Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Estonia & The Netherlands 1Gbps Unmetered & 10Gbps Dedicated Server DEALS! **Instant Setup**

2456

Comments

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    I see your ticket - working on it!

    Thanked by 1Nuke142
  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @gtz said:

    @wa44io4 said:
    @VPSSLIM

    I ordered three servers and received only two, but I am still unable to access any of them. Unfortunately, the experience so far has been far from good. I am unable to use the automatic OS reinstall, boot the servers, or access the IP KVM.

    The installation of the system through the control panel was unsuccessful after the allocation of the machine due to possible problems with the system's bios settings. This problem has been solved on my side by their support. You need to check the BIOS settings via the noVNC KVM Console in the control panel. first boot network second boot hard disk PXE enabled Note that your boot override needs to be set to boot from the network card. Then reinstall the system via your control panel and it will work. 128G RAM yes. not 64GB.

    Glad all works now!

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @hoho said:

    @wa44io4 said:
    @VPSSLIM

    I ordered three servers and received only two, but I am still unable to access any of them. Unfortunately, the experience so far has been far from good. I am unable to use the automatic OS reinstall, boot the servers, or access the IP KVM.

    I have Same problem

    Solved for you? If not, PM me your ticket ID

  • SashkaProSashkaPro Member
    edited August 2025

    Guys, someone has experienced the same type of network mess that I have:

    Lets say, we got dedi with the following settings:
    IP: 69.12.83.123 (just a random IP)

    Suggested mask and GW (I can't see it anywhere in panel, that just my suggestion):
    Mask: /24 255.255.255.0
    GW: 69.12.83.1

    That "server IP" (69.12.83.123) we got from the first email.
    Next, we try to install OS via "prebuilt images", the server boots to PXE, trying to download necessary images and throws us an error that "can't download packages". So no OS installed.

    Okay. We mount our iso, installing OS via noVNC, but there is no internet at all on the server.
    We can't ping* gateway 69.12.83.1, and we can't SSH from outside; nothing is working.

    I already raised the ticket (879773), but maybe I'm just dumb?
    Maybe gateway not .1 ?

      • actually sometimes I can ping 69.12.83.1 but with huge packet loss (around 70-80%).
  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @SashkaPro said:
    Guys, someone has experienced the same type of network mess that I have:

    Lets say, we got dedi with the following settings:
    IP: 69.12.83.123 (just a random IP)

    Suggested mask and GW (I can't see it anywhere in panel, that just my suggestion):
    Mask: /24 255.255.255.0
    GW: 69.12.83.1

    That "server IP" (69.12.83.123) we got from the first email.
    Next, we try to install OS via "prebuilt images", the server boots to PXE, trying to download necessary images and throws us an error that "can't download packages". So no OS installed.

    Okay. We mount our iso, installing OS via noVNC, but there is no internet at all on the server.
    We can't ping* gateway 69.12.83.1, and we can't SSH from outside; nothing is working.

    I already raised the ticket (879773), but maybe I'm just dumb?
    Maybe gateway not .1 ?

      • actually sometimes I can ping 69.12.83.1 but with huge packet loss (around 70-80%).

    That's a strange issue but that's another dedicated server - not in this offer - I can see this b/c of the subnet. Anyhow, I want to investigate this myself. Do you have ticket ID for me by any chance?

  • @VPSSLIM said: That's a strange issue but that's another dedicated server

    May that's me :)
    Ticket #879773, v4 promo.

    So, for today, I can ping 69.12.83.1 with 70-80% packet loss. And even I was able to download some packages.

    But still not usable.

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @SashkaPro said:

    @VPSSLIM said: That's a strange issue but that's another dedicated server

    May that's me :)
    Ticket #879773, v4 promo.

    So, for today, I can ping 69.12.83.1 with 70-80% packet loss. And even I was able to download some packages.

    But still not usable.

    Sounds like a config issue. Will look into it.

  • Order Number: 2682681847

  • @VPSSLIM said: Sounds like a config issue. Will look into it.

