New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
★ VirMach ★ RYZEN ★ NVMe ★★ $8.88/YR- 384MB ★★ $21.85/YR- 2.5GB ★ Instant ★ Japan Pre-order ★ & More
This discussion has been closed.
Comments
/mnt/etc/resolv.confshould have been your original resolv.confPlease make a
/mnt/etc/resolv.conffile with the following entrys and then try to continue the above.Well we tried, unfortunately this did not work out.
I guess after the last few months of doing the easier stuff only the real problems are left.
resolv.conf is already present in that folder and has those nameservers in them.
Any idea what might be going on here and how to fix it?
Can you please skip that step and try
chroot /mnt /bin/bashand see if you still get errors?Here is what I get:
Unfortunately bash is not where I think it is in your system so I have continued the conversation in PM giving you direction on how to find where it is and correct this.
PHXZ003 is off again.
I may have broken my vps on PHXZ004 when I was operating from CP to install TinyCoreLinux...
Do you plan on releasing this? It looks fantastic!
@Virmach Shared-1 fall down some days ago and still not working. I can not login to cPanel ("Action Failed Unable to auto-login. Please contact support.") or do anything with this service. I can not take backups or connect to FTP. If you are moved shared hosting to another server plz tell me new IP and new credentials.
We had to move it, most the downtime was from an unrelated issue before the migration. I'm still finalizing it but doing a lot of things so I haven't completed it. I was going to send out emails yesterday and now it's today.
It's not offline, it's struggling because network hasn't been updated for that location yet. That one we don't have our own switch either, it's going to take longer.
There's backlog of requests for like a week now. It seems like once I'm done with all this I need to just travel between all the locations permanently to maintain them.
PHXZ004 The network is interrupted, I can reinstall the system to connect VNC, but the network is not connected.
Tokyo storage is dead again, lose connection, quiet unstable since deployed. I noticed it's happened serval times, please check it,
@VirMach
Please give me a working IP. After a forced migration (RYZE.PHX-Z002.VMS), VDS was launched only two weeks later. But they gave me someone else's IP address! The IP is actively being used by someone else on the network. And now even in arp it showed no mac gateway (incomplete) and does not see neighboring stations. Looks like my host got banned. From the outside world, the IP of another duplicate host pings perfectly. Instead of processing my ticket and giving me another IP, it looks like they just banned me. Thank you very much friends. Finally solve the issue. Ticket #424283.
@VirMach
Ticket #202109 any update on this ticket?
Node：LAKVM26
I have lost my server for a long long time. Plesae help me.
@VirMach any update on ISO sync for nodes with issues in LAX?
@VirMach please fix my issue. Ticket #788809 . Its been more than one week my website is down and no body does anything.
@VirMach SJCZ004 IP: 185.149.21.xxx Operation Timed Out After 90001 Milliseconds With 0 Bytes Received
Yep, the VNC keep showing "authentication failed". No improvement until today...
Just wanted to say thanks VirMach. Still grateful for the service you provide and am hopeful that all issues will be resolved eventually!
I want to order
2.5GB RAM -- Limit 800 Quantity
50GB NVMe
2 vCore Ryzen* CPU
6TB @ 1Gbps Bandwidth
1x IPv4 Address
$21.85/YR (RECURRING)
do you have any offers running ?
I want to receive a Tokyo node
2.5GB RAM --
50GB NVMe
2 vCore Ryzen* CPUs
6TB @ 1Gbps Bandwidth
1 IPv4 address
21.85 USD/year (recurring fee)
Any spare can be transferred to me
Thank you
Same as me. The upload speed is limited to 50Mbps.
I couldn't reproduce that on tyoz027. I'm getting at least 10MiB/s+ with wget (single thread) from multiple locations. Could anything that you were running make virmach's script think you were abusing the network? (I'm not judging or assuming anything, just comming up with some possibilites.)
And if iperf3 is running on windows as a client, the results can be way lower than it should be when ping goes a little bit high.
Ookla's speedtest results:
japan server, https://www.speedtest.net/result/c/ceaf2623-a333-46d8-bcb1-ab7ab56be258
brazil server, https://www.speedtest.net/result/c/eb778882-f1cc-4213-8ea6-2323dbdf419a
Have you tried reinstalling the OS? Same happened to mine on TYOC029 and reinstallation fixed that.
Main IP pings: false
Node Online: false
Service online: online
node: PHXZ004
Please help to check.
I'm willing to transfer my VirMach 2.5 GB RAM 2 Ryzen 5950X cores 50GB NVMe 6TB bandwidth VPS in Tokyo at the initial price. Is it possible to transfer?
I want to How to contact you
I want this vps
I heard that in the past you could transfer by opening a ticket, but I am not sure if transfers are still allowed. In any case, VirMach has many many tickets right now, so transfers will take time. Also, technically you could probably change the owner of the server by changing the email address, but I think that they would not allow you to do that.
Yeah, that's what I think too. Not as easy as GreenCloud and HostHatch.
I can't find any info on VirMach's transfer policy that isn't years old. Hopefully someone knows it, I'd be interested in picking up a special.