Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


microLXC Public Test - Page 31
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

microLXC Public Test

12931333435

Comments

  • NeoonNeoon Community Contributor, Veteran

    @mrs92 said:

    @jmaxwell said:

    @0xC7 said:

    jmaxwell said: it works alright on OpenVZ for sure (Natvps UK server)

    (about debian 10 run on 64 MB ram VPS) ... but on your screenshot, there is 256 MB swap ... does natvps enable ram swap,

    natvps enabled swap

    Yeah it should be enabled especially on low memory vps.

    Actually it was, on some nodes.
    Despite having it set to false, it does not fully disable swapping.

    Not to speak of that one.
    https://github.com/canonical/lxd/issues/11566

    I noticed that issue yesterday again on Tokyo, a low memory container was causing high I/O load, it wasn't I/O abuse the container just used the swap of the host node, which resulted in high I/O load. Its a HDD node.

    SWAP has been now disabled on all nodes, the few that still had it enabled.

  • Finally reached the requirement, my token:

    2d7d-725d-1343-a24b

    Thanks Neoon!

  • 5f48-138f-2cef-9784

    thanks <3

  • How to add domain ?

    I was add main domain using ipv4 via cloudflare TXT mode but still can’t add

  • NeoonNeoon Community Contributor, Veteran

    Smol service announcement.

    I currently disabled new account creations from LET, since I observed more and more, that people get there thanks from pushing threads with non meaningful content.

    There is a reason for this requirement and right now, its kinda useless.
    No ETA when this will be enabled again, I have to update the Requirements for LET before I do that.

    Thanked by 3bdl Carlin0 ElonBezos
  • NeoonNeoon Community Contributor, Veteran

    @blackeye said:
    How to add domain ?

    I was add main domain using ipv4 via cloudflare TXT mode but still can’t add

    No idea what you want to do, as usual, you have to be more precise.

    Thanked by 1blackeye
  • NeoonNeoon Community Contributor, Veteran

    Will do a quick reboot on Singapore and Groningen on Friday, at around 21:00 UTC.
    More Stock should be available afterwards.

    Thanked by 2ElonBezos Carlin0
  • WorldWorld Veteran

    Just noticed an exotic location - Islamabad is coming soon™️
    Let me guess the sponsor... Virtury?

  • NeoonNeoon Community Contributor, Veteran

    @World said:
    Just noticed an exotic location - Islamabad is coming soon™️
    Let me guess the sponsor... Virtury?

    Wild rumors.

    Thanked by 1Erisa
  • WorldWorld Veteran

    @Neoon said:

    @World said:
    Just noticed an exotic location - Islamabad is coming soon™️
    Let me guess the sponsor... Virtury?

    Wild rumors.

    As far as I know they are the only LE* provider in Islamabad although I could be wrong.

    We will see the correct answer soon™️ :p

  • NeoonNeoon Community Contributor, Veteran

    @Neoon said:
    Smol service announcement.

    I currently disabled new account creations from LET, since I observed more and more, that people get there thanks from pushing threads with non meaningful content.

    There is a reason for this requirement and right now, its kinda useless.
    No ETA when this will be enabled again, I have to update the Requirements for LET before I do that.

    Availability to register via LET will be restored in the next patch.
    The Requirements will remain unchanged, however the process changes and the way I count thanked votes.

    All new accounts need to be manually approved, you can register as usual however to get your Quota raised if you register via LET you have to drop me a PM.

    I will check your account and if everything is legit, you get your Quota raised.

    If you get thanked votes in Sales threads, they no longer count.
    So instead of spamming, you would actually need to contribute content.

    If you would be below 50 after subtracting these, you don't fulfill the Requirements.
    The System can't tell, so hence the manual part.

    Thanked by 2ElonBezos Ganonk
  • NeoonNeoon Community Contributor, Veteran

    Islamabad is now available, Native IPv6 however only a /70 and depending on version and distro, manual configuration might be required.

    Thanks to https://virtury.com / @Virtury

    Currently 3 Packages are available.

    • 1x Core (25%), 64MB, 1.3GB ZFS, 100GB @ 100Mbit
    • 1x Core (50%), 128MB, 2.0GB ZFS, 200GB @ 100Mbit
    • 1x Core (50%), 256MB, 2.5GB ZFS, 200GB @ 100Mbit
  • Thanks @Virtury !

  • d69d-bdd4-6859-88ee

  • zGatozGato Member

    Big W @Virtury :heart:

  • 0xC70xC7 Member

    Neoon said: Islamabad is now available,

    Thats Wild rumors become reality :D
    Let's me thank to @Virtury

  • can anyone tell the example use case for DNSProxy? Still have no clue what that is

  • WorldWorld Veteran
    edited January 31

    @Neoon said:
    Islamabad is now available, Native IPv6 however only a /70 and depending on version and distro, manual configuration might be required.

    Thanks to https://virtury.com / @Virtury

    Currently 3 Packages are available.

    • 1x Core (25%), 64MB, 1.3GB ZFS, 100GB @ 100Mbit
    • 1x Core (50%), 128MB, 2.0GB ZFS, 200GB @ 100Mbit
    • 1x Core (50%), 256MB, 2.5GB ZFS, 200GB @ 100Mbit

    Wow it goes to OOS so quickly! I saw it, I waited for it and I failed to grab it :(

    But there's always "next time", so good luck next time!

