★ VirMach ★ RYZEN ★ NVMe ★★ $8.88/YR- 384MB ★★ $21.85/YR- 2.5GB ★ Instant ★ Japan Pre-order ★ & More

VirMach · April 2022

@FrankZ said:

@VirMach said: but I just realized I haven't had my coffee today

=

@VirMach said: I have a headache,

Oh man.. it's even better.

The Keurig machine is down so I already ordered coffee... this morning... I was so busy I didn't even grab it.

VirMach · April 2022

Laughs in arrhythmia

qwerttaa · April 2022

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:
??????

again...when i "apt-get autoclean"

then...shutdown again...

im off to bed

good luck

It's the same issue I see with everyone else on Debian 10 + 384MB. It's crashing due to OOM.

before i reinstalled, i set up 2g swap

same result

Yeah, from my experience if it goes OOM on apt-get stuff the swap won't help, you need more RAM. That's just a guess though, I'm not very experienced with running stuff on low RAM as I have access to a lot of free high RAM virtual servers due to my line of work.

upgraded from debian10 to debian11 with apt, not shutdown

why?

Probably because it didn't run out of memory then, but it runs out of memory now. I assume upgrading from Debian 10 to 11 means a lot of apps got updated too, and now those use more memory, so when you're now using Debian 11 and also trying to run whatever you're trying to run on top of that finally made it too much.

root@AAA:~# apt update
Hit:1 https://deb.debian.org/debian bullseye InRelease
Get:2 https://deb.debian.org/debian bullseye-updates InRelease [39.4 kB]
Hit:3 https://security.debian.org/debian-security bullseye-security InRelease
Get:4 https://deb.debian.org/debian bullseye-backports InRelease [44.2 kB]
Hit:5 http://nginx.org/packages/debian bullseye InRelease
Get:6 https://deb.debian.org/debian bullseye-proposed-updates InRelease [44.6 kB]
Fetched 128 kB in 1s (195 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
root@AAA:~# apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt clean
root@AAA:~# top
top - 09:52:35 up 6:33, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 70 total, 2 running, 68 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 93.8 id, 0.3 wa, 0.0 hi, 2.9 si, 2.9 st
MiB Mem : 348.5 total, 49.9 free, 55.3 used, 243.4 buff/cache
MiB Swap: 256.0 total, 256.0 free, 0.0 used. 282.8 avail Mem

i also have several vps, even 256 ovz
same with debian11, no oom problems
i can't understand...

Let me get my coffee and I'll spin up Debian 10, upgrade it to 11, on the same node, using the same template, and see if I can reproduce that. If I do reproduce it I'll provide some feedback on what can maybe be done.

check your inbox
you can do anything with it
i mean anything without Illegal

VirMach · April 2022

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:
??????

again...when i "apt-get autoclean"

then...shutdown again...

im off to bed

good luck

It's the same issue I see with everyone else on Debian 10 + 384MB. It's crashing due to OOM.

before i reinstalled, i set up 2g swap

same result

Yeah, from my experience if it goes OOM on apt-get stuff the swap won't help, you need more RAM. That's just a guess though, I'm not very experienced with running stuff on low RAM as I have access to a lot of free high RAM virtual servers due to my line of work.

upgraded from debian10 to debian11 with apt, not shutdown

why?

Probably because it didn't run out of memory then, but it runs out of memory now. I assume upgrading from Debian 10 to 11 means a lot of apps got updated too, and now those use more memory, so when you're now using Debian 11 and also trying to run whatever you're trying to run on top of that finally made it too much.

root@AAA:~# apt update
Hit:1 https://deb.debian.org/debian bullseye InRelease
Get:2 https://deb.debian.org/debian bullseye-updates InRelease [39.4 kB]
Hit:3 https://security.debian.org/debian-security bullseye-security InRelease
Get:4 https://deb.debian.org/debian bullseye-backports InRelease [44.2 kB]
Hit:5 http://nginx.org/packages/debian bullseye InRelease
Get:6 https://deb.debian.org/debian bullseye-proposed-updates InRelease [44.6 kB]
Fetched 128 kB in 1s (195 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
root@AAA:~# apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt clean
root@AAA:~# top
top - 09:52:35 up 6:33, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 70 total, 2 running, 68 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 93.8 id, 0.3 wa, 0.0 hi, 2.9 si, 2.9 st
MiB Mem : 348.5 total, 49.9 free, 55.3 used, 243.4 buff/cache
MiB Swap: 256.0 total, 256.0 free, 0.0 used. 282.8 avail Mem

i also have several vps, even 256 ovz
same with debian11, no oom problems
i can't understand...

