New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Onlyfans Subscription
Unfortunately I still has extremely low speeds below 100Mbite , I will update my ticket
2024 EARLY BF SALE II
Virtualization - KVM
VCORES - 3 (Intel XEON E5-2680v4)
RAM - 4.5GB DDR4
RAID10 Storage - 125GB SSD
Bandwidth - 5TB
Port Speed - 1Gbit
IPv4 - 1
IPv6 - 1
Location - Netherlands
1 extra core
5 extra TB BW
$1,89/month (billed yearly!)
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Yet-Another-Bench-Script
v2025-04-20
https://github.com/masonr/yet-another-bench-script
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
Mon Jun 16 03:21:10 PM UTC 2025
Basic System Information:
Uptime : 102 days, 3 hours, 36 minutes
Processor : Intel(R) Xeon(R) CPU E5-2690 v4 @ 2.60GHz
CPU cores : 4 @ 2596.990 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 4.3 GiB
Swap : 0.0 KiB
Disk : 122.9 GiB
Distro : Ubuntu 22.04.5 LTS
Kernel : 5.15.0-46-generic
VM Type : KVM
IPv4/IPv6 : ✔ Online / ✔ Online
IPv6 Network Information:
ISP : ColocaTel Inc.
ASN : AS213438 ColocaTel Inc.
Host : ColocaTel Inc
Location : Amsterdam, North Holland (NH)
Country : The Netherlands
fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/vda1):
iperf3 Network Speed Tests (IPv4):
Provider | Location (Link) | Send Speed | Recv Speed
| Ping
----- | ----- | ---- | ----
| ----
Clouvider | London, UK (10G) | 1.18 Gbits/sec | 1.39 Gbits/sec
| 11.6 ms
Eranium | Amsterdam, NL (100G) | 1.75 Gbits/sec | 1.37 Gbits/sec
| 10.8 ms
Uztelecom | Tashkent, UZ (10G) | 775 Mbits/sec | 515 Mbits/sec
| 118 ms
Leaseweb | Singapore, SG (10G) | busy | busy
| 161 ms
Clouvider | Los Angeles, CA, US (10G) | 436 Mbits/sec | 288 Mbits/sec
| 140 ms
Leaseweb | NYC, NY, US (10G) | 430 Mbits/sec | 359 Mbits/sec
| 79.2 ms
Edgoo | Sao Paulo, BR (1G) | 362 Mbits/sec | 415 Mbits/sec
| 195 ms
iperf3 Network Speed Tests (IPv6):
Provider | Location (Link) | Send Speed | Recv Speed
| Ping
----- | ----- | ---- | ----
| ----
Clouvider | London, UK (10G) | 1.07 Gbits/sec | 978 Mbits/sec
| 11.6 ms
Eranium | Amsterdam, NL (100G) | 1.36 Gbits/sec | 870 Mbits/sec
| 10.8 ms
Uztelecom | Tashkent, UZ (10G) | 199 Mbits/sec | 488 Mbits/sec
| 136 ms
Leaseweb | Singapore, SG (10G) | 325 Mbits/sec | 288 Mbits/sec
| 161 ms
Clouvider | Los Angeles, CA, US (10G) | 477 Mbits/sec | 404 Mbits/sec
| 141 ms
Leaseweb | NYC, NY, US (10G) | 408 Mbits/sec | 447 Mbits/sec
| 78.9 ms
Edgoo | Sao Paulo, BR (1G) | 387 Mbits/sec | 274 Mbits/sec
| 195 ms
Geekbench 6 Benchmark Test:
Test | Value
|
Single Core | 685
Multi Core | 1748
Full Test | https://browser.geekbench.com/v6/cpu/12468633
Where's the 20G
Network is still slow for me. I can't reinstall VPS nor enable rescue mode from Virtualizor panel
For abnormal internet speeds, I recommend reinstalling the system via https://github.com/leitbogioro/Tools and https://github.com/bin456789/reinstall. In my experience, virtualizor images often have problems.
lol I tried to reinstall using https://github.com/bin456789/reinstall.
sudo rebootinside of the VPS, wait a few minutes it doesn't boot (?). Reboot from Virtualizor and then it booted back to Almalinux with slow network speed still. Welp.try this and wait for 15 minites.
