Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Categories

In this Discussion

› › 2 dedicated cores, 10 GB RAM, 40 GB SSD, 2TB@1 Gbit/s for 6€/month - Page 6
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

2 dedicated cores, 10 GB RAM, 40 GB SSD, 2TB@1 Gbit/s for 6€/month

1…34689…15

Comments

  • balaji_pitchumanibalaji_pitchumani Member

    @muffin said:
    Tasty offer. But what am I going to do with 10GB of ram ._.

    Proxmox VE installed without any issues from the ISO provided...however did not know how to use it with the 2cores and 40GB disk...may be can do several linux KVMs

  • balaji_pitchumanibalaji_pitchumani Member

    @angstrom said:

    @muffin said:
    Tasty offer. But what am I going to do with 10GB of ram ._.

    I'm so used to small VPSes with 256 MB or 512 MB or 1 GB of RAM that it seems like a liberation not to have to worry about RAM. :smile: (Nevertheless, I set up a swap space of 128 MB, largely out of habit -- old habits die hard!)

    Hi...is there a dummy's guide to do this using the proxmox ve? Will be using IPv6 for directly reaching the VPS over internet right?

  • angstromangstrom Moderator

    @balaji_pitchumani said:

    @angstrom said:

    @muffin said:
    Tasty offer. But what am I going to do with 10GB of ram ._.

    I'm so used to small VPSes with 256 MB or 512 MB or 1 GB of RAM that it seems like a liberation not to have to worry about RAM. :smile: (Nevertheless, I set up a swap space of 128 MB, largely out of habit -- old habits die hard!)

    Hi...is there a dummy's guide to do this using the proxmox ve? Will be using IPv6 for directly reaching the VPS over internet right?

    I wish that I could help but I'm not using Proxmox VE. (I'm using this VPS as a work environment, with no need for further virtualization.)

    I think that there's a lot of documentation about using Proxmox VE around (I would start at https://pve.proxmox.com/wiki/Get_support ), but yes, the more specialized the issue, the trickier it can be.

    Perhaps someone like @Falzo would have a further recommendation.

    Thanked by 1balaji_pitchumani
  • vimalwarevimalware Member

    Set up some KVMs on lvm-thin and see how it handles the disk overprovisioning. (enable fstrim+discard on guests)

  • dataforestdataforest Member, Patron Provider

    @balaji_pitchumani said:
    raised a ticket but they want the ISO path.

    If you really can't find it please don't hesitate to contact us again. We will help you :)

    @angstrom said:
    if one really needs more than 2 TB bandwidth, then the Hetzner plan is the clear winner.

    Absolutely. We also manage some projects with heavy traffic usage (~ 150 TB monthly), for such cases Hetzner is great as bandwidth is expensive in our data center. We make bigger and bigger commitments, so our traffic price goes down consequently, but it will take some time to make "Hetzner-like" prices for traffic :sweat_smile:

    @doughnet said:
    Possible to have a private network between multiple servers?

    An own VLAN is possible only with dedicated servers / housing currently. But we can add internal IPs for free which can not be reached from outside.

    @gks said:
    Do you allow private network within your data centre? Is internal communication traffic free?

    See my previous answer. Internal traffic is always free.

    Best Regards,
    Tim

    Thanked by 1corbpie
  • poissonpoisson Member

    I really don't need another idling server
    I really don't need another idling server
    I really don't need another idling server

    You all are making it damn difficult to resist with this activity and enthusiasm.

    Thanked by 2AlwaysSkint eol
  • cybertechcybertech Member

    Have been resisting for days now. Luckily no one posted Centos bench yet.

  • angstromangstrom Moderator

    @poisson said:
    I really don't need another idling server
    I really don't need another idling server
    I really don't need another idling server

    You all are making it damn difficult to resist with this activity and enthusiasm.

    I know the feeling. :smile:

    This is my first new VPS of 2019, so I don't feel so guilty, plus I'm really using this new VPS for work. In addition, I didn't renew an old (smaller) netcup vServer in February. How's this as a rationalization? :smiley:

    Thanked by 3Ympker uptime eol
  • NanoG6NanoG6 Member

    If only it's monthly payment, I'll gladly replace my Contabo

  • sanvitsanvit Member

    @angstrom said:

    @poisson said:
    I really don't need another idling server
    I really don't need another idling server
    I really don't need another idling server

    You all are making it damn difficult to resist with this activity and enthusiasm.

