[SOLD OUT] Oneprovider - Europe i3-530 2x1000GB RAID, 4GB RAM, 1gbps port @ 10 Euros a month

johnnymatt · April 2017

@WSS I've done. Fuck'em. I'm pissed Off (and bored for the lack of info)
And ill do the same to a VPS Provider asking to convert my plans to a VPS Storage (they are useless, vps so hard oversold that you cannot use it for domains) or.... "Kiss my ass" and enjoy my Wall of Shame of VPS/Dedicated seller/reseller.

Hello
You dont reply to my only question.
Is it possible to know the ETA (Estimated Time of Arrival) of dedi-par-1111111.op-sss.com ? (you dont have to be precise).
I have read in several forums that people eu who did the order 6 April has already received it and the estimated wait time when i did the order was 3 days.
Thanks in advance for your attention, Have a Great Day.

Countdown has started.

WSS · April 2017

@johnnymatt said:
Countdown has started.

johnnymatt · April 2017

Our apologies for the long delay, we are trying our best to have the server delivered by Wednesday. We have received a lot of orders, hence this results with additional delivery delays. Until then, we appreciate your patience!

@WSS Let's see. I have a looot of patience. Maybe noooot

WSS · April 2017

johnnymatt · April 2017

Haha @WSS

Great News (5sec ago)

Dear XXXXX

We are pleased to inform you that the server you ordered has now been set up and is operational.

PLEASE READ THIS EMAIL IN FULL

Are they LET Users and maybe they saw my previous MSG Scared of me on the Data center ?

johnnymatt · April 2017

Better those Fails

Proud LEM (this game is without age)

theyeti · April 2017

So only one person has received it today?

WSS · April 2017

I asked them for my service, or a refund, and they offered a simple jerkoff response. Will give them until tomorrow, then transition the folks to a VPS, and put them on my "FOF" list.

theyeti · April 2017

@WSS said:
I asked them for my service, or a refund, and they offered a simple jerkoff response. Will give them until tomorrow, then transition the folks to a VPS, and put them on my "FOF" list.

what was the response?

WSS · April 2017

@theyeti said:
what was the response?

Somewhat condescending, actually. Plenty of suction at the tip, though:

Rest assured that you will get reimbursed if it ever comes to that, but we're trying
to deliver these servers as rapidly as possible. Business keeps on rolling behind
the curtain and we can't focus all of our energy only on the i3's in Paris.

Yura · April 2017

@WSS said:
OneProvider is on my "do not bother" list when this shit is over.

@WSS said:
I'll be more than happy to request a refund on Friday, and place them on my "Shitty CC reseller list.

@WSS said:
Will give them until tomorrow, then transition the folks to a VPS, and put them on my "FOF" list.

So many lists and still so little organization.

WSS · April 2017

@Yura said:

@WSS said:
OneProvider is on my "do not bother" list when this shit is over.

@WSS said:
I'll be more than happy to request a refund on Friday, and place them on my "Shitty CC reseller list.

@WSS said:
Will give them until tomorrow, then transition the folks to a VPS, and put them on my "FOF" list.

So many lists and still so little organization.

Adds Urea to my suck a doc.txt logfile

blablub123 · April 2017

I am afraid that we went out of stock of this configuration shortly after our initial announcement, in that case, we may be looking for more stock towards this week or by the next week. In that case we would be able to either put the pending order on waiting or have the order canceled and refunded. You may kindly let us know how you would like to proceed.

Mhhh...

FredQc · April 2017

WSS said: Business keeps on rolling behind the curtain and we can't focus all of our energy only on the i3's in Paris.

Wow, great customer service.

theyeti · April 2017

@blablub123 said:

I am afraid that we went out of stock of this configuration shortly after our initial announcement, in that case, we may be looking for more stock towards this week or by the next week. In that case we would be able to either put the pending order on waiting or have the order canceled and refunded. You may kindly let us know how you would like to proceed.

Mhhh...

when did you put in your original order?

AuroraZ · April 2017

Xenos said: Has anyone that ordered on 4/4 gotten their server?

Yes I have my server

WSS · April 2017

@FredQc said:

WSS said: Business keeps on rolling behind the curtain and we can't focus all of our energy only on the i3's in Paris.

Wow, great customer service.

Actually, I prefer the "You aren't important enough" response to being jerked off.. yet I got both. Not sure if it's time to cum yet, or not.

WSS · April 2017

Oh, look!

processor   : 0
vendor_id   : GenuineIntel
cpu family  : 6
model       : 37
model name  : Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz
stepping    : 5
microcode   : 0x2
cpu MHz     : 3058.883
[...]
root@(none):/home/oneprovider# df -h
Filesystem                                              Size  Used Avail Use% Mounted on
rootfs                                                  917G  1.5G  869G   1% /
[...]
root@(none):/home/oneprovider# free -h
             total       used       free     shared    buffers     cached
Mem:          3.8G       173M       3.6G         0B        17M        50M
-/+ buffers/cache:       106M       3.7G
Swap:         511M         0B       511M
root@(none):/home/oneprovider#

Yep. Got the lowest turd in the pile. Good enough for their needs, but probably won't be on my "go to" list, unless I feel like fucking with someone.

