New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Comments
Haha, after the reboot I ran kubectl get pods and saw that many containers were reporting errors, so I had to start them manually. I hadn’t read the post beforehand and didn’t prepare in advance, but I’ll make sure to pay attention next time.
I always install a open source monitoring agent in the vps, then i can see the charts about usages of cpu, mem, disk, network connections, network traffic , or some network metrics
Congratulations on the launch of your new website!
Using beszel and add multiple hosts in one view, create read only users for who want to see, it help you save time instead of create bunch of users on multiple hosts, and beszel is opensource, easy to setup too
or just install node exporter, who want to monitor it will setup prometheus and grafana theirself
Hello!
I woke up to see a message from Alexhost, whom I had asked to consider trying a power reset. They said there was ping after a reboot.
The server responds to IPv4 ping from here. This is what I have seen to far:
Edit to add:
Looks like IPv6 also is responding to ping.
Sorry for the inconvenience! Maybe I can look at the logs and find out something about what might have happened.
Thanks @alexhost!
Thanks guys! 
Next I write to Alexhost support to let them know the server seems okay. And eat breakfast. Add some new accounts. More. . . .
@Starnberg has been added on the node. Welcome @Starnberg!
Login info sent by PM!
Anyone else?
Next up are @seoky, @rickey, and @thenet.
Hi @seoky!
Login info sent via PM.
Sorry for the delay!
Hope you enjoy your new VPS!
Please let us know how it goes!
Thanks again for your application, and welcome to the server!
Tom
@thenet
Hello!
Welcome to our fun server! Hope you enjoy!
I just sent your PM with login info!
Please post here to let us know if you get in okay. Also, we would love to hear about your progress as your VPS gets installed and running.
The more and the better the posts we have here, the morer likely it is that the kind dono Providers will renew their donations and that additional donors will give more servers in more locations.
Thanks to @alexhost for our fun server!
Always best wishes!
Tom
Can you please PM me free VPS details? I'm going to host my portfolio website on this. 🙂
Hi
I would like to run
I really appreciate this offer and best wishes!
Hi @imranex!
Thanks for asking!
We can do something as soon as your profile shows a little more discussion and comment history.
Best wishes!
Tom
Did you mean "recursive"?
May I please ask how you plan to contribute to supporting open source projects? Also, which projects?
Isn't it less secure to use password authentication? How does password authentication benefit you?
I appreciate your application! Thank you! Best wishes to you too!
Thanks!
May we please have a link to your development source repository?
How is password login easier than ssh key login from an Android tablet?
Asking because I never used an Android tablet and don't know anything about them.
Thanks!
It's under the consideration of key management/distribution across multiple Android devices. And not all SSH clients are created equal on Android, as it might be more difficult for some clients to export/backup the private key.
I'll PM you my source repository. I would like to use the VPS to deploy some of my web applications for testing as well.
Hi everyone,
I just got access to my new VPS and ran a quick Geekbench 5 test.
Here are the results:
• Single-Core Score: 688
• Multi-Core Score: 2392
Many thanks to the donor providers for their generous support!
The VPS is working great, and I plan to use it for testing open-source projects.
I’ll keep sharing updates here.
Best regards,
thanks @Not_Oles
I just took a look at the logs.
It looks like the server started the reboot normally at about 22:02 but didn't come back up until Alexhost rebooted it about 23:15.
It also looks like we aren't going to be able to obtain much more information from the logs, because the logs aren't being kept during the reboot phase of the process.
I imagined that there might have been an issue with, for example, my setup of netplan. But from the logs, it appears that the netplan setup is okay. The network seemed fine before the first reboot and also fine after the second reboot was initiated by Alexhost support.
Should we try rebooting again, to test if there might be a repeatable issue? I vote yes. What do you think?
Maybe I am missing something here? Ideas? Thanks!
Hi again @BreakaWD!
I just PMed you login info!
Please post here to let us know whether you got in.
Please post here to let us know about your progress.
The better the discussions here, the more likely it is that our kind donor Providers
will renew their donations and that additional Providers will donate.
Thanks to Alexhost for this fine Chisinau server!