  • NeoonNeoon Community Contributor, Veteran

    @NanoG6 said:
    can anyone tell the example use case for DNSProxy? Still have no clue what that is

    You can put your own DNS server behind NAT, can be useful with geoDNS and/or geocast.

    @World said:

    @Neoon said:
    Islamabad is now available, Native IPv6 however only a /70 and depending on version and distro, manual configuration might be required.

    Thanks to https://virtury.com / @Virtury

    Currently 3 Packages are available.

    • 1x Core (25%), 64MB, 1.3GB ZFS, 100GB @ 100Mbit
    • 1x Core (50%), 128MB, 2.0GB ZFS, 200GB @ 100Mbit
    • 1x Core (50%), 256MB, 2.5GB ZFS, 200GB @ 100Mbit

    Wow it goes to OOS so quickly! I saw it, I waited for it and I failed to grab it :(

    But there's always "next time", so good luck next time!

    Restocked, was just the first batch, On new nodes I just start with a smol amount and see if anyone reports issues.

    Thanked by 1World
  • @Neoon said: You can put your own DNS server behind NAT, can be useful with geoDNS and/or geocast.

    You mean recursive DNS? How do I use it on my clients? is it DoH?

  • NeoonNeoon Community Contributor, Veteran

    @NanoG6 said:

    @Neoon said: You can put your own DNS server behind NAT, can be useful with geoDNS and/or geocast.

    You mean recursive DNS? How do I use it on my clients? is it DoH?

    No, Authoritative. You can run your own dns server with your own zones.
    The only thing you need to do is tell the dns load balancer for what domain to accept DNS queries and forward them to your container.

    Technically, currently is just PLAIN that is supported by default.
    However, DoH, DoH3, DoQ, DNS over TLS and DNSCrypt is possible.

    No one asked for it though.

  • remyremy Member

    3894-6537-02c5-afd1

    To the north !

  • NeoonNeoon Community Contributor, Veteran
    edited February 5

    RO gets migrated from E5 to Xeon Gold in 1 hour ish. Thanks @host_c / https://www.host-c.com/
    NL is next on the list, but no ETA, gonna be EYPC though.

  • 2ce8-fdf5-fb1a-72cd

  • Can you let us change the hostname displayed in the panel? Or could you add the country code to the Package like microRO? It's very hard for me to remember exactly where Valdivia Sandefjord is. o:) Also auckland why microSD and not microNZ?

  • Do you guys still support Post4VPS.com? I know its been dead for 3 years now but the option remains. Of course, not a new register but inactive account. You can even see my latest post there.

  • NeoonNeoon Community Contributor, Veteran
    edited February 13

    @fadedmaple said:
    Can you let us change the hostname displayed in the panel?

    Yea have to add that feature.

    Or could you add the country code to the Package like microRO?

    No, the Packages are either Regional or Global, not every Node has its own Packages.

    It's very hard for me to remember exactly where Valdivia Sandefjord is. o:) Also auckland why microSD and not microNZ?

    I could add a flag icon next too, that should help.

    microSD is the same as micro but with less disk hence the SD for smol disk.
    Smol disk because the Node has not a big allocation of storage.

    The Package is used in Johannesburg and New Zealand.
    Valdivia and Sandefjord has Global Packages and its own Packages, because the Node has more Storage available.

    I will update the labels though.
    edit: updated the labels

    Thanked by 1fadedmaple
  • NeoonNeoon Community Contributor, Veteran
    edited February 13

    @shaikhmanal said:
    Do you guys still support Post4VPS.com? I know its been dead for 3 years now but the option remains. Of course, not a new register but inactive account. You can even see my latest post there.

    No, Post4VPS has been declared as dead, then it has been hacked too, so even the password reset has been disabled since that. He didn't even bother force resetting users passwords.

    I already posted that 2021.
    https://post4vps.com/Thread-microLXC-Public-Test?pid=42488#pid42488

  • @Neoon said:

    @shaikhmanal said:
    Do you guys still support Post4VPS.com? I know its been dead for 3 years now but the option remains. Of course, not a new register but inactive account. You can even see my latest post there.

    No, Post4VPS has been declared as dead, then it has been hacked too, so even the password reset has been disabled since that. He didn't even bother force resetting users passwords.

    I already posted that 2021.
    https://post4vps.com/Thread-microLXC-Public-Test?pid=42488#pid42488

    The next post to that of yours is mine. Would I be eligible by any chance to claim?

  • NeoonNeoon Community Contributor, Veteran

    @shaikhmanal said:

    @Neoon said:

    @shaikhmanal said:
    Do you guys still support Post4VPS.com? I know its been dead for 3 years now but the option remains. Of course, not a new register but inactive account. You can even see my latest post there.

    No, Post4VPS has been declared as dead, then it has been hacked too, so even the password reset has been disabled since that. He didn't even bother force resetting users passwords.

    I already posted that 2021.
    https://post4vps.com/Thread-microLXC-Public-Test?pid=42488#pid42488

    The next post to that of yours is mine. Would I be eligible by any chance to claim?

    If you meet the requirements here on LET sure.
    I can't verify in any way that this Account there belongs to you.

    What I did, was enable the possibility to reset passwords for accounts on Post4VPS.
    Since you claim its your account, then go ahead and reset the password.

    If its your account, should work out fine, you can add your email address under your account, send me a email request your account to be moved to LET.

Sign In or Register to comment.