AuroraZ · April 2017

Nah mine is identical man. Got the 540 proc but no extras, which is kind of like my life, come to think about it.

WSS · April 2017

@AuroraZ Fuck these fucking fuckers. FUCK!

AuroraZ · April 2017

@WSS I think you have a fucking issue man. Myabe your shoes are tied to tight or something.

WSS · April 2017

@AuroraZ said:
@WSS I think you have a fucking issue man. Myabe your shoes are tied to tight or something.

Lemme take 'em off. BRB.

johnnymatt · April 2017

@WSS Network and Hard Disk. Same data in this thread.

If you want to check smartctl -a /dev/sg0

ou just have to clickkkkk there:

https://pastebin.com/d3VZJw9q

WSS · April 2017

Fuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu...

OnePrivder still sucks.

WSS · April 2017

Winner never quitie; quitier never win.

AuroraZ · April 2017

Hmmmm......

smartctl -a /dev/sg0
smartctl 5.43 2016-09-28 r4347 [i686-linux-2.6.32-696.el6.i686] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

Vendor:               Dell    
Product:              Virtual Disk    
Revision:             1028
User Capacity:        999,653,638,144 bytes [999 GB]
Logical block size:   512 bytes
Logical Unit id:      0x600508e00000000071cb2b997fcb3407
Device type:          disk
Local Time is:        Tue Apr 11 01:04:16 2017 CEST
Device does not support SMART

Error Counter logging not supported
Device does not support Self Test logging

johnnymatt · April 2017

@AuroraZ
I did this on CentOS 7
OU still CentOS6
Time to evolve from Stone age ?

sanvit · April 2017

Well, Ubuntu 16.XX and Debian 8 is back online

WSS · April 2017

root@(none):/home/oneprovider# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HE103SJ
Serial Number:    S2B7J90ZA11145
LU WWN Device Id: 5 0024e9 2039372d4
Firmware Version: 1AJ30001
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Tue Apr 11 01:15:06 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        ( 9300) seconds.
Offline data collection
capabilities:            (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 155) minutes.
SCT capabilities:          (0x003f) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       3119
  2 Throughput_Performance  0x0026   054   054   000    Old_age   Always       -       8699
  3 Spin_Up_Time            0x0023   072   071   025    Pre-fail  Always       -       8583
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       14
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       40628
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       16
 13 Read_Soft_Error_Rate    0x003a   100   100   000    Old_age   Always       -       0
191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       16
194 Temperature_Celsius     0x0002   064   047   000    Old_age   Always       -       32 (Min/Max 20/53)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   090   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   090   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       2
240 Head_Flying_Hours       0x0032   100   100   000    Old_age   Always       -       40628
241 Total_LBAs_Written      0x0032   252   252   000    Old_age   Always       -       0
242 Total_LBAs_Read         0x0032   252   252   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       1

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     40545         -
# 2  Short offline       Completed without error       00%     38911         -
# 3  Extended offline    Completed without error       00%         4         -
# 4  Short offline       Completed without error       00%         1         -

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@(none):/home/oneprovider# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HE103SJ
Serial Number:    S2B7J90ZA11155
LU WWN Device Id: 0 000000 000000000
Firmware Version: 1AJ30001
User Capacity:    137,438,952,960 bytes [137 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Tue Apr 11 01:15:30 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 137) The previous self-test completed having
                    a test element that failed and the
                    device is suspected of having handling
                    damage.
Total time to complete Offline 
data collection:        ( 9240) seconds.
Offline data collection
capabilities:            (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 154) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   001   001   051    Pre-fail  Always   FAILING_NOW 38080
  2 Throughput_Performance  0x0026   056   056   000    Old_age   Always       -       8422
  3 Spin_Up_Time            0x0023   071   070   025    Pre-fail  Always       -       8958
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       14
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       40628
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       16
 13 Read_Soft_Error_Rate    0x003a   100   100   000    Old_age   Always       -       0
191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       16
194 Temperature_Celsius     0x0002   064   049   000    Old_age   Always       -       27 (Min/Max 20/51)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   090   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   090   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0032   100   100   000    Old_age   Always       -       40628
241 Total_LBAs_Written      0x0032   252   252   000    Old_age   Always       -       0
242 Total_LBAs_Read         0x0032   252   252   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       1

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: handling damage??  90%     40542         0
# 2  Short offline       Completed: handling damage??  90%     38911         0
# 3  Extended offline    Completed without error       00%         2         -
# 4  Short offline       Completed without error       00%         1         -

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_handling_damage?? [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

AuroraZ · April 2017

@johnnymatt said:
@AuroraZ
I did this on CentOS 7
OU still CentOS6
Time to evolve from Stone age ?

I am lucky this installed man. I got stuck for almost a day and a half lol. I am going to leave it be for now.

Howdy, Stranger!

Categories

In this Discussion

[SOLD OUT] Oneprovider - Europe i3-530 2x1000GB RAID, 4GB RAM, 1gbps port @ 10 Euros a month

Comments

OnePrivder still sucks.

Howdy, Stranger!

Quick Links

Categories

In this Discussion

[SOLD OUT] Oneprovider - Europe i3-530 2x1000GB RAID, 4GB RAM, 1gbps port @ 10 Euros a month

Comments

OnePrivder still sucks.