New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Do a power off and on. Some VMs bug out when migrated between different cpu models like that.
Francisco
still same problem, is there any solution? My vps came from LUX to Switzerland at 2025.07.21, and all is good. But cpu load max is from 2025.08.01 to now.
Did you restart or do an actual power off and on?
Francisco
seems works after shut down power in Stallion rather than reboot command. but still hope you can mail to notice customer this issue first. CPU 100% lasted for 7 days before I discovered.
After all the stress of moving to CH has settled a bit.
Currently with the move to CH I'm unable to reach my vps via v6 from my isp (2003::/19 - AS3320). While everything else I tested from my vps via v6 or towards my vps via v6 from other networks seems to work perfectly fine.
I'm a bit unsure, if this is a fault of my isp, of course they say, the vps hoster is at fault. Or some side effects from the movement to CH datacenter and the currently missing HE uplink?
Its absolutely our fault since we're just cogent at the moment.
Once HE is up that should clear up.
Francisco
Is there a time estimate on the HE connection for CH?
Not sure if you are still involved with the tickets but I raised a ticket over a week ago about high steal on the VPS (50+% steal) and have not heard anything back yet: #155630
Thanks for any help you can offer
I would power off and on, maybe you got capped.
For HE we are waiting on them to finish the billing side. We just got transferred to a new rep today so let’s hope they figure it out. The port has been down for coming up a month.
Francisco
Thanks for the update on the HE port. Hope that the new rep figures it out.
Also thanks for the suggestion on the power off and on. I tried rebooting before and it did not change. But a power down and up on Stallion worked:
https://imgur.com/I3TOMuu
Green is reboot and blue is power down/up in Stallion. All back to normal thanks!
Anyone else had issue to disk layout/allocation ofter the migration from lux? my vm ran out of space and showed it was not running form disk?
~ # df -h
Filesystem Size Used Available Use% Mounted on
devtmpfs 10.0M 0 10.0M 0% /dev
shm 1.9G 0 1.9G 0% /dev/shm
/dev/sr0 63.0M 63.0M 0 100% /media/cdrom
tmpfs 1.9G 1.9G 0 100% /
tmpfs 785.5M 160.0K 785.3M 0% /run
/dev/loop0 19.9M 19.9M 0 100% /.modloop
after a reboot all files are lost and now the correct 80GB is showing. All was correct when hosted at lux.
@Francisco
Filesystem Size Used Available Use% Mounted on
devtmpfs 10.0M 0 10.0M 0% /dev
shm 1.9G 0 1.9G 0% /dev/shm
/dev/sr0 63.0M 63.0M 0 100% /media/cdrom
tmpfs 1.9G 1.9G 0 100% /
tmpfs 785.5M 160.0K 785.3M 0% /run
/dev/loop0 19.9M 19.9M 0 100% /.modloop
That's a wild one, were you in a live CD...?
You can ticket and we'll look around, but that's nothing on our end. Data was copied byte for byte. Many nodes have been rebooted for kernel updates w/o fault and things like that.
Francisco
Is there any update HE connection for CH?
Finally got things signed a couple days ago, was annoying. We should be hearing from provisioning very soon.
Francisco
Sounds good, hope v6 to AS3320 DTAG will be working again
Yeah I thought it was a good one as well! No not live cd all was fine on lux which was then moved and all fine but checked today and said out of disk your guys rebooted it now everything gone. I'll pm you the ticket.
does BuyVM restock any plans after the sale?
or it all redirects to Cloudzy?
You can buy on https://my.frantech.ca directly. Stocks random still, after the mix up on some nodes it ate into our available stock there.
The websites supposed to check frantech stock and only have the redirect when its out, but it seems to not work properly. I reported it to the guys to fix. Not my code.
Francisco
Hello. I have a support ticket on frantech that is unanswered for over a week.
ticket# 284067
Is there any update on when Lux will move to CH?
Oh folks, I really want to taste some swiss cheese.
I don't might if it's old aged or even a fake label where someone made Luetzenburgish cheese, imported those into Switzerland and re-labeled it. I don't care as long as it is a xx23,xx24 or xx25 from 39 (so if you have any of those - 1G/2G or 4G in CH and want to transfer: DM me*, but only for those from frantech. Thank you.)
Or: to frame it differently: restock CH when?
*) btw if you read this after Oct 15th 2025, do not DM before first checking if I did not asked not to be DMed anymore in this thread. Thank you.
Finished months ago.
Francisco
This should be good to go as well. HE went up a couple weeks ago
Francisco
Ok so why is my vps still on Luxemburg?
pardon my input as it has no value whatsoever but this post made me consider several possible reasons for a vps still being in Lux and made me lol and I had to say thanks.
Yeah, thanks.
I can reach my VPS via v6 again, latency via v6 from my home connection is now better then the v4 routing
I assure you it isn't. Maybe GEO IP...? Where do you see this?
Perfect
Took a bit longer, but it required changing a cross connect location on the Equinix side. Glad its done though!
Francisco
Well it was for sure a seamless change that I didn't even notice! Kudos for that Francisco!
Hello @Francisco,
Singapore feeling left out here… Any love for Singapore?
Is it possible to use BGP/anycast on new Cloudzy server orders? Don't see any mention of it at first glance.