New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
You may use:
https://github.com/Nyr/openvpn-install
Credits and Kudos go to @Nyr
Screw the videos.
Thank @Nyr for these.
OpenVPN: https://github.com/Nyr/openvpn-install
Wireguard: https://github.com/Nyr/wireguard-install
Or
https://github.com/Nyr/wireguard-install
For wireguard
Behold the bold Nyr, control the globe slowly,
Proceeds to blow, swinging swords like Shinobi.
Stomp grounds and pound footprints in solid rock,
Nyr got it locked, performing live on your hottest block.
Debian 11 KVM
sudo apt install wireguard
Edit config file:
vi wg0.conf
, then enter the following:Here
uplink
is the network interface name that goes to the Internet.It's probably
eth0
orens3
on your server.You can see it with
ip addr
command.Start VPN server:
sudo wg-quick up ./wg0.conf
Enter the following config:
QIU2SXaa5LR5+/ssf4OC7TyELKhYmxQBpZ2iPG/zW3I=
tuk1I/TppNWYhT928bzu9Le9lrm3vvKAnwJBPShc0hc=
:51820
0.0.0.0/0
Click the toggle on VPN client app
If you need more than one client:
wg genkey | tee /dev/stderr | wg pubkey
to generate another key.[Peer]
section in thewg0.conf
file, change IP address, and paste the second line.OpenVPN: https://github.com/Nyr/openvpn-install
Wireguard: https://github.com/Nyr/wireguard-install
Can't believe nobody mentioned these yet
@yoursunny, this is what I was looking for a one page set up, and how to make extra keys.
ty
do you know where I find the public key from the vps provider? what is it called, because I cant find it
VPS provider doesn't give you keys.
You can make keys with
wg genkey | tee /dev/stderr | wg pubkey
command, or just copy paste the keys above.Do you just dl the zip?
Right, now that makes sense, because we had lessons on ocean and linode and I'm not going through those companies.
Thanks, that part was confusing
If you want to use Wireguard, open a new terminal and paste this:
wget https://git.io/wireguard -O wireguard-install.sh && bash wireguard-install.sh
If you want OpenVPN instead, open a new terminal and paste this:
wget https://git.io/vpn -O openvpn-install.sh && bash openvpn-install.sh
No need to download any zip, etc.
Thanks for the offer, lol but I will be making my own keys..
I find this slightly neater:
cd /etc/wireguard; wg genkey | tee privatekey | wg pubkey > publickey
Then you always have a handy reference stored in the pubkey and privatekey files.
I want to change iso but need the vpn via vps. which one is preferred? keep looking at openvpn
You do know what you are talking about! We got shown that too, but the long way of creating a file to put the keys into. Thanks
I always find creating a VPN easy with those scripts, but what do you guys do to get the pickier streaming services running? I always end up deleting my VPS because streaming sites still block me.
I think a lot of services, like streaming platforms, block most datacenter IPs.
Bloody hell after so many comments why nobody mentioned this great script..
Thank you @Nyr
Can somebody explain why no one mentions Outline VPN?
Hey thanks, I'd forgotten I wanted to try that.
tinc?
So Outline works beautifully for me. Getting 35Mbps from the Vultr Seoul server which is plenty good for 1080p. Unfortunately, their IP range seems to be considered foreign by all my favorite streaming services lol. Will try Amazon Lightsail tomorrow.
What I like about it is that there's a bit of handholding with the keys, which I usually have a hard time with. Keys are easy to generate and send. The dashboard also gives you a traffic usage summary which is nice.
There were some hiccups installing on Ubuntu 21.10, but with easy fixes:
The ports above are mine. You'll get randomly assigned ports right after Outline's setup script finishes running, something like this:
Anyways, this is all good fun. I'll be pissed if it turns out that all the cheaper VPS providers in Korea are blocked, though.
Thanks for all the love, guys
Wu Tang is for the children
Just follow this guide https://meoncloud.com/how-to/install-your-very-own-vpn-in-10-min/
Yeah and Sean Kingston is for the grown-ups.
Wireguard with Nyr's script. Outline.
I use this:
https://github.com/angristan/wireguard-install
Thank you to everyone