Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
Godlike VPS
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Shells Virtual Desktop

Categories

In this Discussion

Home › Requests
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

WTB vps 4c, 16gb ram, 200gb ssd, europe

13»

Comments

  • dev_vpsdev_vps Member

    @gbzret4d said:

    @dev_vps said:

    @raymond said:

    @dev_vps said:

    @gbzret4d said:

    @Kevinf100 said:

    24GB RAM
    6 EPYC cores ( 3 dedicated, 3 fair-shared cores)
    240GB NVMe RAID 10
    12TB @ 10Gbps port
    1 IPv4
    IPv6 /112
    $60/SEMI-YEARLY

    cant find this deal, could you share a link please?

    @SolidSeoVPS

    EPYC- 24GB

    24GB RAM
    6 EPYC cores ( 3 dedicated, 3 fair-shared cores)
    240GB NVMe RAID 10
    12TB @ 10Gbps port
    1 IPv4 and IPv6 /112
    $60/SEMI-YEARLY

    if this plan can run windows is good

    Any KVM based VPS can run Windows Server OS. The only thing to check if provider terms permit installing Windows Server OS.

    Linux based OS
    2x vCore / 2 GB

    Windows 11 Enterprise OS
    3x vCore / 4.5 GB

    I don't get it why a provider can or should permit installing windows os

    Because it is Windows Server OS

  • dev_vpsdev_vps Member

    @raymond said:

    @dev_vps said:

    @raymond said:

    @dev_vps said:

    @gbzret4d said:

    @Kevinf100 said:

    24GB RAM
    6 EPYC cores ( 3 dedicated, 3 fair-shared cores)
    240GB NVMe RAID 10
    12TB @ 10Gbps port
    1 IPv4
    IPv6 /112
    $60/SEMI-YEARLY

    cant find this deal, could you share a link please?

    @SolidSeoVPS

    EPYC- 24GB

    24GB RAM
    6 EPYC cores ( 3 dedicated, 3 fair-shared cores)
    240GB NVMe RAID 10
    12TB @ 10Gbps port
    1 IPv4 and IPv6 /112
    $60/SEMI-YEARLY

    if this plan can run windows is good

    Any KVM based VPS can run Windows Server OS. The only thing to check if provider terms permit installing Windows Server OS.

    Linux based OS
    2x vCore / 2 GB

    Windows 11 Enterprise OS
    3x vCore / 4.5 GB

    I am a newbie, I just wanna use the GUI OS like remote PC,

    so could you please tell me how to run Linux as you picture with GUI?

    I have installed MX Linux XFCE from its iso
    https://mxlinux.org/
    iso link:
    https://sourceforge.net/projects/mx-linux/files/Final/Xfce/MX-23.3_ahs_x64.iso/download

    and the plan can install Windows OS by myself?

    If control panel has Windows templates, it can be installed by using the template.

    If you have not much experience with installing OS, then you may go for windows rdp service. It may be more expensive, but you don't have to deal with installing the operating system.

    Check with @balramm DigiRDP

  • MumblyMumbly Member
    edited August 2024

    @raymond said: so could you please tell me how to run Linux as you picture with GUI?

    To connect to the dektop via RDP you can do on Debian something like:

    apt-get update -y && apt-get upgrade -y

apt install xfce4 xfce4-goodies xorg dbus-x11 x11-xserver-utils -y

apt install xrdp -y

adduser xrdp ssl-cert

systemctl restart xrdp
  • Kevinf100Kevinf100 Member
    edited August 2024

    @Mumbly said:

    @raymond said: so could you please tell me how to run Linux as you picture with GUI?

    To connect to the dektop via RDP you can do on Debian something like:

    apt-get update -y && apt-get upgrade -y

apt install xfce4 xfce4-goodies xorg dbus-x11 x11-xserver-utils -y

apt install xrdp -y

adduser xrdp ssl-cert

systemctl restart xrdp

    Compile it yourself or download from github. The pre-built ones in current repos suck and are very outdated. (The default ones)
    https://github.com/neutrinolabs/xrdp/wiki#building-from-sources
    https://github.com/neutrinolabs/xrdp/releases/tag/v0.10.1

  • dev_vpsdev_vps Member

    @Kevinf100 said:

    @Mumbly said:

    @raymond said: so could you please tell me how to run Linux as you picture with GUI?

