Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


iHostART - 5.69$/yr 50 GB SSD&512 MB VPS DMCA Ignore & Leave invoice no. and duble ram 1x IPv4 NAT - Page 24
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

iHostART - 5.69$/yr 50 GB SSD&512 MB VPS DMCA Ignore & Leave invoice no. and duble ram 1x IPv4 NAT

1212224262739

Comments

  • @Ananchoreta said:
    @thrustyhawk

    Read the Mail:
    "For create VPS go on Actions > Provision > (Put you hostname and what
    password you want and what operating version you want"

    Login on https://ihostart.micronode.uk/

    Choose.OS and password and create the server.

    Thank you for your help.

    There is no VPS booked on my account. how can i provision it, when it is not even visible in the account.

    Thanked by 1Calin
  • @thrustyhawk
    You need to first provision it yourself on:
    https://ihostart.micronode.uk/
    Credentials you got send in the mail

    Not in your account:
    https://panel.ihostart.com

    You have got an email with "VPS Information"?

    Thanked by 1Calin
  • It is up here. It is only hidden behind massive cloudflare "are you sure, you are anything near to a human being" checks.

    Thanked by 1Calin
  • nickwarenickware Member
    edited May 2023

    How long does it take to get the "VPS Information" email?

    Thanked by 1Calin
  • Any progress about IPv6?

  • drakuladrakula Member

    Invoice #1679
    Please setup the RAM increase, thank you.

    Thanked by 1Calin
  • @nickware said:
    How long does it take to get the "VPS Information" email?

    About a fortnight for me. Should be faster for you, as @Calin started setting up the VPS on the latest server last weekend.

    Thanked by 2nickware Calin
  • AnanchoretaAnanchoreta Member
    edited May 2023

    Switched dropbear with openssh, in place upgrade to Debian 11 went smoothly, YABS below.

    Wed May 31 19:11:03 UTC 2023
    
    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 8 minutes
    Processor  : Intel(R) Xeon(R) CPU           X5650  @ 2.67GHz
    CPU cores  : 1 @ 2659.998 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ❌ Disabled
    RAM        : 512.0 MiB
    Swap       : 0.0 KiB
    Disk       : 49.1 GiB
    Distro     : Debian GNU/Linux 11 (bullseye)
    Kernel     : 4.19.0
    VM Type    : OPENVZ
    IPv4/IPv6  : ✔ Online / ❌ Offline
    
    IPv4 Network Information:
    ---------------------------------
    ISP        : Orange Romania Communication S.A
    ASN        : AS9050 ORANGE ROMANIA COMMUNICATION S.A
    Host       : Legaco Networks B.V
    Location   : Ashburn, Virginia (VA)
    Country    : United States
    
    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 10.62 MB/s    (2.6k) | 86.39 MB/s    (1.3k)
    Write      | 10.64 MB/s    (2.6k) | 86.84 MB/s    (1.3k)
    Total      | 21.27 MB/s    (5.3k) | 173.23 MB/s   (2.7k)
               |                      |                     
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 127.05 MB/s    (248) | 140.10 MB/s    (136)
    Write      | 133.80 MB/s    (261) | 149.43 MB/s    (145)
    Total      | 260.85 MB/s    (509) | 289.54 MB/s    (281)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
    -----           | -----                     | ----            | ----            | ----           
    Clouvider       | London, UK (10G)          | 185 Mbits/sec   | 818 Mbits/sec   | 55.4 ms        
    Scaleway        | Paris, FR (10G)           | busy            | 798 Mbits/sec   | 59.2 ms        
    NovoServe       | North Holland, NL (40G)   | busy            | busy            | 39.5 ms        
    Uztelecom       | Tashkent, UZ (10G)        | 132 Mbits/sec   | 721 Mbits/sec   | 108 ms         
    Clouvider       | NYC, NY, US (10G)         | 112 Mbits/sec   | 240 Mbits/sec   | 112 ms         
    Clouvider       | Dallas, TX, US (10G)      | 79.5 Mbits/sec  | 752 Mbits/sec   | 143 ms         
    Clouvider       | Los Angeles, CA, US (10G) | 93.5 Mbits/sec  | 712 Mbits/sec   | 168 ms    `
    
    Thanked by 1Calin
  • MaouniqueMaounique Host Rep, Veteran

    cpu?
    I am curious how it compares to the other node delivered earlier.