Let me get my coffee and I'll spin up Debian 10, upgrade it to 11, on the same node, using the same template, and see if I can reproduce that. If I do reproduce it I'll provide some feedback on what can maybe be done.

check your inbox
you can do anything with it
i mean anything without Illegal

Good thing you said that, I was thinking of doing something illegal since it's not my hardware or leased IPs or company.

I don't want to log into your service because I don't know what you did with it so far. It'd be faster to do it on a new template and tell you what exactly I did so you can repeat it. What are you trying to achieve again with it right now?

moehentai · April 2022

@VirMach said: Sorry, these were going to be included in the recreations but I forgot to process them. I'm going to bring these back online now since they didn't get included in the recreations. Yours was suspended before the email.

Ok , I have closed all my ticket yesterday.And waiting for your good news.Thx.:-)

VirMach · April 2022

@moehentai said:

@VirMach said: Sorry, these were going to be included in the recreations but I forgot to process them. I'm going to bring these back online now since they didn't get included in the recreations. Yours was suspended before the email.

Ok , I have closed all my ticket yesterday.And waiting for your good news.Thx.:-)

Re-open the ticket please, I'm using that for reference.

FrankZ · April 2022

@VirMach said: Laughs in arrhythmia

So you literally sell a VPS for a year for less then a cup of coffee.

EDIT: It took more then 643 pre-sale 384MB VPSes to pay for your yearly coffee overhead.

qwerttaa · April 2022

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:

@VirMach said:

@qwerttaa said:
??????

again...when i "apt-get autoclean"

then...shutdown again...

im off to bed

good luck

It's the same issue I see with everyone else on Debian 10 + 384MB. It's crashing due to OOM.

before i reinstalled, i set up 2g swap

same result

Yeah, from my experience if it goes OOM on apt-get stuff the swap won't help, you need more RAM. That's just a guess though, I'm not very experienced with running stuff on low RAM as I have access to a lot of free high RAM virtual servers due to my line of work.

upgraded from debian10 to debian11 with apt, not shutdown

why?

Probably because it didn't run out of memory then, but it runs out of memory now. I assume upgrading from Debian 10 to 11 means a lot of apps got updated too, and now those use more memory, so when you're now using Debian 11 and also trying to run whatever you're trying to run on top of that finally made it too much.

root@AAA:~# apt update
Hit:1 https://deb.debian.org/debian bullseye InRelease
Get:2 https://deb.debian.org/debian bullseye-updates InRelease [39.4 kB]
Hit:3 https://security.debian.org/debian-security bullseye-security InRelease
Get:4 https://deb.debian.org/debian bullseye-backports InRelease [44.2 kB]
Hit:5 http://nginx.org/packages/debian bullseye InRelease
Get:6 https://deb.debian.org/debian bullseye-proposed-updates InRelease [44.6 kB]
Fetched 128 kB in 1s (195 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
All packages are up to date.
root@AAA:~# apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt autoclean
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
root@AAA:~# apt clean
root@AAA:~# top
top - 09:52:35 up 6:33, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 70 total, 2 running, 68 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 93.8 id, 0.3 wa, 0.0 hi, 2.9 si, 2.9 st
MiB Mem : 348.5 total, 49.9 free, 55.3 used, 243.4 buff/cache
MiB Swap: 256.0 total, 256.0 free, 0.0 used. 282.8 avail Mem

i also have several vps, even 256 ovz
same with debian11, no oom problems
i can't understand...

Let me get my coffee and I'll spin up Debian 10, upgrade it to 11, on the same node, using the same template, and see if I can reproduce that. If I do reproduce it I'll provide some feedback on what can maybe be done.

check your inbox
you can do anything with it
i mean anything without Illegal

Good thing you said that, I was thinking of doing something illegal since it's not my hardware or leased IPs or company.

