microLXC Public Test

fadedmaple

@Neoon said:

@fadedmaple said:

@SwordfishBE said:
I have a small 64mb instance in almost every location, never noticed lag or loss... Yes bbr can improve stability in some use cases, don't think it's needed for microlxc purpose?

VMware workstation and parallels desktop can simulate packet loss and latency. You can experience 300ms with 10% packet loss, test ssh with bbr on and off.

Yea but the thing is, did you ever reach out to me because of a location having packet loss issues, so it would make sense to apply it?

And if then, we probably have ditched that location for shit network quality.
I get the point, but I have not seen a single network report this year.

I understand your point. As long as the service is running smoothly, you prefer not to make any changes. I'm in the same boat I use bbr on almost all servers except one production server.
But a single servers usually can't satisfy all the other regions' ISPs with stable latency and low packet loss. If you live in New York and play games on a Korean server, FPS games will be nearly unplayable, and even Hearthstone Battlegrounds may feel frustrating. My current ISP experiences 3%-10% packet loss on all non-domestic traffic during the evening peak hours. So basically SSH to all containers is a pain in the ass! I added ProxyJump to the SSH config of every host before. This may be personal, but I really don't see a significant downside to use bbr.

Carlin0

@Caztiel said:
@Neoon Something is up with Milan ?

Milan IPV4 up ↑ and IPV6 still down ↓

Neoon

@Carlin0 said:

@Caztiel said:
@Neoon Something is up with Milan ?

Milan IPV4 up ↑ and IPV6 still down ↓

The usual, IPv6 is most of the time considered second class.
I will update here when its resolved.

Neoon

@Carlin0 said:

@Caztiel said:
@Neoon Something is up with Milan ?

Milan IPV4 up ↑ and IPV6 still down ↓

"Following a connectivity incident that caused approximately 30 minutes of downtime, already resolved by our technicians, please note that IPv6 connectivity, BGP sessions, and other additional services will remain temporarily unavailable until further notice."

Raspi_dude

4fc1-e43a-494c-c713

wildwilliam35

308a-f654-a904-9d31

Neoon

Gonna do the verification requests on monday, have to get some sleep from BF.

labrax

4a03-9f09-eb5d-3512

manuv

Should had stopped lurking early and created the LET account - will try this after 3 months

Unless there’s an exception possible (if in case)?

Neoon

Since its CB and we still got a decent amount of memory free on some Nodes.

JP, NL and FI have 50% off memory usage.
So if you get a 128MB LXC container, only 64MB will be deducted, as long as you keep it.

Runs either until the memory threshold is hit or CM ends.

Neoon

@Neoon said:
Gonna do the verification requests on monday, have to get some sleep from BF.

Done, everyone who send a DM.

SwordfishBE

@Neoon said:
Since its CB and we still got a decent amount of memory free on some Nodes.

JP, NL and FI have 50% off memory usage.
So if you get a 128MB LXC container, only 64MB will be deducted, as long as you keep it.

Runs either until the memory threshold is hit or CM ends.

Those it also work if you upgrade your 64mb to 128mb in those locations?

Neoon

@SwordfishBE said:

@Neoon said:
Since its CB and we still got a decent amount of memory free on some Nodes.

JP, NL and FI have 50% off memory usage.
So if you get a 128MB LXC container, only 64MB will be deducted, as long as you keep it.

Runs either until the memory threshold is hit or CM ends.

Those it also work if you upgrade your 64mb to 128mb in those locations?

No.

Neoon

@Neoon said:
Since its CB and we still got a decent amount of memory free on some Nodes.

JP, NL and FI have 50% off memory usage.
So if you get a 128MB LXC container, only 64MB will be deducted, as long as you keep it.

Runs either until the memory threshold is hit or CM ends.

There is about 3GB memory left per Node for the promo.

Neoon

@SwordfishBE said:

@Neoon said:
Since its CB and we still got a decent amount of memory free on some Nodes.

JP, NL and FI have 50% off memory usage.
So if you get a 128MB LXC container, only 64MB will be deducted, as long as you keep it.

Runs either until the memory threshold is hit or CM ends.

Those it also work if you upgrade your 64mb to 128mb in those locations?

Well, if you send me your container ID, I can apply the discunt manually.
If the container is within these locations.

SwordfishBE

Already got a kvm in fi with extras, I'm happy! Thanks!

Neoon

Restocked Mumbai.

dods

2bc7-01c2-4aae-b181

Carlin0

@dods said:
2bc7-01c2-4aae-b181

Congrats on your first post

PS : Read requirements

noaman

41ca-3c09-86d7-46b4

kainjinez

Do we have periodically clean up? My machine is offline for hours and I thought It is a outage until I go to the dashboard and see no machine exist there.

Carlin0

@kainjinez said:
Do we have periodically clean up? My machine is offline for hours and I thought It is a outage until I go to the dashboard and see no machine exist there.

Where was it ?

kainjinez

@Carlin0 said:

@kainjinez said:
Do we have periodically clean up? My machine is offline for hours and I thought It is a outage until I go to the dashboard and see no machine exist there.

Where was it ?

I setup hothost for monitoring and last time it pinged me is 16 Dec 11:12 which is down.
Hostname: lxcc7e60c62
Service port: 6898 (don't remember the range)
Location: SG

When going to microLXC dashboard few hours ago, I saw nothing there, just blank, so I tried to create another lxc to run my service.

Not sure If I violate any terms or it is a bug?

Neoon

@kainjinez said:
Do we have periodically clean up?

We had this here a few times.
https://microlxc.net/index.php?p=about

Is there any activity requirement?
Yes, you have to log in to the Portal every 60 days.

My machine is offline for hours and I thought It is a outage until I go to the dashboard and see no machine exist there.

SG is online, no outage today either.

@kainjinez said:

@Carlin0 said:

@kainjinez said:
Do we have periodically clean up? My machine is offline for hours and I thought It is a outage until I go to the dashboard and see no machine exist there.

Where was it ?

I setup hothost for monitoring and last time it pinged me is 16 Dec 11:12 which is down.
Hostname: lxcc7e60c62
Service port: 6898 (don't remember the range)
Location: SG

When going to microLXC dashboard few hours ago, I saw nothing there, just blank, so I tried to create another lxc to run my service.

Not sure If I violate any terms or it is a bug?

I will check the backups to check if that's valid.

Neoon

Yea, you didn't login for 60 days, more like 67 days and your container was sniped that day for inactivity.
You are free to opt in for the email notifications, you have none on your account so you didn't get any.

kainjinez

@Neoon said:
Yea, you didn't login for 60 days, more like 67 days and your container was sniped that day for inactivity.
You are free to opt in for the email notifications, you have none on your account so you didn't get any.

Thanks for pointing out. No need to check for backups. Thank you.

slownedstark

1a7d-d15c-05fc-fa5b

Neoon

@kainjinez said:

@Neoon said:
Yea, you didn't login for 60 days, more like 67 days and your container was sniped that day for inactivity.
You are free to opt in for the email notifications, you have none on your account so you didn't get any.

Thanks for pointing out. No need to check for backups. Thank you.

I don't do any backups of any containers.
I was talking about the database, checking a snapshot from that day you mentioned, so I can go back in time and check the actual state of your container.

If for some reason it didn't line up, it might be a bug, hence I did check.

admax

37ee-daae-6417-7b20

lukast__

1632-7eb7-3651-b28a