All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
SKRIME - AMD EPYC KVM VPS from 0.99€/mo - 1G plans moved to EPYC, same price - Eygelshoven, NL
The 1G plans run on AMD EPYC now
Our smallest plans used to sit on INTEL XEON E5-2697 v4. They've been moved to AMD EPYC Zen 3 Milan with ECC DDR4, at exactly the same price as before. Same 1.49€/mo, considerably more performance per core.
Included with all plans
- KVM virtualization with full root
- NVMe SSD in RAID 1
- DDoS Protection
- Unlimited traffic - no monthly volume, no counter, no per-GB overage
- 10 Gbps shared port
- IPv4 + IPv6 /64
- Location: SkyLink Datacenter, Eygelshoven, Netherlands
AMD EPYC
Host: AMD EPYC 7543/7763/7713, Zen 3 Milan, ECC DDR4, NVMe in RAID 1
| Plan | Cores | RAM | Storage | IPv4 | Price | Order |
|---|---|---|---|---|---|---|
| EPYC 1G (IPv6-only) | 1 | 1 GB | 10 GB | - | 0.99€/mo | Order |
| EPYC 1G | 1 | 1 GB | 10 GB | /32 | 1.49€/mo | Order |
| EPYC 8G | 2 | 8 GB | 50 GB | /32 | 6.99€/mo | Order |
AMD EPYC Configurator
| Example build | Price | Order |
|---|---|---|
| 2 Cores, 2 GB, 20 GB | 4.69€/mo | Order |
| 2 Cores, 4 GB, 40 GB | 6.39€/mo | Order |
| 2 Cores, 6 GB, 50 GB | 7.89€/mo | Order |
These are just some of our highlighted plans. We offer many more configurations on our website skri.me/epyc-config
Discounts
Code LET10 takes 10% off everything except the 1G plans. Billing terms are selectable on order and renewal, with 6 months at -5%, 12 months at -10% and 24 months at -15% on top - those apply to the 1G plans too.
Network & technical info
- Location: SkyLink Datacenter, Eygelshoven, Netherlands
- ASN: AS215365
- Test IPv4: 77.90.60.30
- Test IPv6: 2a09:3f00:3000::cafe
- Looking Glass: skrime.eu/network
- DDoS Protection included on all plans
Payment
PayPal, paysafecard, Creditcard, Alipay, SEPA Bank Transfer, Crypto
Questions? Happy to answer in this thread.

Comments
GLWS
Nice! Might need some more then. I presume this is only for new orders and not existing 1G servers
Hey @alexanderras,
Existing 1G servers can move over too, it isn't only for new orders. Open a ticket and we'll migrate yours, as long as we still have capacity on the EPYC side. There's a short downtime during the move.
Awesome - ticket created. Thanks!!
Is IPv6 /64 prefix routed?
Wow nice offers. GLWS!
Do you have yabs @SKRIME ?
@SKRIME want to try XEON 16G, but coupon LET10 doesnt work (Dieser Gutschein ist nicht für dieses Produkt gültig)
@ltk123 That's expected, LET10 doesn't apply to the XEON line. If you'd like the code to work, our EPYC 16G is the same 4 cores, 16 GB and 100 GB at 12.99€/mo, or 11.69€/mo with LET10. The XEON 16G stays at 6.99€/mo without the code, which still works out cheaper of the two.
@edmarhub
@Som It's on-link, so you can use addresses from the block directly on the interface but you can't route the /64 onwards to containers or an internal interface.
@SKRIME so discounts description "Code LET10 takes 10% off everything except the 1G plans. " is wrong you shoud correct it
Hey @ltk123,
Fair point on the wording. This post only covers our EPYC KVM plans, so "everything" was meant within that scope rather than across the whole lineup. LET10 applies to the EPYC plans here except the 1G ones.