    To connect to the dektop via RDP you can do on Debian something like:

    apt-get update -y && apt-get upgrade -y

apt install xfce4 xfce4-goodies xorg dbus-x11 x11-xserver-utils -y

apt install xrdp -y

adduser xrdp ssl-cert

systemctl restart xrdp

    Compile it yourself or download from github. The pre-built ones in current repos suck and are very outdated. (The default ones)
    https://github.com/neutrinolabs/xrdp/wiki#building-from-sources
    https://github.com/neutrinolabs/xrdp/releases/tag/v0.10.1

    Using NoMachines is much better than s.l.o.w xrdp

  • Kevinf100Kevinf100 Member

    @dev_vps said:

    @Kevinf100 said:

    @Mumbly said:

    @raymond said: so could you please tell me how to run Linux as you picture with GUI?

    To connect to the dektop via RDP you can do on Debian something like:

    apt-get update -y && apt-get upgrade -y

apt install xfce4 xfce4-goodies xorg dbus-x11 x11-xserver-utils -y

apt install xrdp -y

adduser xrdp ssl-cert

systemctl restart xrdp

    Compile it yourself or download from github. The pre-built ones in current repos suck and are very outdated. (The default ones)
    https://github.com/neutrinolabs/xrdp/wiki#building-from-sources
    https://github.com/neutrinolabs/xrdp/releases/tag/v0.10.1

    Using NoMachines is much better than s.l.o.w xrdp

    Never heard of it. Might test it later. I currently have xrdp that can only be accessed via an ssh tunnel.

  • itachikonohaitachikonoha Member

    @gbzret4d said:

    You are using your VPS productive? For idling the amount of cores is not relevant

    I use it for video encoding. ffmpeg doesn't need much RAM but cores are very important. More the cores, more parallel workers I can assign. RAM is of not much use here.

  • dev_vpsdev_vps Member

    This is to show that Windows Server OS is pretty resource optimized.

  • techdragontechdragon Member

    @dev_vps said:
    This is to show that Windows Server OS is pretty resource optimized.

    1.6GB RAM is a lot to some.

    Thanked by 1gbzret4d
  • Kevinf100Kevinf100 Member
    edited August 2024

    @Kevinf100 said:

    @dev_vps said:

    @Kevinf100 said:

    @Mumbly said:

    @raymond said: so could you please tell me how to run Linux as you picture with GUI?

    To connect to the dektop via RDP you can do on Debian something like:

    apt-get update -y && apt-get upgrade -y

apt install xfce4 xfce4-goodies xorg dbus-x11 x11-xserver-utils -y

apt install xrdp -y

adduser xrdp ssl-cert

systemctl restart xrdp

    Compile it yourself or download from github. The pre-built ones in current repos suck and are very outdated. (The default ones)
    https://github.com/neutrinolabs/xrdp/wiki#building-from-sources
    https://github.com/neutrinolabs/xrdp/releases/tag/v0.10.1

    Using NoMachines is much better than s.l.o.w xrdp

    Never heard of it. Might test it later. I currently have xrdp that can only be accessed via an ssh tunnel.

    Can confirm, no better than xrdp. Had two servers same spec side by side and looked the same playing a video.

    setup also sucks more and some features like auto scaling didn't work..

  • dev_vpsdev_vps Member
    edited August 2024

    @techdragon said:

    @dev_vps said:
    This is to show that Windows Server OS is pretty resource optimized.

    1.6GB RAM is a lot to some.

    Running for 120+ days ....

  • hyperblasthyperblast Member

    @dev_vps said:
    This is to show that Windows Server OS is pretty resource optimized.

    will you share your resource-saving optimizations with us?