    Okay, issue resolved.
    IPv6 left :)

  • YABS 2x Intel XEON E5-2695v4 64 GB DDR4 2x 1 TB SAMSUNG SSD 100 TB 10Gbps 49 EUR / month

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    #              Yet-Another-Bench-Script              #
    #                     v2025-04-20                    #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    
    Sat Aug  9 18:50:35 +05 2025
    
    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 18 minutes
    Processor  : Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
    CPU cores  : 72 @ 3300.000 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM        : 62.3 GiB
    Swap       : 4.0 GiB
    Disk       : 875.1 GiB
    Distro     : AlmaLinux 10.0 (Purple Lion)
    Kernel     : 6.12.0-55.24.1.el10_0.x86_64
    VM Type    : NONE
    IPv4/IPv6  : ✔ Online / ❌ Offline
    
    IPv4 Network Information:
    ---------------------------------
    ISP        : HostSlim B.V.
    ASN        : AS207083 HostSlim B.V.
    Host       : HostPapa
    Location   : Tallinn, Harjumaa (37)
    Country    : Estonia
    
    fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/md127):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 226.93 MB/s  (56.7k) | 331.84 MB/s   (5.1k)
    Write      | 227.53 MB/s  (56.8k) | 333.59 MB/s   (5.2k)
    Total      | 454.46 MB/s (113.6k) | 665.44 MB/s  (10.3k)
               |                      |
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 312.60 MB/s    (610) | 296.07 MB/s    (289)
    Write      | 329.21 MB/s    (642) | 315.78 MB/s    (308)
    Total      | 641.82 MB/s   (1.2k) | 611.86 MB/s    (597)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
    -----           | -----                     | ----            | ----            | ----
    Clouvider       | London, UK (10G)          | 5.18 Gbits/sec  | 3.86 Gbits/sec  | 38.0 ms
    Eranium         | Amsterdam, NL (100G)      | 9.18 Gbits/sec  | 8.28 Gbits/sec  | 28.4 ms
    Uztelecom       | Tashkent, UZ (10G)        | 8.90 Gbits/sec  | 7.30 Gbits/sec  | 51.7 ms
    Leaseweb        | Singapore, SG (10G)       | 3.21 Gbits/sec  | 3.20 Gbits/sec  | 185 ms
    Clouvider       | Los Angeles, CA, US (10G) | 1.01 Gbits/sec  | 1.12 Gbits/sec  | 165 ms
    Leaseweb        | NYC, NY, US (10G)         | 8.27 Gbits/sec  | 8.52 Gbits/sec  | 107 ms
    Edgoo           | Sao Paulo, BR (1G)        | 3.88 Gbits/sec  | 2.86 Gbits/sec  | 205 ms
    
    Geekbench 6 Benchmark Test:
    ---------------------------------
    Test            | Value
                    |
    Single Core     | 916
    Multi Core      | 7100
    Full Test       | https://browser.geekbench.com/v6/cpu/13241669
    
    YABS completed in 12 min 54 sec
    
    Thanked by 1VPSSLIM
  • @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

  • @VPSSLIM could you check order #2067164?
    Ordered 3 days ago, still in pending state.
    Ticket #051115
    Thanks.

  • Okay, guys who bought dedi
    May I ask you to ping 69.12.83.1 (this is our gateway) for approximately 30 minutes?

    I have flapping, 0.2-190ms latency, and around 5% packet loss (to the gateway). :'(

  • View Ticket #431255

  • hohohoho Member

    @SashkaPro said:
    Okay, guys who bought dedi
    May I ask you to ping 69.12.83.1 (this is our gateway) for approximately 30 minutes?

    I have flapping, 0.2-190ms latency, and around 5% packet loss (to the gateway). :'(

    yeah, I have this same problem. but ping 8.8.8.8 is stable。

  • gtzgtz Member
    edited August 2025

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    this need their support to sloved 。 > @wa44io4 said:

    @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

    in Boot
    1st boot Device Network
    2nd boot Device Hard disk

    NOTE:(if your system is UEFI boot not BIOS boot )
    UEFI Boot Drive BBS Priorites need set 1. network card 2 network card

    then rebuild OS from user control panel . reboot will auto set up.

    Advanced make sure your PEX enable

    like those picture show if this don't work need to get help form their support


  • @gtz said:

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    this need their support to sloved 。 > @wa44io4 said:

    @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

    1st boot Device Network
    2st boot Device Hard disk

    UEFI Boot Drive BBS Priorites need set 1. network card 2 network card

    then rebuild OS from user control panel . reboot will auto set up.

    Advanced make sure your PEX enable

    like those picture show if this don't work need to get help form their support

    I also have this problem, and they assigned me a machine with a damaged hard drive. They said it was fixed, but it has been five days now and I still cannot use this service, and I cannot open any VNC or IPMI, so I cannot modify the boot option. It's too sad. I just want to do a test and publish it on my evaluation blog ....

  • gtzgtz Member

    @zhujisou said:

    @gtz said:

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    this need their support to sloved 。 > @wa44io4 said:

    @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

    1st boot Device Network
    2st boot Device Hard disk

    UEFI Boot Drive BBS Priorites need set 1. network card 2 network card

    then rebuild OS from user control panel . reboot will auto set up.

