Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Categories

In this Discussion

› › iHostART - 5.69$/yr 50 GB SSD&512 MB VPS DMCA Ignore & Leave invoice no. and duble ram 1x IPv4 NAT - Page 14
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

iHostART - 5.69$/yr 50 GB SSD&512 MB VPS DMCA Ignore & Leave invoice no. and duble ram 1x IPv4 NAT

1…1112141617…39

Comments

  • chakraxzzchakraxzz Member

    @Calin please check ticket for order# 1303, 1308, 1418. thanks.

  • wwwrootswwwroots Member

    i see so many already up, but mine still pending :#

  • mmo25821mmo25821 Member

    @wwwroots said:
    i see so many already up, but mine still pending :#

    me too but give him a time maybe today or tomorrow

  • MaouniqueMaounique Host Rep, Veteran

    I got my info, but ssh times out.

  • CalinCalin ⚠️ Patron Provider Tag Suspended

    Hello @Maounique that it s strange , it s possible give me on PM , you localhost IP?

    Other people have this problem?

    Regards,
    Calin

  • FiberSudsFiberSuds Member

    One more thing for those who use ansible:

    We need to install openssh-server and config a new port, the default ssh port on the panel can not be used by ansible.

  • FiberSudsFiberSuds Member

    This is my first Romania-based VPS, good price. :)

  • DylanLDylanL Member

  • wwwrootswwwroots Member

    @DylanL said:

    :D iam calm

  • r4h156r4h156 Member

    Is anyone else experiencing extremely high load when torrenting on their VPS? I've been testing a few Linux ISO torrents, and the VPS becomes basically unusable and load average spikes to 10+. This happens in qBittorrent even if I only download one torrent at once and limit download speed to 200 KB/sec. Using rtorrent, the load average got to a high of 2-3 at points but seemed to fluctuate when downloading one torrent and limiting download to 1000 KB/sec, but it got up to the same 10+ when download speed was left uncapped.

    Here's a screenshot of top while running rtorrent limited to 1000 KB/sec download (high load, but still usable):

  • lookingbadlookingbad Member

    @Calin said:
    Hello , left 114 VPS's

    Regards

    looks like outofstock, Need one

  • zGatozGato Member

    @lookingbad said:

    @Calin said:
    Hello , left 114 VPS's

    Regards

    looks like outofstock, Need one

  • bgerardbgerard Member

    @r4h156 said:
    Is anyone else experiencing extremely high load when torrenting on their VPS? I've been testing a few Linux ISO torrents, and the VPS becomes basically unusable and load average spikes to 10+. This happens in qBittorrent even if I only download one torrent at once and limit download speed to 200 KB/sec. Using rtorrent, the load average got to a high of 2-3 at points but seemed to fluctuate when downloading one torrent and limiting download to 1000 KB/sec, but it got up to the same 10+ when download speed was left uncapped.

    Here's a screenshot of top while running rtorrent limited to 1000 KB/sec download (high load, but still usable):

    I wouldn't expect great torrent performance on a nat vps of these specs. Especially when there's probably 200 other people trying to do the same thing. You'd probably be better off using this machine as a vpn or proxy for a torrent client elsewhere.

  • libinglibing Member

    @FiberSuds said:
    One more thing for those who use ansible:

    We need to install openssh-server and config a new port, the default ssh port on the panel can not be used by ansible.

    Thx. One could just replace the default dropbear with openssh-server as well, saving one port ;P

    Thanked by 1FiberSuds
  • KebabKebab Member
    edited May 2023

    double ram will be added later on? I see 512MB at the moment.
    also yabs disk speed test seems very rough

    fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 874.00 KB/s    (218) | 6.24 MB/s       (97)
Write      | 910.00 KB/s    (227) | 6.61 MB/s      (103)
Total      | 1.78 MB/s      (445) | 12.85 MB/s     (200)
           |                      |
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 13.98 MB/s      (27) | 22.34 MB/s      (21)
Write      | 15.29 MB/s      (29) | 24.67 MB/s      (24)
Total      | 29.27 MB/s      (56) | 47.02 MB/s      (45)
  • XrmaddnessXrmaddness Member

    @Kebab said:
    double ram will be added later on? I see 512MB at the moment.

    -

    @Calin said:
    Hello, today is the big day, after wake up I start delivering VPS.After delivery all the VPS i'm start add additional of 512 MB for those who have left the number of invoices in comments I'll leave "Thank you" to every comment that left the number of invoices to take into account the progress of VPS additional ram, wish me good luck because are 300+ orders :)

  • ask_seek_knockask_seek_knock Member

    @r4h156 said: Is anyone else experiencing extremely high load when torrenting on their VPS?

    Yeah, similar situation here. Transmission-bt was unresponsive when two torrents (2 files in total) added, but SSH is fine, and the load is about 0.3. The web interface became working after several minutes.

    I was surprised when seeing the result of "lscpu", CPU of 32nm process, that reminded me of my first computer.