  • dev_vpsdev_vps Member
    edited August 2024

    @hyperblast said:

    @dev_vps said:
    This is to show that Windows Server OS is pretty resource optimized.

    will you share your resource-saving optimizations with us?

    Check and set to Manual any not needed services

    1. Fax
2. WerSvc
3. WinRM
4. CscService
5. Spooler
6. WSearch
7. RemoteRegistry
8. seclogon
9. bthserv
10. TabletInputService
11. SCardSvr
12. WbioSrvc
13. stisvc
14. AeLookupSvc
15. Themes
16. wcncsvc
17. Mcx2Svc
18. iphlpsvc
19. W32Time
20. WMPNetworkSvc
21. wuauserv

    Here is a powershell script to set services to manual

    # List of services
# @dev_vps 
$services = @(
    "Fax",
    "WerSvc",
    "WinRM",
    "CscService",
    "Spooler",
    "WSearch",
    "RemoteRegistry",
    "seclogon",
    "bthserv",
    "TabletInputService",
    "SCardSvr",
    "WbioSrvc",
    "stisvc",
    "AeLookupSvc",
    "Themes",
    "wcncsvc",
    "Mcx2Svc",
    "iphlpsvc",
    "W32Time",
    "WMPNetworkSvc",
    "wuauserv"
)

# Set each service to manual startup type
foreach ($service in $services) {
    Set-Service -Name $service -StartupType Manual
    Write-Host "Set $service to Manual"
}

Write-Host "All specified services have been set to Manual."
    Thanked by 4khalequzzaman verd loay ehab
  • DylhostDylhost Member

    Who's your current host? That's an insane deal

  • DylhostDylhost Member
    edited September 2024

    @v3ng said:
    Hi,

    I'm happy to offer our Node 16GB G2 priced at €10 per month with annual payment :)
    Code: 0HXBAGZP

    Alternatively, you can use this code for monthly billing at €11:
    Code: CWLNWMAM

    6 AMD EPYC Milan Cores / 16GB DDR4 ECC RAM 3200MTs / 140GB Datacenter NVMe / 10Gbit/s uplink

    https://cloud.v6node.com/plans

    YABS:

    Sat Aug 24 19:00:00 UTC 2024

Basic System Information:
---------------------------------
Uptime     : 0 days, 0 hours, 0 minutes
Processor  : AMD EPYC 7B13 64-Core Processor
CPU cores  : 6 @ 2250.000 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 15.6 GiB
Swap       : 0.0 KiB
Disk       : 137.8 GiB
Distro     : Debian GNU/Linux 12 (bookworm)
Kernel     : 6.1.0-21-cloud-amd64
VM Type    : KVM
IPv4/IPv6  : ✔ Online / ✔ Online

IPv6 Network Information:
---------------------------------
ISP        : Ian David Klemm
ASN        : AS200461 Ian David Klemm
Host       : Ian David Klemm
Location   : Rotterdam, South Holland (ZH)
Country    : The Netherlands

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/sda1):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 347.04 MB/s  (86.7k) | 4.55 GB/s    (71.2k)
Write      | 347.95 MB/s  (86.9k) | 4.58 GB/s    (71.5k)
Total      | 694.99 MB/s (173.7k) | 9.13 GB/s   (142.7k)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 7.76 GB/s    (15.1k) | 6.42 GB/s     (6.2k)
Write      | 8.18 GB/s    (15.9k) | 6.85 GB/s     (6.6k)
Total      | 15.94 GB/s   (31.1k) | 13.27 GB/s   (12.9k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 3.50 Gbits/sec  | busy            | 39.2 ms        
Eranium         | Amsterdam, NL (100G)      | 7.18 Gbits/sec  | 5.61 Gbits/sec  | 7.46 ms        
Uztelecom       | Tashkent, UZ (10G)        | 1.23 Gbits/sec  | 1.31 Gbits/sec  | 93.0 ms        
Leaseweb        | Singapore, SG (10G)       | 901 Mbits/sec   | 1.10 Gbits/sec  | 163 ms         
Clouvider       | Los Angeles, CA, US (10G) | 1.04 Gbits/sec  | 1.14 Gbits/sec  | 140 ms         
Leaseweb        | NYC, NY, US (10G)         | 1.00 Gbits/sec  | 1.99 Gbits/sec  | 83.6 ms        
Edgoo           | Sao Paulo, BR (1G)        | 863 Mbits/sec   | 872 Mbits/sec   | 191 ms         