I don't want to log into your service because I don't know what you did with it so far. It'd be faster to do it on a new template and tell you what exactly I did so you can repeat it. What are you trying to achieve again with it right now?

base on debian10 from panel
1-change to cloud kernel
2-upgrade debian11
3-set iptables
4-enable bbr+fq
5-xray and nginx
6-upgrade everything with backports
7-autoremove and autoclean
8-reboot
all done

about setp5, use this one

wget -N --no-check-certificate -q -O install.sh "https://raw.githubusercontent.com/wulabing/Xray_onekey/nginx_forward/install.sh" && chmod +x install.sh && bash install.sh

VirMach · April 2022

@FrankZ said:

@VirMach said: Laughs in arrhythmia

So you literally sell a VPS for a year for less then a cup of coffee.

EDIT: It took more then 643 pre-sale 384MB VPSes to pay for your coffee overhead.

It's the big day, almost summer, I'm cashing in all my profits from this 8 year ponzi scheme for a cup of coffee and it was all worth it.

Or maybe I'm getting this 14 espresso shot drink and running a coffee sale on the side, one shot for $3.

qwerttaa · April 2022

@FrankZ said:

@VirMach said: Laughs in arrhythmia

So you literally sell a VPS for a year for less then a cup of coffee.

EDIT: It took more then 643 pre-sale 384MB VPSes to pay for your yearly coffee overhead.

don't worry about any of the traders, everyone knows how to make money

just like you and me

wimoson · April 2022

@foitin said:

@wimoson said:

ping.pe may help you
The IP could not be connected. The first time I tested it with ping.pe, not the machine in China.

and I took the liberty of ping-ing on ping.pe
45.66.128.1 is totally fine. so I assume any IP in 45.66.128.0/24 is not blocked either.
It's highly likely your VPS did not boot up correctly or ICMP is blocked as I just said.
Do your due diligence instead of spamming ticket/comments and only then can people/boss actually help you.

45.66.128.1 What is this? Is this my IP? I am so amused by your reply! hhhh

wimoson · April 2022

@foitin said:

@wimoson said:

I only issued a ticket after I checked the problem.

Chinese is for you.

After purchasing the VIR, I have not sent a ticket to urge it.

I just feel incomprehensible for your ignorance. The IP could not be connected. The first time I tested it with ping.pe, not the machine in China.

VIR bosses are skipping this question and waiting to be dealt with.

You opened a ticket for your own ignorance. What makes you think your emperor/boss? has the time to solve your own problem.
Did you boot up your VPS successfully. Do you know what's ICMP?
If you don't have any idea why would you assume others do?

and what's Chinese for me?

The more I look through your PMS the more I'm thinking of a HostHatch PMSing thread that spans two years and then I opened your profile. Yep. It's it you, JJJJ.

don't blame me for being impolite to you!

I didn't find you offensive. I just find you annoying.

I'm on 35 nodes and most of the VPS didn't activate properly for the first two days! I don't understand why you pretend you don't understand, and are nosy! Do not realize that you are wrong!

FrankZ · April 2022

VirMach · April 2022

@qwerttaa I fixed Debian 11 template, give it a try.

qwerttaa · April 2022

@VirMach said:
@qwerttaa I fixed Debian 11 template, give it a try.

nice
let me try to do some test

Chenery · April 2022

@VirMach My VPS is in node 40. It has been Suspended for more than 30 hours. When will it return to normal?
Invoice #1396864

qwerttaa · April 2022

@qwerttaa said:

@VirMach said:
@qwerttaa I fixed Debian 11 template, give it a try.

nice
let me try to do some test

just a note

pure debian 11 from official sources

not template yet

top - 23:22:02 up 8 min, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 65 total, 1 running, 64 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 96.1 id, 0.0 wa, 0.0 hi, 1.3 si, 2.6 st
MiB Mem : 347.1 total, 234.8 free, 45.7 used, 66.6 buff/cache
MiB Swap: 473.0 total, 473.0 free, 0.0 used. 289.5 avail Mem

VirMach · April 2022

Any other template requests speak now > @Chenery said:

@VirMach My VPS is in node 40. It has been Suspended for more than 30 hours. When will it return to normal?
Invoice #1396864

Make sure you have a ticket, priority department.