    Anyway, many thanks to Calin for this affordable offer.
    All I could ask are IPv6 access and a decent uptime.

    Thanked by 1Calin
  • CalinCalin ⚠️ Patron Provider Tag Suspended

    Hello @Kebab i m change more setting on raid controller , check again please in next 10 minutes

    Regards,
    Calin

  • MaouniqueMaounique Host Rep, Veteran

    BTW, you have to self-provision this. I had no idea, my first VPS of this kind, albeit I did have other NAT ones, they were using different panel.
    Upgraded to bullseye, everything went smooth.

    Thanked by 1Calin
  • CalinCalin ⚠️ Patron Provider Tag Suspended

    Hello @Maounique that it s very corrected , iHostART every time surprises you ;)

  • wwwrootswwwroots Member

    @Calin said:
    Hello @Maounique that it s very corrected , iHostART every time surprises you ;)

    hi sir, my nat vps still pending :( :(

  • develondevelon Member

    @wwwroots said:

    @Calin said:
    Hello @Maounique that it s very corrected , iHostART every time surprises you ;)

    hi sir, my nat vps still pending :( :(

    Same with mine. Still waiting since April 15th.

  • COLBYLICIOUSCOLBYLICIOUS Member

    Out of stock. :(

  • wwwrootswwwroots Member
    edited May 2023

    @develon said:

    @wwwroots said:

    @Calin said:
    Hello @Maounique that it s very corrected , iHostART every time surprises you ;)

    hi sir, my nat vps still pending :( :(

    Same with mine. Still waiting since April 15th.

    i dont know what happen but its been 2 day since 30 april.

  • SirNeoSirNeo Member

    hi sir, my nat vps still pending :( :(

    Same with mine. Still waiting since April 15th.

    i dont know what happen but its been 4 day since 30 april.

    2 days

    Thanked by 1wwwroots
  • bamboo4409bamboo4409 Member

    hope calin is extra slow in fulfilling orders for people pestering

    Thanked by 2bamboopuppy Warkos
  • zudazzudaz Member
    edited May 2023

    @bamboo4409 said:
    hope calin is extra slow in fulfilling orders for people pestering
    @Calin said:
    Hello , today delivery all VPS , maximum tomorrow finish , it s approx. 300 orders on pending
    Regards,
    Calin

    05/02/2023 21:47 GMT+3 :D

  • norristnorrist Member

    @bamboo4409 said:

    Oh Man. Already got Wireguard setup and it is working perfectly.

    Do you have any pointers to setting up Wireguard? I'm new to Wireguard, OpenVZ, and NAT VPSes, so I have a few learning curves going on. When I follow instructions for getting started with Wireguard, I get the error:

    [#] ip link add wg0 type wireguard
RTNETLINK answers: Operation not supported
Unable to access interface: Protocol not supported

    I think this might be because my linux kernel is only version 5.2. (I provisioned with the Ubuntu 22.04 image.) But I think with OpenVZ I am unable to update the kernel. I'm not sure what to try next. Thank you for any tips or links!

  • NeoonNeoon Community Contributor, Veteran

    @norrist said:

    @bamboo4409 said:

    Oh Man. Already got Wireguard setup and it is working perfectly.

    Do you have any pointers to setting up Wireguard? I'm new to Wireguard, OpenVZ, and NAT VPSes, so I have a few learning curves going on. When I follow instructions for getting started with Wireguard, I get the error:

    [#] ip link add wg0 type wireguard
RTNETLINK answers: Operation not supported
Unable to access interface: Protocol not supported

    I think this might be because my linux kernel is only version 5.2. (I provisioned with the Ubuntu 22.04 image.) But I think with OpenVZ I am unable to update the kernel. I'm not sure what to try next. Thank you for any tips or links!

    Wireguard in userspace.

    Thanked by 1Xrmaddness
  • XrmaddnessXrmaddness Member

    @norrist said:

    Do you have any pointers to setting up Wireguard? I'm new to Wireguard, OpenVZ, and NAT VPSes, so I have a few learning curves going on. When I follow instructions for getting started with Wireguard, I get the error:

    [#] ip link add wg0 type wireguard
RTNETLINK answers: Operation not supported
Unable to access interface: Protocol not supported

    I think this might be because my linux kernel is only version 5.2. (I provisioned with the Ubuntu 22.04 image.) But I think with OpenVZ I am unable to update the kernel. I'm not sure what to try next. Thank you for any tips or links!

    There could be more to it, but WireGuard would have to be enabled on the host as well. It's much easier to use one of the userspace implementations of WireGuard when you're operating in a container such as OpenVZ.

    There are a couple options, and there may be more than this:

    If you'd like a much less "hands-on" approach to installing WireGuard, @Nyr 's WireGuard-Install will handle all of this for you, mostly regardless of operating system or virtualization type: https://github.com/Nyr/wireguard-install

This discussion has been closed.