Now it doesn't boot at all
Tried to ping it and it doesn't seem to be coming online. Well I'll wait for a few hours and try again. Probably have to open a ticket to fix this.
I'm sorry for this, I recommend it because I solved the problem with the script reinstall. It seems that it may be a problem with the backend configuration. it may restore to the original state by reinstalling in panel.
It's all good. The problem is I can't reinstall from the panel at all. It may be bugged to hell.
"There was an error in reinstalling the VPS" is not useful at all. And here I thought host providers use Virtualizor because it just works.
Had the same...
Reinstall Alma (don't know which version, try both), then enable rescue mode. This was the only way for me to get it back booting
Try this:
https://lowendtalk.com/discussion/comment/4448439#Comment_4448439
Do not forget to install and enable openssh in the chroot environment
I used fdisk instead of parted, care to set the boot flag
Care about your disk names (mine was vdb in rescue and vda after boot iirc)
I skipped creating a swap partition
Networking was a little trickier, I had to use ens3 instead of eth0
Care that ssh disables root password login by default, either change it in sshd_config or create a separate user in the chroot (did the latter)
Your VPS might be in the same state mine was after trying to install with that script. Rescue mode didn't activate and none of the OS options under install worked.
For me the solution was to mount an ISO from Settings -> VPS Configuration -> Select ISO -> Almalinux cuz its the first one and then move it to first in the boot order. Save, set it back to None, save again.
After doing this the VPS can be installed again from the panel. Classic case of pressing buttons 'till it works ":D"
I managed to solve this by shutting down the VPS and then reinstall, then it works (at least for ubuntu 24.04). But the network speed is still bad ...
Did you manage to install debian 12 and get good network speed like @Pilzbaum ?
Nope. I'm running NixOS installed on top of the AlmaLinux template and so far the speeds are still hanging in the 100-200Mbits region.
install deb11 and apt dist-upgrade.
works fine and fast.
I'm trying to get good network speed. I don't particularly care about the OS.
you should!
speed is fine.
@HostSlick I am still getting crap speeds:
I did! And the speed are still under 250Mbps. I think people who got better speed are just on another node that got upgraded. @HostSlick are you going to investigate this?
A friendly reminder that with storage servers, the I/O and network speeds will be poor for a week or so because everyone will be uploading their files to the server at the same time. Though these speeds are so low that it’s likely due to the poor network, but even if that is fixed, don’t be surprised if things are congested for some time.
Sure you're right send speed and receive speed are both f***** up cuz people are uploading files
Sure people are uploading files but it can't be THIS bad
Had and have no problem at all. Network is hitting 10 Gbps easily, storage is plenty fast. Transfered all my data already, still fast. I do not expect it to get better, rather worse when people start using it
Honestly one of the best deals I managed to grab in terms of price to performance ratio for my use cases. A tad more CPU could be beneficial but not required by me
Did you the use the provided OS image by the control panel ? Any special configuration?
I initially had AlmaLinux installed, reinstalled with Ubuntu 24.04 LTS - then 5 TB disk missing. Opened ticket and it was resolved within ~24 hours. Here's my YABS, not seeing slow speeds as others but as someone else in this thread mentioned it could be because they're on a different node.
No, used debootstrap using rescue mode (see my other comments) since no other image worked and my first yabs with Alma was not very performant.
While at Alma did you have poor network speed ?
So far, so good, it fulfills its function of media streaming plex + usenet for me.
@HostSlick 🔥
Yea its very Strange. Its Not congestion anywhere and all delivered at least are The Same node
I try something. I See Something was Changed in Alma 9 for the networking in The Kernel? As thats basically The First node/hypervisor i use alma 9 on itself. Should have done 8 instead. what a mess....
Im debugging, fixing and will Update Those via Ticket affected.
I also See it only Happens on some OS Templates.
I will do some Experiments with a Test vps and Change networking Driver and some Things to See If that fixes the weird issue
///written from Phone.