Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Onidel Black Friday 2025 | EPYC Milan | Double Bandwidth | Storage VPS & S3 Storage in SG (PreOrder)

1235712

Comments

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad
    edited November 2025

    @abangnoob said:
    @onidel

    Questions about HDD Block Storage:
    1. Is it publicly accessible?
    2. Is it ready to use right out of the box, or is it like a blank VM? If it's ready to use right out of the box, how does it communicate with this server? Does it use FTP or something else?

    it is basically another disk that you can attach to or detach from a VM.

    Is it publicly accessible?

    No, it will only be available to the VM that you attach it to.

    Is it ready to use right out of the box, or is it like a blank VM? If it's ready to use right out of the box, how does it communicate with this server? Does it use FTP or something else?

    You attach a block storage to a VM, and VM OS will recognise a new disk (it's like you plug a USB drive to your computer), then you install a filesystem on it (ext4, xfs, etc) and mount it to a mount point e.g /mnt/something, then you can read and write data into it.

    hope this helps.

    Thanked by 1abangnoob
  • Is the 50% for HDD block storage an ongoing offer, or is that part of the Dec 2 end date?

    Thanked by 1onidel
  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad
    edited November 2025

    @Smigit said:
    Is the 50% for HDD block storage an ongoing offer, or is that part of the Dec 2 end date?

    all offers in the OP will end on the 2nd of Dec.

    Thanked by 1MolinJ
  • @onidel said:

    @Smigit said:
    Is the 50% for HDD block storage an ongoing offer, or is that part of the Dec 2 end date?

    all offers in the OP will end on the 2nd of Dec.

    Thanks. Better jump on it then

    Thanked by 1onidel
  • xenstarxenstar Member
    edited November 2025

    Dear Onidel, bought a server during last year offer. Now if I want to add 20GB NVME, it's increasing the price to 194.88AUD/year. https://snipboard.io/HiOzNQ.jpg

    It's quite unfair that for 20GB increase, I have to pay full price, and not pro-rate increase.

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @xenstar said:
    Dear Onidel, bought a server during last year offer. Now if I want to add 20GB NVME, it's increasing the price to 194.88AUD/year. https://snipboard.io/HiOzNQ.jpg

    It's quite unfair that for 20GB increase, I have to pay full price, and not pro-rate increase.

    "unfair" seems to be ... unfair to us ;)

    promotional plans were never designed to support upgrades. this is why it is important to choose the right specifications before purchasing. if upgrades were allowed while keeping the promotional discount, anyone could buy the minimum specs just to secure the low rate and upgrade later - seems unfair to providers ;)

    that said, we are working on an update that will let you upgrade disk space without losing your promotional discount. You will just pay the regular price for the extra disk. No ETA though, as this is a nice-to-have feature.

  • @onidel said: that said, we are working on an update that will let you upgrade disk space without losing your promotional discount. You will just pay the regular price for the extra disk. No ETA though, as this is a nice-to-have feature.

    that would be great. Thanks for the reply.

  • daps94daps94 Member
    edited November 2025

    looks good bought some. GLWS :)

    Thanked by 1onidel
  • Interested in OniBox - Storage VM?

    Is there a promotion for double or triple bandwidth if I comment here?

    Thanked by 1d0m1234
  • duxscoduxsco Member
    edited November 2025

    I am interested in the VMs of @onidel, but would like to know whether these requirements can be met:
    https://duxsco.de/#14-system-requirements

    Furthermore, how is peering, especially to DTAG? And, can I have AMD SEV-SNP enabled?

    UPDATE: I know it's better to have a dedicated server security-wise. But, pricing. And, I just don't want to deviate from my guide due to lazyness.

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @abangnoob said:
    Interested in OniBox - Storage VM?

    Is there a promotion for double or triple bandwidth if I comment here?

    no. wanted to keep this thread clean :joy:

    @duxsco said:
    I am interested in the VMs of @onidel, but would like to know whether these requirements can be met:
    https://duxsco.de/#14-system-requirements

    Furthermore, how is peering, especially to DTAG? And, can I have AMD SEV-SNP enabled?

    UPDATE: I know it's better to have a dedicated server security-wise. But, pricing. And, I just don't want to deviate from my guide due to lazyness.

    You can enable TPM and AMD SEV-SNP yourself from our control panel. Only issue is SEV-SNP is not working with TPM at the moment :/

    Thanked by 2MolinJ duxsco
  • @onidel said:
    You can enable TPM and AMD SEV-SNP yourself from our control panel. Only issue is SEV-SNP is not working with TPM at the moment :/

    thx for the info. If needed, I can live without TPM. Does Secure Boot and UEFI work with SEV-SNP?