    I know the feeling. :smile:

    This is my first new VPS of 2019, so I don't feel so guilty, plus I'm really using this new VPS for work. In addition, I didn't renew an old (smaller) netcup vServer in February. How's this as a rationalization? :smiley:

    I'm searching for a use of the whopping 10GB ram. Please help me out... :scream:

  • ehabehab Member

    @sanvit said:
    I'm searching for a use of the whopping 10GB ram. Please help me out... :scream:

    elasticsearch cluster.

    Thanked by 1sanvit
  • poissonpoisson Member

    @sanvit said:

    @angstrom said:

    @poisson said:
    I really don't need another idling server
    I really don't need another idling server
    I really don't need another idling server

    You all are making it damn difficult to resist with this activity and enthusiasm.

    I know the feeling. :smile:

    This is my first new VPS of 2019, so I don't feel so guilty, plus I'm really using this new VPS for work. In addition, I didn't renew an old (smaller) netcup vServer in February. How's this as a rationalization? :smiley:

    I'm searching for a use of the whopping 10GB ram. Please help me out... :scream:

    I don't know what to do with 4GB already. Maybe one day when I become a big data researcher I might need more RAM to crunch data.

    Thanked by 1sanvit
  • YmpkerYmpker Member
    edited March 2019

    @sanvit said:

    @angstrom said:

    @poisson said:
    I really don't need another idling server
    I really don't need another idling server
    I really don't need another idling server

    You all are making it damn difficult to resist with this activity and enthusiasm.

    I know the feeling. :smile:

    This is my first new VPS of 2019, so I don't feel so guilty, plus I'm really using this new VPS for work. In addition, I didn't renew an old (smaller) netcup vServer in February. How's this as a rationalization? :smiley:

    I'm searching for a use of the whopping 10GB ram. Please help me out... :scream:

    Minecraft Servers can eat RAM if that's what you're looking for ;)
    Kids will also make sure to attract free DDoS hits :S

    Thanked by 2sanvit poisson
  • datanoisedatanoise Member

    Seems like it's out of stock.

  • angstromangstrom Moderator

    @datanoise said:
    Seems like it's out of stock.

    Yesterday, it appeared that it was selling quickly, so it was probably to be expected. I think that their Christmas special lasted longer (but it also cost two euros more per month).

  • bapbap Member

    I missed this one, I will blame my boss for giving too much task. -_-

  • ChalipaChalipa Member

    disk performance is not good..

    [root@corp ~]# wget freevps.us/downloads/bench.sh -O - -o /dev/null|bash
    Benchmark started on Thu Mar 14 10:52:48 EDT 2019
    Full benchmark log: /root/bench.log

    System Info

    Processor : Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz
    CPU Cores : 2
    Frequency : 2199.998 MHz
    Memory : 9837 MB
    Swap : MB
    Uptime : 41 min,

    OS : \S
    Arch : x86_64 (64 Bit)
    Kernel : 3.10.0-957.5.1.el7.x86_64
    Hostname : **

    Speedtest (IPv4 only)

    Your public IPv4 is 176.6.13.**

    Location Provider Speed
    CDN Cachefly 99.4MB/s

    Atlanta, GA, US Coloat 12.6MB/s
    Dallas, TX, US Softlayer 12.7MB/s
    Seattle, WA, US Softlayer 10.4MB/s
    San Jose, CA, US Softlayer 9.42MB/s
    Washington, DC, US Softlayer 16.6MB/s

    Tokyo, Japan Linode 6.37MB/s
    Singapore Softlayer 8.94MB/s

    Rotterdam, Netherlands id3.net 88.3MB/s
    Haarlem, Netherlands Leaseweb 86.4MB/s

    Disk Speed

    I/O (1st run) : 43.6 MB/s
    I/O (2nd run) : 85.3 MB/s
    I/O (3rd run) : 375 MB/s
    Average I/O : 167.967 MB/s

  • sanvitsanvit Member

    @Chalipa said:
    disk performance is not good..

