Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

New online.net limited edition server, EUR 19.99/pm, no setup fee

145791017

Comments

  • AmitzAmitz Member
    edited March 2015

    It says that provisioning of your server has been postponed to the given date and time. I guess their automated provisioning system is overloaded at the moment... That sucks a bit, normally their provisioning is very fast.

    Thanked by 1Dean
  • DeanDean Member

    Ahhh so maybe support is delayed to check the physical drive. Thanks :-)

  • AmitzAmitz Member

    That's well possible! You'll know more tomorrow after 11am CET then, I guess.

    Thanked by 1Dean
  • Appears they are out of stock, oh well, will grab one next time.

  • trvztrvz Member
    edited March 2015

    SATA in RAID 0:

    dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync; unlink test
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 4.48069 s, 240 MB/s
  • Network speeds are fast!

  • Ah, completely missed this.

  • how to learn more about hdds in raid? smartctl not working

  • tridinebandim said: how to learn more about hdds in raid? smartctl not working

    SMART isnt working for me either, even when not using RAID

  • Try installing the HP management software...

    http://downloads.linux.hp.com/

  • wychwych Member

    @TarZZ92 said:

    Is it enabled on BIOS/controller?

  • rm_rm_ IPv6 Advocate, Veteran

    TarZZ92 said: SMART isnt working for me either, even when not using RAID

    tridinebandim said: how to learn more about hdds in raid? smartctl not working

    Did you try http://lowendtalk.com/discussion/comment/967686/#Comment_967686

    Thanked by 1tridinebandim
  • SAS in RAID 1

    dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync; unlink test
    16384+0 records in
    16384+0 records out
    1073741824 bytes (1.1 GB) copied, 5.78272 s, 186 MB/s
    
  • rm_ said: Did you

     smartctl -a -d cciss,0 /dev/sda
    smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-37-pve] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
    
    User Capacity:        2,000,398,934,016 bytes [2.00 TB]
    Logical block size:   512 bytes
    Logical Unit id:      0x5000c5004f936951
    Serial number:        Z1P4W3EC
    Device type:          disk
    Local Time is:        Tue Mar 17 23:18:25 2015 CET
    Device supports SMART and is Enabled
    Temperature Warning Disabled or Not Supported
    SMART Health Status: OK
    
    Current Drive Temperature:     
    Read defect list: asked for grown list but didn't get it
    
    Error Counter logging not supported
    Device does not support Self Test logging
    

    not same output, maybe need additional paramaters?

  • rm_rm_ IPv6 Advocate, Veteran

    tridinebandim said: not same output, maybe need additional paramaters?

    May need a newer smartmontools, also try "1" or "2" instead of 0.

  • rm_ said: Did you try

    yes :)

  • Anyone have Dedibox Limited 1115 for sale?

  • tridinebandimtridinebandim Veteran
    edited March 2015

    rm_ said: also try "1" or "2"

    those numbers seem to be the number of installed drives, 0 and 1 gave identical outputs and 2 gave an error.

    when i google about "cciss_vol_status" people mentioning /dev/cciss and using as a parameter for cciss_vol_status. problem is that i dont have a /dev/cciss folder

  • rm_rm_ IPv6 Advocate, Veteran

    @tridinebandim For a start try installing the smartmontools 6.3.
    https://packages.debian.org/search?keywords=smartmontools

    Thanked by 1tridinebandim
  • jarjar Patron Provider, Top Host, Veteran
    edited March 2015

    Isn't it a hardware raid? I think you guys might be looking for hpacucli. Should work with the P410 to get more drive/raid info.

  • tridinebandimtridinebandim Veteran
    edited March 2015

    rm_ said: smartmontools 6.3

    just learned how to install package from backports in debian.

    thanks @rm_ smartmontools 6.3 shows more info...

    Thanked by 1dynweb
  • I want 2 of these servers for cloud development testing if someone made a mistake.
    can be either the SAS or SATA - let me know asap

  • RurikoRuriko Veteran

    aww already out of stock?

  • InfinityInfinity Member, Host Rep
    edited March 2015

    Fek, been so busy today that I missed it. Oh well. :-/

    @TarZZ92 said:
    Network speeds are fast!

    Wait, isn't it a 200Mbit connection to the internet?

  • Infinity said: Wait, isn't it a 200Mbit connection to the internet?

    1 GBit/s port with guaranteed 200 Mbit/s unmetered

    Thanked by 1Infinity
  • DylanDylan Member
    edited March 2015

    Infinity said: Wait, isn't it a 200Mbit connection to the internet?

    Online.net really overdelivers on bandwidth. Even the €1.99 Kidechires (which don't come with any speed guarantee) consistently pull 350-500 Mbps, sometimes much more.

  • Killer offer. First special I've missed - because I was sleeping in due to being sick, gah! Love my kidechires and limited 4814 though.

  • earlearl Member

    So with my SAS server:

    "SMART Health Status: HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE"

    Wonder how quick they are to fix things like this..

    Thanked by 1netomx
  • rm_rm_ IPv6 Advocate, Veteran

    Dylan said: consistently pull 350-500 Mbps

    They pull (download) full gigabit from all over Europe (since the DL is not used much in the datacenter), however the upload is lower and may vary a lot.

  • Online.net is good with connections, no 250Mbps crap like OVH.

Sign In or Register to comment.