New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Atoms are not available in Canada (at all), and with Core i3/i5 there's nothing to "try", they're now in stock pretty much all day.
Ah, I thought Atoms were in stock sometimes for BHS
I have an atom in BHS.
You're a lucky one then, they told me to do one when I ordered one :-(
An Atom in BHS would be fabulous. Much like @rm_ I didn't think they were available, mostly due to costs here in Canada compared to France. But if they are, like @darknyan said, I'm going to keep my eye open! The speedtest to BHS comes back with a 21ms ping and pretty much caps out my 50Mbps connection. RBX pings with 201ms and around 30Mbps sustained download. (Which personally, I didn't think was all that bad!) For 5 Euros a month, I'm not complaining! Plex can transcode files for playing on the Roku and I'm not going to get suspended for abuse.
From this current Kimsufi lineup? Sorry if I wasn't specific enough. There was an Atom deal (at 120 EUR/year, with 2TB disk) couple of years ago in BHS, maybe you have that one?
I have 2. The special and the new 5 euro one.
Well this is interesting. Earlier they said the 5 EUR ones are not available in BHS.
http://lowendtalk.com/discussion/comment/567793/#Comment_567793
how long do the friggin validation process take? been a week already
It usually takes a few hours or a day.
I wish I'd put my hand on one of those 5euro KS-1 in BHS to play with. To bad they don't sell them anymore.
i submitted the docs in May 8th... didnt hear anything yet
Could someone with a Kimsufi do a ping6 to google.com or a traceroute to ipv6.google.com? My box cant reach the server and I'm not sure if it is something I have done (configuring Proxmox)
You can use another IP from the /64 as rm_ has shown. It is probably the bridge which got misconfigured, just add a VM and give it an IPv6, put the connection on the bridge and test.
I'll have a go. Can't reach ipv6 from the host either so it's probably my config
It should work even if the host is not IPv6 capable. It is a bridge.
I can ping6 and it looks up the address (lhr14s21-in-x03.1e100.net) but doesn't actually do the pinging...
root@abigail:~# ping6 google.com PING google.com(lhr14s21-in-x03.1e100.net) 56 data bytesThis is in both containers and the Proxmox host.
From RBX:
It means the dns works, are you sure you setup the IPs on the bridge and not on eth0?
for the containers you probably need to add ipv6 DNS just use google public dns, you can do it directly from the proxmox web gui
How much do these Atom servers actually cost to buy? I.e. the hardware including HDD, RAM etc.
From what I see, the dns works, that is not the problem.
Not sure what I've done then. I used this tutorial - http://mmaton.com/2014/02/ipv6-only-proxmox-ct/
Post your /etc/network/interfaces.
This is the interfaces file for the Proxmox host:
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # for Routing auto vmbr1 iface vmbr1 inet manual post-up /etc/pve/kvm-networking.sh bridge_ports dummy0 bridge_stp off bridge_fd 0 # vmbr0: Bridging. Make sure to use only MAC adresses that were assigned to you. auto vmbr0 iface vmbr0 inet static pre-up iptables-restore < /etc/iptables.rules address 5.39.91.XXX netmask 255.255.255.0 network 5.39.91.0 broadcast 5.39.91.255 gateway 5.39.91.254 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr0 inet6 static address 2001:41D0:8:XXXX::1 netmask 64 post-up /sbin/ip -f inet6 route add 2001:41D0:8:XXXX:ff:ff:ff:ff dev vmbr0 post-up /sbin/ip -f inet6 route add default via 2001:41D0:8:XXXX:ff:ff:ff:ff pre-down /sbin/ip -f inet6 route del default via 2001:41D0:8:XXXX:ff:ff:ff:ff pre-down /sbin/ip -f inet6 route del 2001:41D0:8:XXXX:ff:ff:ff:ff dev vmbr0 auto vmbr0:0 iface vmbr0:0 inet static address 192.168.4.1 netmask 255.255.255.0 network 192.168.4.0 broadcast 192.168.4.255This is the interfaces file for one of my Debian 7 containers:
auto lo iface lo inet loopback # Auto generated venet0 interface auto venet0 iface venet0 inet manual up ifconfig venet0 up up ifconfig venet0 127.0.0.2 up route add default dev venet0 down route del default dev venet0 down ifconfig venet0 down iface venet0 inet6 manual up ifconfig venet0 add 2001:41d0:8:XXXX::100/64 down ifconfig venet0 del 2001:41d0:8:XXXX::100/64 up route -A inet6 add default dev venet0 down route -A inet6 del default dev venet0 auto venet0:0 iface venet0:0 inet static address 192.168.4.100 netmask 255.255.255.255Wrap that up with < pre>< /pre> tags (remove spaces), easier to read.
I see you have no IPv6 on the container, I suggest you use bridged (veth) configuration for the container as opposed to routed (venet) one which will give you an interface seen as eth0 inside the container. Then you can control it from inside and has other advantages for advanced networking. Also, you have a lot of stuff you dont need there.
My validation took about 2 weeks. I received an email about 10 days after submitting saying "we have the docs, we will validate you in a while". About 3 days after that I received "you're validated, no more VAT, sorry we can't give you back what you already paid". About 2 days after that I received "credit notice, 3Euros". 4 Hours later I received an email from PayPal "OVH Refund of 3 Euros". No idea what's going on, but hey, I'll take it.
``> @Maounique said:
Hi Maounique. I've tidied up my post above and added both the host and a container interfaces file to compare.
When I signed up I paid using my debit card. In the future when I renew can I pay using PayPal?
In the regular OVH panel you can switch from CC to PayPal or the other way. You can just add payment methods.