Thanks to OnlyServers for the awesome network on the London server!
Thanks to @fmxm for the Los Angeles server where FOSSVPS started! 
Free VPS Inventory
As of August 17, 2025
How To Get Your Request Approved
When somebody posts a request, and they have stuff like:
This isn't a list of rules or requirements. Just a few ideas to consider when writing your request.
More, or different stuff, might be okay. . . . Even brand new LETizens might be okay.
The more effort you invest in your request, the more likely your request will be approved.
Once you are in, it's lovely to post a little about what you are doing and how everything is going. Your contributions to higher quality discussion make it more likely that Providers will continue to donate servers and that FOSSVPS will continue giving away free VPSes to the community.
Hey guys,
I just got my new provisioned Moldovan VPS and here are some basic evaluation reports:
It is a quad-core VPS with 100 GiB of storage, capable to handle complex services and workloads like SQL databases.
Thanks @Not_Oles and @alexhost for the server! I'll keep you guys updated
@Not_Oles
What open source software do you want to run on your VPS?
I would run a Globalping probe inside Docker. This helps many of us with network diagnostics pretty much as we had mtr.sh in the past. The container only needs ~512MB RAM and from my experience barely uses any network.
https://dev.to/globalping/become-part-of-the-globalping-community-how-to-run-a-virtual-probe-1iia
How can FOSSVPS view you as a positive and friendly community contributor?
I like testing and running open source infrastructure tools. Hosting a Globalping probe from such rare or not that common location provides help for the project which I think is a good tool for most of us.
Which location do you want?
Chișinău, Moldova (Alexhost).
Are you okay with NAT IPv4 or do you need dedicated IPv4?
NAT IPv4 is fine.
SSH Public Key (ed25519):
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPqi+d665xL4m65JA1Agd3TQ2owpnkcg9D3SW7qbEDYk
@inthecloudblog
Hi! Nice to meet you!
What do you think about
and
Is what you want to do different from what is shown on the linked pages?
Thanks!
Tom
@Not_Oles good find,sir!
I’ll check the other locations you have if you ok with that.
Cheers 🍻
Progress report on my FOSSVPS.org server
I've received my VPS access yesterday and I've successfully logged in with my key. Today I have tested the VPS with the YABS benchmark https://github.com/masonr/yet-another-bench-script (open source bench test) which resulted in this output:
The VPS seems to be working just fine, and all of the resources seem to be more than enough for all the tests I'll be doing on it.
After that, I've added it to my hetrix tools monitoring, and installed the hetrix tools agent https://github.com/hetrixtools/agent (open source code, available on the link), to be able to monitor the VPS's resource usage. I can also share the public Hetrix Tools page, if @Not_Oles thinks it's a good idea.
Thanks again for the server, @Not_Oles, fossvps.org and the kind server donators! More reports coming soon
Nice, I like it, hope everyone can get.
What open source software do you want to run on your VPS?
- testing agentic flow using N8N or huginn or Node-RED or Kestra, also some dev testing, i like python, php and business intelligence.
How can FOSSVPS view you as a positive and friendly community contributor?
- I love and use open source, and all ima make going to be open too.
Which location do you want?
- LA
Are you okay with NAT IPv4 or do you need dedicated IPv4?
- Anything will be apreciated.
@jmaxwell
By mistake, I just reverted your VPS to its original "fresh" snapshot.
If I understand right, it means the pre-revert contents of your VPS have been lost.
The mistake happened because I was on the wrong server when I ran that command.
We have been using "vm1", "vm2", etc., on all the servers. Maybe ee need to change that to "servername-vm1", etc.
Probably you can get in with the original credentials previously sent. Please post here to let us know.
If you need help, I will try my best.
So sorry! Thanks and best wishes!
Tom
Clueless™ Administrator 🔥
Yeah, it happens to the best of us
Hi @piranga8!
Thanks for your application, which is approved. Welcome to FOSSVPS!
I just sent you a PM with login info.
Hope you have fun with your free Los Angeles VPS!
Thanks to @fmxm for donating the nice Los Angeles Node!
Best!
Tom