    [root@corp ~]# wget freevps.us/downloads/bench.sh -O - -o /dev/null|bash
    Benchmark started on Thu Mar 14 10:52:48 EDT 2019
    Full benchmark log: /root/bench.log

    System Info

    Processor : Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz
    CPU Cores : 2
    Frequency : 2199.998 MHz
    Memory : 9837 MB
    Swap : MB
    Uptime : 41 min,

    OS : \S
    Arch : x86_64 (64 Bit)
    Kernel : 3.10.0-957.5.1.el7.x86_64
    Hostname : **

    Speedtest (IPv4 only)

    Your public IPv4 is 176.6.13.**

    Location Provider Speed
    CDN Cachefly 99.4MB/s

    Atlanta, GA, US Coloat 12.6MB/s
    Dallas, TX, US Softlayer 12.7MB/s
    Seattle, WA, US Softlayer 10.4MB/s
    San Jose, CA, US Softlayer 9.42MB/s
    Washington, DC, US Softlayer 16.6MB/s

    Tokyo, Japan Linode 6.37MB/s
    Singapore Softlayer 8.94MB/s

    Rotterdam, Netherlands id3.net 88.3MB/s
    Haarlem, Netherlands Leaseweb 86.4MB/s

    Disk Speed

    I/O (1st run) : 43.6 MB/s
    I/O (2nd run) : 85.3 MB/s
    I/O (3rd run) : 375 MB/s
    Average I/O : 167.967 MB/s

    If you see my serverscope result above, disk speed is pretty fast. Maybe everyone's installing their new servers now? I think you should open up a ticket if this speed continues

  • poissonpoisson Member

    Yea.. Do a daily test for a week and average out the score to get a more reliable overall performance indicator.

  • vimalwarevimalware Member

    @sanvit said:

    I'm searching for a use of the whopping 10GB ram. Please help me out... :scream:

    Gitlab CE + CI runners all-in-one box.
    40GB seems right-sized for source code.
    Run a pihole behind openvpn too while you're at it.

    If I was anywhere near 70% Ram util% on my 22Eur hetzner i7, I'd bite too.

  • NeoonNeoon Community Contributor, Veteran

    Gitea, instead of Bloatlab, maybe worth a try.

  • balaji_pitchumanibalaji_pitchumani Member

    @PHP_Friends said:

    @balaji_pitchumani said:
    raised a ticket but they want the ISO path.

    If you really can't find it please don't hesitate to contact us again. We will help you :)

    Best Regards,
    Tim

    No problems I sorted out by installing English language packs. I suggest you keep the English version of ISO also available for mount as well. Thanks for your support.

  • dataforestdataforest Member, Patron Provider

    @datanoise said:
    Seems like it's out of stock.

    Correct. Now we can sell a few more servers due to some cancellations etc. and will reactivate the product now. But after that it's really sold out, it might last a few hours :)

    Regarding the disk performance just a short information that not every host in this generation has the same disk setup. We run 8-16 SSDs in every host; some hosts still use SATA, some newer use SAS and these are faster of course. However, away from benchmarks you should not notice any difference with real-world workload.

    Best Regards,
    Tim

    Thanked by 2lxterm angstrom
  • LeonDynamicLeonDynamic Member
    edited March 2019

    @PHP_Friends said:
    Regarding the disk performance just a short information that not every host in this generation has the same disk setup. We run 8-16 SSDs in every host; some hosts still use SATA, some newer use SAS and these are faster of course. However, away from benchmarks you should not notice any difference with real-world workload.

    Best Regards,
    Tim

    I thought the disks were pure SSD not SATA or SAS?

  • dataforestdataforest Member, Patron Provider

    They are, but also "pure SSDs" need to be connected via SAS oder SATA.

    Thanked by 2LeonDynamic angstrom
  • ehabehab Member

    @PHP_Friends , is it one per customer? can one ask to be in a different node if already have one.

  • dataforestdataforest Member, Patron Provider

    @ehab said:
    @PHP_Friends , is it one per customer? can one ask to be in a different node if already have one.

    You can order several servers. Please open a ticket to make sure that your VM is set up on a different node, that's no problem.

    Thanked by 2ehab vimalware
  • needavpsneedavps Member

    @PHP_Friends great policy on node and private ip. I was considering a second purchase but needed storage more. Please make a offer next time that has higher storage. Thank you.

    Thanked by 1dataforest
  • nephneph Member

    Hello,

    I'm interested too, but your site isn't in English (german only)? The interface to manage the VPS is in English? Thanks for the answer ;-)

  • lurchlurch Member

    Just ordered, can I order another and double the resources?

Sign In or Register to comment.