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | busy            | 139 Mbits/sec   | 36.2 ms        
Eranium         | Amsterdam, NL (100G)      | 6.55 Gbits/sec  | 5.46 Gbits/sec  | 7.48 ms        
Uztelecom       | Tashkent, UZ (10G)        | 1.00 Gbits/sec  | 1.13 Gbits/sec  | 92.7 ms        
Leaseweb        | Singapore, SG (10G)       | 903 Mbits/sec   | 1.09 Gbits/sec  | 162 ms         
Clouvider       | Los Angeles, CA, US (10G) | 503 Mbits/sec   | 900 Mbits/sec   | 140 ms         
Leaseweb        | NYC, NY, US (10G)         | 1.18 Gbits/sec  | 2.20 Gbits/sec  | 83.5 ms        
Edgoo           | Sao Paulo, BR (1G)        | 763 Mbits/sec   | 19.2 Mbits/sec  | 190 ms         

Geekbench 6 Benchmark Test:
---------------------------------
Test            | Value                         
                |                               
Single Core     | 1576                          
Multi Core      | 7072                          
Full Test       | https://browser.geekbench.com/v6/cpu/7479008

YABS completed in 12 min 4 sec

    What's the bandwidth on these?

    P.S. annual code doesn't work - it takes off 2.79 TOTAL, not monthly.

  • gbzret4dgbzret4d Member

    @Dylhost said:

    @v3ng said:
    Hi,

    I'm happy to offer our Node 16GB G2 priced at €10 per month with annual payment :)
    Code: 0HXBAGZP

    Alternatively, you can use this code for monthly billing at €11:
    Code: CWLNWMAM

    6 AMD EPYC Milan Cores / 16GB DDR4 ECC RAM 3200MTs / 140GB Datacenter NVMe / 10Gbit/s uplink

    https://cloud.v6node.com/plans

    YABS:

    Sat Aug 24 19:00:00 UTC 2024

Basic System Information:
---------------------------------
Uptime     : 0 days, 0 hours, 0 minutes
Processor  : AMD EPYC 7B13 64-Core Processor
CPU cores  : 6 @ 2250.000 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 15.6 GiB
Swap       : 0.0 KiB
Disk       : 137.8 GiB
Distro     : Debian GNU/Linux 12 (bookworm)
Kernel     : 6.1.0-21-cloud-amd64
VM Type    : KVM
IPv4/IPv6  : ✔ Online / ✔ Online

IPv6 Network Information:
---------------------------------
ISP        : Ian David Klemm
ASN        : AS200461 Ian David Klemm
Host       : Ian David Klemm
Location   : Rotterdam, South Holland (ZH)
Country    : The Netherlands

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/sda1):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 347.04 MB/s  (86.7k) | 4.55 GB/s    (71.2k)
Write      | 347.95 MB/s  (86.9k) | 4.58 GB/s    (71.5k)
Total      | 694.99 MB/s (173.7k) | 9.13 GB/s   (142.7k)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 7.76 GB/s    (15.1k) | 6.42 GB/s     (6.2k)
Write      | 8.18 GB/s    (15.9k) | 6.85 GB/s     (6.6k)
Total      | 15.94 GB/s   (31.1k) | 13.27 GB/s   (12.9k)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | 3.50 Gbits/sec  | busy            | 39.2 ms        
Eranium         | Amsterdam, NL (100G)      | 7.18 Gbits/sec  | 5.61 Gbits/sec  | 7.46 ms        
Uztelecom       | Tashkent, UZ (10G)        | 1.23 Gbits/sec  | 1.31 Gbits/sec  | 93.0 ms        
Leaseweb        | Singapore, SG (10G)       | 901 Mbits/sec   | 1.10 Gbits/sec  | 163 ms         
Clouvider       | Los Angeles, CA, US (10G) | 1.04 Gbits/sec  | 1.14 Gbits/sec  | 140 ms         
Leaseweb        | NYC, NY, US (10G)         | 1.00 Gbits/sec  | 1.99 Gbits/sec  | 83.6 ms        
Edgoo           | Sao Paulo, BR (1G)        | 863 Mbits/sec   | 872 Mbits/sec   | 191 ms         