    Thanked by 1Calin
  • thrustyhawkthrustyhawk Member
    edited June 2023

    @Ananchoreta said:
    @thrustyhawk
    You need to first provision it yourself on:
    https://ihostart.micronode.uk/
    Credentials you got send in the mail

    Not in your account:
    https://panel.ihostart.com

    You have got an email with "VPS Information"?

    Come on man. i said multiple time that there is no VPS visible in my account.

    https://ibb.co/85GhFqK

  • CalinCalin Member, Patron Provider

    Hello @thrustyhawk please open ticket on website and replay you coming soon
    Regards

  • AnanchoretaAnanchoreta Member
    edited June 2023

    @thrustyhawk
    And I said two times you do not have to login at
    https://panel.ihostart.com (where your screenshot is from)
    but have to provision your VPN yourself at:
    https://ihostart.micronode.uk/
    As is written in the e-mail you have gotten.
    Two different sites!
    And yes, it is different from other providers, in that you have to "provision" the vps yourself, afterwards it will become visible in your order-account too.

    So in short.
    Open https://ihostart.micronode.uk/ (and fight with Cloudflare)
    Login with the credentials from the E-Mail
    Choose Dist, Name and Password and provision it. Done.
    And afterwards it pops up at: https://panel.ihostart.com

    And @tasi788 No, the site is up but really does want to know if you are human enough.

    Thanked by 1Calin
  • @Ananchoreta said:
    @thrustyhawk
    And I said two times you do not have to login at
    https://panel.ihostart.com (where your screenshot is from)
    but have to provision your VPN yourself at:
    https://ihostart.micronode.uk/
    As is written in the e-mail you have gotten.
    Two different sites!
    And yes, it is different from other providers, in that you have to "provision" the vps yourself, afterwards it will become visible in your order-account too.

    So in short.
    Open https://ihostart.micronode.uk/ (and fight with Cloudflare)
    Login with the credentials from the E-Mail
    Choose Dist, Name and Password and provision it. Done.
    And afterwards it pops up at: https://panel.ihostart.com

    And @tasi788 No, the site is up but really does want to know if you are human enough.

    I even can't dig ip from that domain, how do you open your site? from localhost ?

  • boardboard Member

    When can I get my 2nd VPS (ordered 16 May, paid 17 May)?

    Invoice #1692 - I already asked for double RAM.

    Thanked by 1Calin
  • @tasi788 said:
    I even can't dig ip from that domain, how do you open your site? from localhost ?

    Today with Chrome on Windows, but it also was up yesterday on Chrome Android.
    dnsforge as DNS-Server.
    Tested now with Edge and Google DNS, it also connects after the real human test.

    Maybe Cloudflare does like your VPN even less then mine?

  • @Ananchoreta said:

    @tasi788 said:
    I even can't dig ip from that domain, how do you open your site? from localhost ?

    Today with Chrome on Windows, but it also was up yesterday on Chrome Android.
    dnsforge as DNS-Server.
    Tested now with Edge and Google DNS, it also connects after the real human test.

    Maybe Cloudflare does like your VPN even less then mine?

    Why do you think I'm using VPN? If I were really using VPN, I should at least be able to dig out your "fancy" IP, right? The screenshot I shared earlier was the result of a test using Google Admin ToolBox, so I'm very confused by your claim.
    Why don't you try it yourself and see?
    https://toolbox.googleapps.com/apps/dig/#ANY/

    Thanked by 1Calin
  • AnanchoretaAnanchoreta Member
    edited June 2023

    @tasi788

    It is not my fancy IP. I am just a customer.

    https://toolbox.googleapps.com/apps/dig/#A/ --->188.114.96.1 & 188.114.97.1
    https://toolbox.googleapps.com/apps/dig/#AAAA/ --> 2a06:98c1:3121::1 & 2a06:98c1:3120::1

     dig ihostart.micronode.uk
    
    ; <<>> DiG 9.16.37-Debian <<>> ihostart.micronode.uk
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 62752
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
    
    ;; OPT PSEUDOSECTION:
    ; EDNS: version: 0, flags:; udp: 65494
    ;; QUESTION SECTION:
    ;ihostart.micronode.uk.         IN      A
    
    ;; ANSWER SECTION:
    ihostart.micronode.uk.  300     IN      A       188.114.96.3
    ihostart.micronode.uk.  300     IN      A       188.114.97.3
    
