New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Ryzen Build
I purchased the;
https://www.newegg.com/amd-ryzen-5-5600x/p/N82E16819113666?Item=N82E16819113666
and
https://www.amazon.com/gp/product/B07WZWNXGQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
I implemented the ram, CPU and HDD the board is turning on powering just fine but not getting a connection from the VGA.
Does anyone have experience with this mobo? high doubt its defective it was new from NewEgg.
Comments
@TGT if I am not wrong Ryzen’s do not have built in GPU. You would need video card.
What he said. Or you can connect via the built in IPMI and use the KVM.
Update BIOS from IPMI if you haven't.
Or just PMS hard enough to hallucinate.
this BMC could take up to 90 sec to initialize
clear CMOS could help as well
this motherboard requires BIOS version P4.20 tu support this CPU, while your motherboard could have factory loaded older version i.e. P3.50 (version could be printed on the sticker on board and package)
if so, you have to flash BIOS update through web access IPMI
Thanks that worked. Might be taking you up on that colocation offer now. This is actually one of the servers I was building for colo.
I had a couple B450 boards that needed upgrades for latest. The annoying thing is that the sticker had a later version than loaded! Needed to run bios update twice to get latest version. Not sure if buggy or some dual bios failover thing happening.