Chenery · April 2022

@VirMach said:
Any other template requests speak now > @Chenery said:

@VirMach My VPS is in node 40. It has been Suspended for more than 30 hours. When will it return to normal?
Invoice #1396864

Make sure you have a ticket, priority department.

I made a Ticket #213510 as you said, but now the vps has not been restored.

@VirMach said:
I'm beginning to suspend people booting into kernel panic on TYOC040. Suspension reason will be: "OS is causing overloading. Contact Priority Support."

Just make a ticket if you're one of these people, in the priority department, and I'll try to get it sorted with you ASAP.

passwa · April 2022

@VirMach Can you solve the problem of not sending panel accounts when creating vps, thank you! It seems a bit redundant to have to log in from the account every time! ---- Translated from Google

xpreboun · April 2022

@VirMach said:
Any other template requests speak now

Ubuntu 20.04 LTS Server? Or Server minimal?

Edit: I'm perfectly fine with mounting netboot.xyz ISO then install Ubuntu 18.04 LTS, then upgrade... But that took too much time and I also don't like any desktop/GUI flavors.

tototo · April 2022

@passwa said:
@VirMach Can you solve the problem of not sending panel accounts when creating vps, thank you! It seems a bit redundant to have to log in from the account every time! ---- Translated from Google

Did you receive an email titled "Your cloud service is almost ready (VPS IP)"?

xpreboun · April 2022

@tototo said:

Did you receive an email titled "Your cloud service is almost ready (VPS IP)"?

I think some users on Hostloc reported they did not receive any emails for JP activation...

Also isn't it horrible that every manual activation created one SolusVM account even for users that already have an SolusVM account before?

passwa · April 2022

@tototo said:

@passwa said:
@VirMach Can you solve the problem of not sending panel accounts when creating vps, thank you! It seems a bit redundant to have to log in from the account every time! ---- Translated from Google

Did you receive an email titled "Your cloud service is almost ready (VPS IP)"?

No, nothing, but booted. . . .

leendon · April 2022

I felt a little uncomfortable at first, paying more than 100 US dollars, two servers, none of which could be used, the whole process was so difficult, I admit that I was greedy for cheap,

VirMach · April 2022

@qwerttaa said:

@qwerttaa said:

@VirMach said:
@qwerttaa I fixed Debian 11 template, give it a try.

nice
let me try to do some test

just a note

pure debian 11 from official sources

not template yet

top - 23:22:02 up 8 min, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 65 total, 1 running, 64 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 96.1 id, 0.0 wa, 0.0 hi, 1.3 si, 2.6 st
MiB Mem : 347.1 total, 234.8 free, 45.7 used, 66.6 buff/cache
MiB Swap: 473.0 total, 473.0 free, 0.0 used. 289.5 avail Mem

What you're stating is similar to a dilemma people had with our services service a lot, to the point where I tried to push everyone to 1.5GB to 2GB plans.

Can Windows run on 768MB or 1GB RAM? Sure.

Can Windows run on 768MB or 1GB RAM and open a Chrome tab? Maybe.

The way you described it you're running other things.

@Chenery said:

@VirMach said:
Any other template requests speak now > @Chenery said:

@VirMach My VPS is in node 40. It has been Suspended for more than 30 hours. When will it return to normal?
Invoice #1396864

Make sure you have a ticket, priority department.

I made a Ticket #213510 as you said, but now the vps has not been restored.

@VirMach said:
I'm beginning to suspend people booting into kernel panic on TYOC040. Suspension reason will be: "OS is causing overloading. Contact Priority Support."

Just make a ticket if you're one of these people, in the priority department, and I'll try to get it sorted with you ASAP.

"Make sure you have a ticket, priority department."

Didn't see it since it wasn't. Checking now.

VirMach · April 2022

@passwa said:
@VirMach Can you solve the problem of not sending panel accounts when creating vps, thank you! It seems a bit redundant to have to log in from the account every time! ---- Translated from Google

@xpreboun said:

@tototo said:

Did you receive an email titled "Your cloud service is almost ready (VPS IP)"?

I think some users on Hostloc reported they did not receive any emails for JP activation...

Also isn't it horrible that every manual activation created one SolusVM account even for users that already have an SolusVM account before?

