38.69$/yr VPS Storage KVM/3 TB Storage/1 GB DDr4/1core/Ignore DMCA/1x IPv4/Instant delivery

StarryMoe

Invoice #3977
Please add 1gb extra ram, thanks!

dz_paji

Invoice #3982
Good offer, it came just as I need it! Thanks man.

Hax

Invoice #3985

M_Ordinateur

Invoice #3986
Thanks

vine

Invoice #3984，1gb extra ram，THX~

ldclover

Invoice #3987
Thanks !

Pospa

Invoice #3983 for 1GB RAM upgrade, thanks!

10thHouse

I'm invoice #3988, so I have not been able to pay yet, but I created a ticket asking for XMR payment. Thanks in advance.

qeba

Invoice #3989, thank you

Calin

Yeap again stock off.... We waiting new power supplies for delivery , because our servers right now it's overloaded (electricity usage it's 600+ watts and power supply just 800w) and after this we try added more stock because our storage servers still have lot of empty bays in back of server so why not usage?

Who meet IOsteal problem , start fixed in next 2-3 days , that happened because e5-2687W v4 leave so much hot air what give instantly down clock , we waiting for new type fans to delivery

Regards

James0807

I still didnt get extra RAM for Invoice 3942

josek

@Calin , one question please,

Can I upload a custom .iso?
Hopefully so, since I would like to order one.

Jiuzhou

Please process the refund. Thans.

pfoo

@James0807 said:
I still didnt get extra RAM for Invoice 3942

Same here for Invoice #3981
thank you

josek

Invoice #4002 Paid ; please add extra ram

and my question in Ticket: #DGX-506322

thanks !

10thHouse

Now that I have paid invoice #3988, I would like one more GB of RAM, please.

strictlyparmesan

@strictlyparmesan said:
Invoice #3980

Much thanks!

Still haven't received my free extra ram

top - 17:32:36 up 1 day, 3:41, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 74 total, 1 running, 73 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 98.7 id, 0.0 wa, 0.0 hi, 0.0 si, 1.3 st
MiB Mem : 964.6 total, 740.4 free, 52.5 used, 171.8 buff/cache
MiB Swap: 0.0 total, 0.0 free, 0.0 used. 777.2 avail Mem

Calin

@strictlyparmesan said: Still haven't received my free extra ram

>

Hello in next 1-2 days we apply to all the ram upgrade

Regards

Calin

Hello everyone , we upgrade ram memory to all , and we fixed CPU problems
Regards

ontheair

Is the storage partition slow at the moment?
ext4 formatting is running since 3 hours and not done yet.

Calin

@ontheair said: ext4 partitioning is running since 3 hours and not done yet.

>

Hello that happened because I/O it's limited to 40 MB/s

Regards

josek

@Calin said:
Hello everyone , we upgrade ram memory to all , and we fixed CPU problems
Regards

Hi @Calin , could you activate my order please? It is still in "pending" status even though it has already been paid yesterday.
I also left you a ticket with the ".iso" (direct url) to mount it please.

Invoice #4002 Paid ; please add extra ram
and my question in Ticket: #DGX-506322

thanks !

thx thx

pfoo

@Calin said:

@ontheair said: ext4 partitioning is running since 3 hours and not done yet.

>

Hello that happened because I/O it's limited to 40 MB/s

Regards

For me in always end up like this in dmesg :

[68858.673020] ata4.00: exception Emask 0x0 SAct 0x18000220 SErr 0x0 action 0x6 frozen
[68858.673274] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.673784] ata4.00: cmd 61/08:28:00:00:80/00:00:f9:00:00/40 tag 5 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.674091] ata4.00: status: { DRDY }
[68858.674243] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.674388] ata4.00: cmd 61/08:48:00:00:80/00:00:fa:00:00/40 tag 9 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.674687] ata4.00: status: { DRDY }
[68858.674829] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.674977] ata4.00: cmd 61/08:d8:00:00:40/00:00:f7:00:00/40 tag 27 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.675288] ata4.00: status: { DRDY }
[68858.675425] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.675572] ata4.00: cmd 61/08:e0:00:00:80/00:00:f7:00:00/40 tag 28 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.675858] ata4.00: status: { DRDY }
[68858.676029] ata4: hard resetting link
[68859.376700] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[68859.377539] ata4.00: configured for UDMA/100
[68859.377739] ata4.00: device reported invalid CHS sector 0
[68859.377863] ata4.00: device reported invalid CHS sector 0
[68859.377981] ata4.00: device reported invalid CHS sector 0
[68859.378120] ata4.00: device reported invalid CHS sector 0
[68859.378286] ata4: EH complete

Never try to let it run for more than 1h .. but if 3h is not enought to make the filesystem it is going to be hard

ontheair

@pfoo said:

@Calin said:

@ontheair said: ext4 partitioning is running since 3 hours and not done yet.

>

Hello that happened because I/O it's limited to 40 MB/s

Regards

For me in always end up like this in dmesg :

[68858.673020] ata4.00: exception Emask 0x0 SAct 0x18000220 SErr 0x0 action 0x6 frozen
[68858.673274] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.673784] ata4.00: cmd 61/08:28:00:00:80/00:00:f9:00:00/40 tag 5 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.674091] ata4.00: status: { DRDY }
[68858.674243] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.674388] ata4.00: cmd 61/08:48:00:00:80/00:00:fa:00:00/40 tag 9 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.674687] ata4.00: status: { DRDY }
[68858.674829] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.674977] ata4.00: cmd 61/08:d8:00:00:40/00:00:f7:00:00/40 tag 27 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.675288] ata4.00: status: { DRDY }
[68858.675425] ata4.00: failed command: WRITE FPDMA QUEUED
[68858.675572] ata4.00: cmd 61/08:e0:00:00:80/00:00:f7:00:00/40 tag 28 ncq dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[68858.675858] ata4.00: status: { DRDY }
[68858.676029] ata4: hard resetting link
[68859.376700] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[68859.377539] ata4.00: configured for UDMA/100
[68859.377739] ata4.00: device reported invalid CHS sector 0
[68859.377863] ata4.00: device reported invalid CHS sector 0
[68859.377981] ata4.00: device reported invalid CHS sector 0
[68859.378120] ata4.00: device reported invalid CHS sector 0
[68859.378286] ata4: EH complete

Never try to let it run for more than 1h .. but if 3h is not enought to make the filesystem it is going to be hard

I had the same situation yesterday. Tried again today, and formatting was successful within 2 or 3 minutes.

Calin

@pfoo said: Never try to let it run for more than 1h .. but if 3h is not enought to make the filesystem it is going to be hard

>

Hello open a ticket on website with this error please

Regards

thechan

no stock??

Calin

@thechan said: no stock??

>

Hello , we try added tomorrow , because we have lot of requests about when back on stock this storage VPSs

Regards

pfoo

@Calin said:

@pfoo said: Never try to let it run for more than 1h .. but if 3h is not enought to make the filesystem it is going to be hard

>

Hello open a ticket on website with this error please

Regards

It seems to be working now ! I'll open a ticket only if I encounter something similar again
Thanks !

Calin

@pfoo said: It seems to be working now ! I'll open a ticket only if I encounter something similar again

Thanks for feedback!!! Thanks sound very good

Calin

We added again VPS to stock https://panel.ihostart.com/index.php?rp=/store/cheap-storage-kvm-vps/vps-storage-cheap , for this time we added a stock of 48 VPS

Delivery for this VPS it's on 12-24 hours after order , any order what it's not paid in maximum 24 hours we delete

Regards,
Calin