    Advanced make sure your PEX enable

    like those picture show if this don't work need to get help form their support

    I also have this problem, and they assigned me a machine with a damaged hard drive. They said it was fixed, but it has been five days now and I still cannot use this service, and I cannot open any VNC or IPMI, so I cannot modify the boot option. It's too sad. I just want to do a test and publish it on my evaluation blog ....

    vnc support needs to be resolved by their support. Users cannot solve this problem by themselves.

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @gtz said:

    @zhujisou said:

    @gtz said:

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    this need their support to sloved 。 > @wa44io4 said:

    @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

    1st boot Device Network
    2st boot Device Hard disk

    UEFI Boot Drive BBS Priorites need set 1. network card 2 network card

    then rebuild OS from user control panel . reboot will auto set up.

    Advanced make sure your PEX enable

    like those picture show if this don't work need to get help form their support

    I also have this problem, and they assigned me a machine with a damaged hard drive. They said it was fixed, but it has been five days now and I still cannot use this service, and I cannot open any VNC or IPMI, so I cannot modify the boot option. It's too sad. I just want to do a test and publish it on my evaluation blog ....

    vnc support needs to be resolved by their support. Users cannot solve this problem by themselves.

    VNC should generally work as it works via a proxy. It's the same way for all servers so if one works for you, other should too. You sure it's not some java block?

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @VPSSLIM said:
    ONLY TODAY 6 AUGUST 2025 WE WILL LOWER THE PRICE OF THE EUR 44,95 DEAL TO 24,95 EURO PER MONTH!!! ONLY TODAY, NO HIDDEN FEES, NO HIDDEN TERMS AND NO PRICE HIKES.

    THE OFFER ESTONIA (28 in stock):

    2x Intel XEON E5-2650v2 - € 24,95

    • 2x Intel XEON E5-2650v2 CPU

    • 64 GB DDR3 RAM

    • 2x 500GB SATA PREMIUM SAMSUNG

    • 100 TB traffic p/m (1Gbit port!)

    • Linux OS

    • 1 Gbps dedicated uplink

    • 1 IPv4 address

    • /64 IPv6

    • 24/7 technical support

    • 24/7 emergency number

    • Statistics

    • Realtime reboot

    • Root access

    Order HERE! - INSTANT SETUP No setup FEE, instant setup! NOW € 24,95 --Click on CHECKOUT to see the promotion price--

    USE PROMO CODE: ESTDEALJUNE25

    Looks like I forgot the discontinue the promo code. Oh well, might as well let it run today too... 8 servers left for this price!

  • Nuke142Nuke142 Member
    edited August 2025

    @VPSSLIM said: 8 servers left for this price!

    Can you fix VNC or install Ubuntu? Two servers not works since buying (6 aug)

  • gtzgtz Member

    @VPSSLIM said:

    @gtz said:

    @zhujisou said:

    @gtz said:

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    this need their support to sloved 。 > @wa44io4 said:

    @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

    1st boot Device Network
    2st boot Device Hard disk

    UEFI Boot Drive BBS Priorites need set 1. network card 2 network card

    then rebuild OS from user control panel . reboot will auto set up.

    Advanced make sure your PEX enable

    like those picture show if this don't work need to get help form their support

    I also have this problem, and they assigned me a machine with a damaged hard drive. They said it was fixed, but it has been five days now and I still cannot use this service, and I cannot open any VNC or IPMI, so I cannot modify the boot option. It's too sad. I just want to do a test and publish it on my evaluation blog ....

    vnc support needs to be resolved by their support. Users cannot solve this problem by themselves.

    VNC should generally work as it works via a proxy. It's the same way for all servers so if one works for you, other should too. You sure it's not some java block?

    Generally speaking, yes. Unless they have issues with their native Java? I'm not sure about that. But I have no issues with it.

  • @VPSSLIM said: Looks like I forgot the discontinue the promo code. Oh well, might as well let it run today too... 8 servers left for this price!

    How about fixing the issues with the servers you have already sold?

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @wa44io4 said:

    @VPSSLIM said: Looks like I forgot the discontinue the promo code. Oh well, might as well let it run today too... 8 servers left for this price!

    How about fixing the issues with the servers you have already sold?

    If there's any issues with a client - of course we solve this - this doesn't mean we are not able to talk regarding a sales offer.