For the SolusVM accounts:

You can select to merge into the same one for non-specials. We do not do this because a lot of people want to transfer services, etc, so it makes it easier to process those for specials. Same with by default for other plans, it's easier for our resellers, plus we have a more advanced module than most other hosts that use just the default SolusVM one for WHMCS so you can do most controls there.
We don't usually give out account names and allow password resets for specials but I think for this one we may have? I'm not sure. The reasoning for this is that people will keep their emails different from SolusVM / WHMCS and get confused, or reset it to a very basic password and get hacked, or sell off their SolusVM account to others while they still have the billing account and so on.

It just creates more work and people being upset in the end if we do not do it that way but I guess people are still annoyed/upset one way or another.

lolmi · April 2022

TYOC039 shut down 3 times (768M) for no reason yesterday, but it has not appeared today, please continue to pay attention.

Chenery · April 2022

@VirMach said:

@qwerttaa said:

@qwerttaa said:

@VirMach said:
@qwerttaa I fixed Debian 11 template, give it a try.

nice
let me try to do some test

just a note

pure debian 11 from official sources

not template yet

top - 23:22:02 up 8 min, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 65 total, 1 running, 64 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 96.1 id, 0.0 wa, 0.0 hi, 1.3 si, 2.6 st
MiB Mem : 347.1 total, 234.8 free, 45.7 used, 66.6 buff/cache
MiB Swap: 473.0 total, 473.0 free, 0.0 used. 289.5 avail Mem

What you're stating is similar to a dilemma people had with our services service a lot, to the point where I tried to push everyone to 1.5GB to 2GB plans.

Can Windows run on 768MB or 1GB RAM? Sure.

Can Windows run on 768MB or 1GB RAM and open a Chrome tab? Maybe.

The way you described it you're running other things.

@Chenery said:

@VirMach said:
Any other template requests speak now > @Chenery said:

@VirMach My VPS is in node 40. It has been Suspended for more than 30 hours. When will it return to normal?
Invoice #1396864

Make sure you have a ticket, priority department.

I made a Ticket #213510 as you said, but now the vps has not been restored.

@VirMach said:
I'm beginning to suspend people booting into kernel panic on TYOC040. Suspension reason will be: "OS is causing overloading. Contact Priority Support."

Just make a ticket if you're one of these people, in the priority department, and I'll try to get it sorted with you ASAP.

"Make sure you have a ticket, priority department."

Didn't see it since it wasn't. Checking now.

The correct ticket is this Ticket #462737

qwerttaa · April 2022

@VirMach said:

@qwerttaa said:

@qwerttaa said:

@VirMach said:
@qwerttaa I fixed Debian 11 template, give it a try.

nice
let me try to do some test

just a note

pure debian 11 from official sources

not template yet

top - 23:22:02 up 8 min, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 65 total, 1 running, 64 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 96.1 id, 0.0 wa, 0.0 hi, 1.3 si, 2.6 st
MiB Mem : 347.1 total, 234.8 free, 45.7 used, 66.6 buff/cache
MiB Swap: 473.0 total, 473.0 free, 0.0 used. 289.5 avail Mem

What you're stating is similar to a dilemma people had with our services service a lot, to the point where I tried to push everyone to 1.5GB to 2GB plans.

Can Windows run on 768MB or 1GB RAM? Sure.

Can Windows run on 768MB or 1GB RAM and open a Chrome tab? Maybe.

The way you described it you're running other things.

Meeting Minimum Hardware Requirements
https://www.debian.org/releases/stable/amd64/ch03s04.en.html

@lolmi said:
TYOC039 shut down 3 times (768M) for no reason yesterday, but it has not appeared today, please continue to pay attention.

ouch.....
still oom too?
let's find out the real reason together

Howdy, Stranger!

Categories

In this Discussion

★ VirMach ★ RYZEN ★ NVMe ★★ $8.88/YR- 384MB ★★ $21.85/YR- 2.5GB ★ Instant ★ Japan Pre-order ★ & More

Comments

Howdy, Stranger!

Quick Links

Categories

In this Discussion

★ VirMach ★ RYZEN ★ NVMe ★★ $8.88/YR- 384MB ★★ $21.85/YR- 2.5GB ★ Instant ★ Japan Pre-order ★ & More

Comments