    ;; Query time: 33 msec
    ;; SERVER: 127.0.0.53#53(127.0.0.53)
    ;; WHEN: Thu Jun 01 12:45:06 UTC 2023
    ;; MSG SIZE  rcvd: 82
    
    Thanked by 1Calin
  • @Ananchoreta said:
    It is not my fancy IP. I am just a customer.

    https://toolbox.googleapps.com/apps/dig/#A/ --->188.114.96.1 & 188.114.97.1
    https://toolbox.googleapps.com/apps/dig/#AAAA/ --> 2a06:98c1:3121::1 & 2a06:98c1:3120::1

     dig ihostart.micronode.uk
    
    ; <<>> DiG 9.16.37-Debian <<>> ihostart.micronode.uk
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 62752
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
    
    ;; OPT PSEUDOSECTION:
    ; EDNS: version: 0, flags:; udp: 65494
    ;; QUESTION SECTION:
    ;ihostart.micronode.uk.         IN      A
    
    ;; ANSWER SECTION:
    ihostart.micronode.uk.  300     IN      A       188.114.96.3
    ihostart.micronode.uk.  300     IN      A       188.114.97.3
    
    ;; Query time: 33 msec
    ;; SERVER: 127.0.0.53#53(127.0.0.53)
    ;; WHEN: Thu Jun 01 12:45:06 UTC 2023
    ;; MSG SIZE  rcvd: 82
    

    LOL I'm saying speed.ihostart.com down, not ihostart.micronode.uk

  • @tasi788

    Ah, my mistake, I obviously need a coffee.
    speed.ihostart.com is down here too.
    the same with
    nat.ihostart.com

    So mea culpa and you are correct. ;)

    Thanked by 1Calin
  • @Ananchoreta said:
    @tasi788

    Ah, my mistake, I obviously need a coffee.
    speed.ihostart.com is down here too.
    the same with
    nat.ihostart.com

    So mea culpa and you are correct. ;)

    I think I need some coffee too. I should first confirm with you that we are talking about the same domain. My mistake.

    Thanked by 1Calin
  • netomxnetomx Moderator, Veteran

    @calin still waiting

    Thanked by 1Calin
  • SirNeoSirNeo Member

    Invoice #1861

    Thanked by 1Calin
  • is it possible to install debian minimal version with kernel modules like nfs ? the kernels headers are missing in the current versions.

    Thanked by 1Calin
  • Invoice #1872
    thank you

    Thanked by 1Calin
  • CalinCalin Member, Patron Provider

    Hello everyone , sorry for my inactivity from this thread , I m very happy for announcement all VPS has been delivery

    I'm start now for migrate old deals (VPS with HDD) to version with SSD and after this I m start additional ram memory

    I n same time , on this week all VPS have IPv6

    Regards,
    Calin

    Thanked by 4dclink Void harrison skag
  • dclinkdclink Member

    The port 80 or 443 forwarding not working

    As titled, I'm trying to figure out the port 80 HTTP traffic by port configuration forwarding (nginx, apache2) or using a reverse proxy solution, but it didn't work.

    Would you please provide a port forwarding solution, since I'd like to host a website, I also tried URL redirection by setting a new DNS record, yet to succeed. (Url Redirect cant hide the port number)

    In summary, I need to find a solution to redirect HTTP traffic from port 80 to another port, which is granted.

    Your support is much appreciated and looking forward to your reply.

    Any thoughts on this?

    Thanked by 1Calin
  • @dclink said:
    The port 80 or 443 forwarding not working

    As titled, I'm trying to figure out the port 80 HTTP traffic by port configuration forwarding (nginx, apache2) or using a reverse proxy solution, but it didn't work.

    Would you please provide a port forwarding solution, since I'd like to host a website, I also tried URL redirection by setting a new DNS record, yet to succeed. (Url Redirect cant hide the port number)

    In summary, I need to find a solution to redirect HTTP traffic from port 80 to another port, which is granted.

    Your support is much appreciated and looking forward to your reply.

    Any thoughts on this?

    Use Cloudflare tunnel. Or use reverse proxy on other vps and forward the request to your romanian server.

    Thanked by 1dclink
  • MaouniqueMaounique Host Rep, Veteran

    @Calin said: I n same time , on this week all VPS have IPv6

    I don't have yet. You mean until Sunday?
    If so, that is great news :)

    Thanked by 1Calin
Sign In or Register to comment.