upgrade.

Neoon

@Neoon said:
Groningen is not longer available and will be discontinued in a few weeks, replacement Node in Meppel should be up by end of the week.

Meppel is now available as replacement for Groningen, same packages as before.
Everyone that still has a container or virtual-machine on Groningen will be notified, in a bit, to give them enough time to migrate.

ask_seek_knock

@Neoon said: Meppel is now available as replacement for Groningen, same packages as before.

Thank you very much.

I noticed that after deploying (an Arch Linux OS in Meppel), the SSH public key was not copied to /root/.authorized_keys, thus a manual copy via the browser may be needed. Hope it's my bad rather than a bug.

Neoon

@ask_seek_knock said:

@Neoon said: Meppel is now available as replacement for Groningen, same packages as before.

Thank you very much.

I noticed that after deploying (an Arch Linux OS in Meppel), the SSH public key was not copied to /root/.authorized_keys, thus a manual copy via the browser may be needed. Hope it's my bad rather than a bug.

Looks like a bug, changed a few lines, builserver looks fine however still have to test it locally later before deploying it.

Strikerr

Is the control panel temporarily disabled? I can't log in.

Neoon

@Strikerr said:
Is the control panel temporarily disabled? I can't log in.

For some reason a VPN tunnel died, fixed it.

kvz12

@Void said:

@kvz12 said:
Is there any chance of restocking Tokyo? Not Tokyo Equinix.

How are they different?

Tokyo Equinix doesn't have IPv6.