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
-----           | -----                     | ----            | ----            | ----           
Clouvider       | London, UK (10G)          | busy            | 139 Mbits/sec   | 36.2 ms        
Eranium         | Amsterdam, NL (100G)      | 6.55 Gbits/sec  | 5.46 Gbits/sec  | 7.48 ms        
Uztelecom       | Tashkent, UZ (10G)        | 1.00 Gbits/sec  | 1.13 Gbits/sec  | 92.7 ms        
Leaseweb        | Singapore, SG (10G)       | 903 Mbits/sec   | 1.09 Gbits/sec  | 162 ms         
Clouvider       | Los Angeles, CA, US (10G) | 503 Mbits/sec   | 900 Mbits/sec   | 140 ms         
Leaseweb        | NYC, NY, US (10G)         | 1.18 Gbits/sec  | 2.20 Gbits/sec  | 83.5 ms        
Edgoo           | Sao Paulo, BR (1G)        | 763 Mbits/sec   | 19.2 Mbits/sec  | 190 ms         

Geekbench 6 Benchmark Test:
---------------------------------
Test            | Value                         
                |                               
Single Core     | 1576                          
Multi Core      | 7072                          
Full Test       | https://browser.geekbench.com/v6/cpu/7479008

YABS completed in 12 min 4 sec

    What's the bandwidth on these?

    P.S. annual code doesn't work - it takes off 2.79 TOTAL, not monthly.

    @v3ng codes arent working

    Thanked by 1v3ng
  • v3ngv3ng Member, Host Rep

    @Dylhost @gbzret4d

    whoops, thank you for notifying me!
    Just created a new code for annual payments: EPP3SPNP

    Thanked by 2ehab gbzret4d
  • ehabehab Member

    @v3ng said:

    nice to see you post.

    has been a long time.

    long time n o s e x

    Thanked by 2maverick v3ng
  • maverickmaverick Member

    I 100% agree with @ehab , where r u @v3ng ? We miss you...

    This long abscence might mean only one thing, you were so busy preparing some unbelievably good deals for us, don't dissapoint. :D

    Thanked by 3ehab v3ng gbzret4d
  • v3ngv3ng Member, Host Rep
    edited September 2024

    @ehab @maverick
    Glad to see you still remember us <3

    Yes, there’s a lot happening behind the scenes. Just recently, we deployed our new AMD EPYC Milan hosts. Also, all nodes now come with DDoS protection by default.

    New deals will most likely only be posted once the new Cloud Platform is finally live and fully in production.

    I keep spending too much time on perfecting the little details. But then again, we’re not really in a rush, so I want to provide an absolutely polished user experience.

    But if you’re in need of some specific deals or configurations right now, let me know and I’m sure we can make it work :)

    Thanked by 3maverick ehab sh97
  • sh97sh97 Member, Host Rep

    @v3ng said:
    @ehab @maverick
    Glad to see you still remember us <3

    Yes, there’s a lot happening behind the scenes. Just recently, we deployed our new AMD EPYC Milan hosts. Also, all nodes now come with DDoS protection by default.

    New deals will most likely only be posted once the new Cloud Platform is finally live and fully in production.

    I keep spending too much time on perfecting the little details. But then again, we’re not really in a rush, so I want to provide an absolutely polished user experience.

    But if you’re in need of some specific deals or configurations right now, let me know and I’m sure we can make it work :)

    Beta access when?!

Sign In or Register to comment.