New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
It’s higher than the one posted the other day which was 28 for single core (https://www.lowendtalk.com/discussion/comment/3176076/#Comment_3176076)
Honestly @keijo just ask for a refund and move on. That benchmark is incredibly poor and your not the only one with poor results.
Somebody posted GB5 score as low as 28, with the same provider as above.
I noticed that, I didn't read the previous pages.
I managed to Snag a Beta Invite for Starlink so I ran the benchmark script for the network test:
Here from 1Gservers.com, with 2 HDD on RAID1
How about the disk test?
curl -s https://raw.githubusercontent.com/masonr/yet-another-bench-script/master/yabs.sh | bash
## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## # # Yet-Another-Bench-Script
# v2020-12-29 #
https://github.com/masonr/yet-another-bench-script # # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## # Sat 13 Mar 2021 06:24:48 PM +07 Basic System Information:
--------------------------------- Processor : Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz CPU cores : 8 @ 1600.286 MHz AES-NI : ❌ Disabled
VM-x/AMD-V : ✔ Enabled
RAM : 7.8 GiB
Swap : 7.6 GiB
Disk : 923.3 GiB fio Disk Speed Tests (Mixed R/W 50/50):
--------------------------------- Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | 725.00 KB/s (181) | 10.81 MB/s (168) Write | 758.00 KB/s (189) | 11.32 MB/s (176) Total | 1.48 MB/s (370) | 22.13 MB/s (344) | |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | 33.67 MB/s (65) | 38.40 MB/s (37) Write | 35.78 MB/s (69) | 41.72 MB/s (40) Total | 69.45 MB/s (134) | 80.12 MB/s (77) iperf3 Network Speed Tests (IPv4):
--------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | |
Clouvider | London, UK (10G) | 856 Mbits/sec | 161 Mbits/sec Online.net | Paris, FR (10G) | 853 Mbits/sec | 198 Mbits/sec WorldStream | The Netherlands (10G) | 833 Mbits/sec | 434 Mbits/sec Biznet | Jakarta, Indonesia (1G) | 719 Mbits/sec | 102 Mbits/sec Clouvider | NYC, NY, US (10G) | 908 Mbits/sec | 433 Mbits/sec Velocity Online | Tallahassee, FL, US (10G) | 913 Mbits/sec | 742 Mbits/sec Clouvider | Los Angeles, CA, US (10G) | 939 Mbits/sec | 940 Mbits/sec Iveloz Telecom | Sao Paulo, BR (2G) | 822 Mbits/sec | 183 Mbits/sec iperf3 Network Speed Tests (IPv6):
--------------------------------- Provider | Location (Link) | Send Speed | Recv Speed | | |
Clouvider | London, UK (10G) | 849 Mbits/sec | 448 Mbits/sec Online.net | Paris, FR (10G) | 845 Mbits/sec | 361 Mbits/sec WorldStream | The Netherlands (10G) | 834 Mbits/sec | 460 Mbits/sec Clouvider | NYC, NY, US (10G) | 899 Mbits/sec | 731 Mbits/sec Clouvider | Los Angeles, CA, US (10G) | 926 Mbits/sec | 653 Mbits/sec Geekbench 5 Benchmark Test:
--------------------------------- Test | Value
|
Single Core | 848
Multi Core | 3323
Full Test | https://browser.geekbench.com/v5/cpu/6929124
Nexusbytes KVM nvme vps here , I am happy with them @seriesn (I am the customer with email seo**** and name Meh***
Aye! Thanks Fam!
@naranjatech Beast of a machine (easily my largest VPS) and a bargain €48/yr for 8GB/160GB/4vCPU/2IP
Would be useful if virtualisation was enabled.
To somewhat balance the previous test, here's two @VirMach budget VPS'. My tiny £3.75/yr Dallas one and a $12.47/yr Dutch cheapo. The network speed at Dallas made be fall off my couch! The Dutch one could do with AES-NI being enabled.
My couple of custom ISO nearly fills the limited disc space and GB5 is memory constrained presumably.
Azure B1S with "Premium SSD" - P6 64GB
Hostsolutions 1TB Storage VPS
Whereabouts are you located and has it gotten better throughout the beta?
I am located in NW Michigan. I've been seeing results of an average of 300+ down and 70+ up recently when testing.
Its been getting alot better, I only use it as a backup connection since I already have a Gig connection. But they are raising download goal from 1Gbps to 10Gbps: https://www.pcmag.com/news/spacexs-starlink-raises-download-speed-goal-from-1gbps-to-10gbps
Our 5950x 4gb ram vps in New York Thing is a beast
`Basic System Information:
Processor : AMD Ryzen 9 5950X 16-Core Processor
CPU cores : 4 @ 3400.000 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 3.6 GiB
Swap : 1023.0 MiB
Disk : 38.3 GiB
fio Disk Speed Tests (Mixed R/W 50/50):
`
@MasonR It would be nice if u add os distro that used in basic system information
and virtualization type
Sorry for bumping an old thread but I've been wanting to suggest @MasonR to add
uptimeresults under "Basic System Information".I know it's not that big of a deal if it's there or not but I figured that such information would be nice to have, and show, especially if you've got something that's been up for years.
What do you think?
And Operating System if possibble
These are good ideas.
To post the finished output to clbin.com like how bench.monster does.
while you are at it. make it work on shared hosting.
I managed to get both feature working, it is not that hard to embed the said information onto the script.
Yabs
However I suggest you to raise an issue on yabs github page, I think you'll get faster response
As the last one is two years old:
Euserv VS2-free:
`
root@srv27225:~/clatd# curl -sL yabs.sh | bash
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2022-05-06 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
IPV4 connectability added via wireguard and cloudflare.