  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @gtz said:

    @VPSSLIM said:

    @gtz said:

    @zhujisou said:

    @gtz said:

    @Nuke142 said:
    I can't change BIOS settings because noVNC is not working. Same was two weeks ago when i take first machine and problem occurs with two new machines. Now i'm waiting when they install OS.

    this need their support to sloved 。 > @wa44io4 said:

    @gtz I tried the solution you suggested, but OS reinstallation still does not work. Support staff offered a manual OS reinstall, but that does not address the real problem.

    1st boot Device Network
    2st boot Device Hard disk

    UEFI Boot Drive BBS Priorites need set 1. network card 2 network card

    then rebuild OS from user control panel . reboot will auto set up.

    Advanced make sure your PEX enable

    like those picture show if this don't work need to get help form their support

    I also have this problem, and they assigned me a machine with a damaged hard drive. They said it was fixed, but it has been five days now and I still cannot use this service, and I cannot open any VNC or IPMI, so I cannot modify the boot option. It's too sad. I just want to do a test and publish it on my evaluation blog ....

    vnc support needs to be resolved by their support. Users cannot solve this problem by themselves.

    VNC should generally work as it works via a proxy. It's the same way for all servers so if one works for you, other should too. You sure it's not some java block?

    Generally speaking, yes. Unless they have issues with their native Java? I'm not sure about that. But I have no issues with it.

    Looking into your ticket as well

  • @VPSSLIM said: If there's any issues with a client - of course we solve this - this doesn't mean we are not able to talk regarding a sales offer.

    I am not in a position to question your rights. My point was that while clients from the first wave of the promotional offer have been unable to use their servers for four days, it would make sense to resolve their issues first, so new promotional customers do not face the same problems.

    Anyway, let’s see how long it takes to resolve the issues with the three servers I ordered.

    Thanked by 1Nuke142
  • SashkaProSashkaPro Member
    edited August 2025

    Okay guys, very interesting what's happening with v2.
    Grabbed one too.
    maybe there will be 10G lotto

  • @SashkaPro said: maybe there will be 10G lotto

    The server was provisioned, and I won the KVM/reinstall problem like the other guys.
    First time I got an ATEN Java error, and then noVNC shows just a black screen.
    reinstall via CP is stuck at "IPMI command: chassis power on"

    As I understand, Novnc acts as a proxy and attempts to establish a connection with 10.100.0.x:443 without success.

    Ticket created.

  • Nuke142Nuke142 Member
    edited August 2025

    My crazy history with this guy(s): Taken one server 23/07 - n/a via ssh/ping, not working VNC, etc.
    Next day they changed it to other machine (ip+1) - this one is unknown for me because of user/pw and OS reinstall not works via panel.
    Soon they reinstall it again and give me new user/pw.
    OK, this machine work and all was perfect almost a month, until.. read..

    Next i bought two new servers (6/08) - one with same IP that was in july (-1ip) and second new with next ip. Of course new machines n/a, etc - all same problems that was previous. But worse.
    All last week since buying is a nightmare - slow useless ticket response and (prepare to laught) 30 mins ago they REINSTALLED very first machine that works perfect since july and all data is lost. ARE YOU OK?
    Two new machines still n/a!
    You get what you pay. Hope they fix all this s**t sooner or later. Yes i am pissed as a dog.

    Thanked by 1wa44io4
  • VPSSLIMVPSSLIM Patron Provider, Veteran

    @Nuke142 said:
    My crazy history with this guy(s): Taken one server 23/07 - n/a via ssh/ping, not working VNC, etc.
    Next day they changed it to other machine (ip+1) - this one is unknown for me because of user/pw and OS reinstall not works via panel.
    Soon they reinstall it again and give me new user/pw.
    OK, this machine work and all was perfect almost a month, until.. read..

    Next i bought two new servers (6/08) - one with same IP that was in july (-1ip) and second new with next ip. Of course new machines n/a, etc - all same problems that was previous. But worse.
    All last week since buying is a nightmare - slow useless ticket response and (prepare to laught) 30 mins ago they REINSTALLED very first machine that works perfect since july and all data is lost. ARE YOU OK?
    Two new machines still n/a!
    You get what you pay. Hope they fix all this s**t sooner or later. Yes i am pissed as a dog.

    Hi! I looked into your ticket. You opened a ticket request about the server that has been re-installed according to request. It looks like in the ticket your selected the wrong server for the help request and we did not double check with you if it's actual the server you wanted re-installed. So that's a lesson for us to always double check and for you to always include as much as information as possible on which server / ip etc you want reinstalled as now you selected a support request with your other server.

    We are now looking in your other two servers as well.

Sign In or Register to comment.