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @duxsco said:

    @onidel said:
    You can enable TPM and AMD SEV-SNP yourself from our control panel. Only issue is SEV-SNP is not working with TPM at the moment :/

    thx for the info. If needed, I can live without TPM. Does Secure Boot and UEFI work with SEV-SNP?

    yes. you need to enable UEFI from our control panel (some images are using BIOS). the uefi firmware has secure boot enabled by default.

    also make sure your kernel is 6.11+ before you enable SEV-SNP, otherwise it can not boot.

    Thanked by 1duxsco
  • duxscoduxsco Member
    edited November 2025

    @onidel Currently trying to register. If this still holds true, why is AUD the default currency during registration? I wish for only my credit card company to do the currency conversion. Should I go with USD then?

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @duxsco said:
    @onidel Currently trying to register. If this still holds true, why is AUD the default currency during registration? I wish for my credt card company to do the currency conversion. Should I go with USD then?

    yeah you should go with USD. Other currencies will get different price everyday due to fx rate changes.

    Thanked by 2duxsco MolinJ
  • duxscoduxsco Member
    edited November 2025

    @onidel Can promo and annual payment discount be combined? I added the promo code "ONI-BF-2025", but the price doesn't change. Will the discount be added later on?

  • GLWS

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @duxsco said:
    @onidel Can promo and annual payment discount be combined? I added the promo code "ONI-BF-2025", but the price doesn't change. Will the discount be added later on?

    promo code will override the annual payment discount. what specs and payment term did you choose?

    Thanked by 1admax
  • I chose:

    • AMD Epyc Premium
    • Amsterdam
    • Custom ISO
    • ONI-2 (2 vCPU, 4GB RAM, 40 GB, 5TB@1Gbps, $0.0147/h)
    • Hourly payment cycle
    • Public IPv6
    • Promo Code ONI-BF-2025

    => Base Price $9.90/mo
    => Total 0.015 USD/hour

    I didn't click on "Deploy Now" yet.

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @duxsco said:
    I chose:

    • AMD Epyc Premium
    • Amsterdam
    • Custom ISO
    • ONI-2 (2 vCPU, 4GB RAM, 40 GB, 5TB@1Gbps, $0.0147/h)
    • Hourly payment cycle
    • Public IPv6
    • Promo Code ONI-BF-2025

    => Base Price $9.90/mo
    => Total 0.015 USD/hour

    I didn't click on "Deploy Now" yet.

    the promo does not apply to hourly billing.

    also make sure to click the green tick next to the promo code textbox to apply (not the best UX I know)

  • thx. With the click on the green tick and after choosing annual payment, the 60% got applied.

    Thanked by 1onidel
  • yongsikleeyongsiklee Member, Host Rep
    edited November 2025

    @onidel Do you not allow Virtualization? I cannot add a VM, bridged or routed.
    I mean I can add it but network is not working at all either thru bridged or routed. I rented an extra ip from you for a vm. Configuration is fine.
    Thanks.

  • Solid provider!

    Thanked by 1onidel
  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @yongsiklee said:
    @onidel Do you not allow Virtualization? I cannot add a VM, bridged or routed.
    I mean I can add it but network is not working at all either thru bridged or routed. I rented an extra ip from you for a vm. Configuration is fine.
    Thanks.

    should work with routed config. did you enable ip forward and arp proxy?

    Thanked by 1yongsiklee
  • yongsikleeyongsiklee Member, Host Rep
    edited November 2025

    @onidel said:

    @yongsiklee said:
    @onidel Do you not allow Virtualization? I cannot add a VM, bridged or routed.
    I mean I can add it but network is not working at all either thru bridged or routed. I rented an extra ip from you for a vm. Configuration is fine.
    Thanks.

    should work with routed config. did you enable ip forward and arp proxy?

    Yes I did. It did not work.

    I opened a ticket with the config file in it. I hope you closely look at it.

    Thank you.

    Thanked by 1onidel
  • R4ainR4ain Member
    edited November 2025

    Anyway I could get quarterly payments for S3 ?

  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @R4ain said:
    Anyway I could get quarterly payments for S3 ?

    no sorry :(

  • Question regarding S3 storage. If I need both Singapore and Sydney - should i at this moment contract 2x Singapore and later one of them will be moved to Sydney?

    Do you consider some other S3 storage locations? Specifically South America, Brazil?

    Thanked by 1onidel
  • onidelonidel Member, Patron Provider, Top Host, Megathread Squad

    @boria said:
    Question regarding S3 storage. If I need both Singapore and Sydney - should i at this moment contract 2x Singapore and later one of them will be moved to Sydney?

    yes, but only if you can wait and happy to use Singapore in the meantime. we do not have a firm ETA for Sydney yet.

    Do you consider some other S3 storage locations? Specifically South America, Brazil?

    there is no plan for South America yet, but we'll look into this :)

    Thanked by 3oloke cainyxues boria
Sign In or Register to comment.