New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Dedicated Server starting at 2.99 EUR / month
This discussion has been closed.
Comments
Thank you!
I received my ks2g today. I bought it on 25 July 2013 21:53 GMT+2
Waiting for my 3rd 214726xx
And you are from US ?
@Zen when did you order?
My K2G just got delivered, BC: 2147079x (ordered on 25/07 at 21:47 gmt+2) but I seem to get low HDD speed, around 55-65MB/s, is that ok?
smartctl -a /dev/sda | egrep -i 'power' power-saving mode. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 15 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9Device Model: TOSHIBA DT01ACA050
How do you measure it?
Is that a N2800?
Also for dd, use
dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync; unlink test
dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 16384+0 enregistrements lus 16384+0 enregistrements écrits 1073741824 octets (1,1 GB) copiés, 16,6825 seconde, 64,4 MB/slooks like it's SATA2?
Yep, this is a bit slow.
dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync; unlink test
16384+0 Datensätze ein
16384+0 Datensätze aus
1073741824 Bytes (1,1 GB) kopiert, 8,51309 s, 126 MB/s
Can you give me any suggestions about my low speed ? I'm running CentOS 5.9.
Those speeds look fine for a single disk.
His speed is up to 65 MB, those are from some other guy. I manage to get something similar with IDE disks, so, 65 MB is not ok for sata, even sata one, had an old maxtor thin drive with sata 1 which was passing 100 MB by 10-20%.
I'm getting ~65mb/s with my KS2G-TOSHIBA DT01ACA050 while others with the same config get >100mb/s. Any advices guys ?
Try another distro.
Try out Debian 7. Maybe it's faster.
Why would you run a more than 6 years old OS on a new server?
root@ks335XXXX:~# dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 16384+0 records in 16384+0 records out 1073741824 bytes (1.1 GB) copied, 8.08816 s, 133 MB/sRunning debian 6.0.7 64 bit. OVH kernel.
Because he can?
I will buy it if you don't like it. ;-)
Still waiting for my server 2147045X, sadly I think the count passed me by, but I will see when someone else posts their order id
@spekk said:
On French forum I see BC21471527 processed 8 mins ago, I don't understand why your isn't.
(http://forum.kimsufi.com/showpost.php?p=97357&postcount=1981)
Was referring to 126 MB/s. Apologies.
ryu@hadouken:~# dd if=/dev/zero of=test bs=64k count=16k
16384+0 records in
16384+0 records out
1073741824 bytes (1.1 GB) copied, 9.30254 s, 115 MB/s
I reinstalled the OS (CentOS 6) aaaand it failed (Netboot does not work (Le serveur n'est pas en rescue)) and the system opened a support ticket "Hardware diagnosis"
So maybe wasn't the OS but faulty hardware ?
I'm trying again with the same OS, if it still fails I'll try with another one.
I think they have had an issue with netboot on the latest KS2g. I initiated a reinstall on two of them and both failed with hardware diagnosis tickets being opened.
So, after installing CentOS 6, the speed improved a little:
dd if=/dev/zero of=test bs=64k count=16k 16384+0 records in 16384+0 records out 1073741824 bytes (1.1 GB) copied, 11.3776 s, 94.4 MB/sRun lshw to have all hardware listed in details.