New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Looking for a budget oriented .HK VPS (KVM highly prefered).
Greetings,
I am in need of a budget oriented VPS server with with the following specs:
- Must be based in Hong-Kong.
- 1 vCore.
- 1GB of RAM (512MB is not acceptable).
- Highly prefered KVM over OpenVZ.
- TAP/TUN enabled (if OpenVZ).
- FUSE kernel module must be available (if OpenVZ).
- Preferably at least 30GB of SSD space (20GB is bare minimum, HDD over SSD is tolerable as last resort...).
- Unmetered (or at least 1TB/month of international trafic).
- Decent routes to Singapore (equal or less than 35ms ideally).
Thank you.
Comments
What is your budget?
It all depends on the VPS whether it is KVM vs. OpenVZ and/or uses a SSD vs. HDD.
Of course.
Any numbers?
I'm currently suscribed to an OpenVZ VPS with the following specs: 1GB of RAM, 500GB of traffic, 15GB SSD for 5.99$/month and I'm highly unsatisfied because:
I have been with them for almost a year as it was a yearly payment through PayPal, it is time to "go".
Any KVM with identical and/or better specs within the same price range or cheaper would be a win-win situation to me.
Feel free to tell me if my expectations are unrealistic at that price tag.
Thanks.
Good luck with your budget.
Feel free to tell me what should I expect to pay for a similar specced KVM VPS in Hong Kong?
Thanks.
$5.
Would you be kind enough to recommend a provider?
Thanks.
I have no personal experience regarding asian providers or VPS in Asia.
Thanks for your input.
You're welcome.
LOL! Trolling gone bad.
Anyone knows what to expect with a monthly budget of 7$-10$?
Thanks.
So far the cheapest one would be Aliyun (AlibabaCloud) but I am not sure how it is charged for international clients. The price is only $3.49/m that fulfil all your requirements.
I will look into it right away.
Thanks.
I only managed to get the Chinese version but you can try out using the link below.
The spec is as follow:
1 vCPU / 1G RAM / 25G SSD (RAID 10) / 1T Bandwidth @ 30Mbps / 1 IPv4
This should be the link: https://common-buy-intl.aliyun.com/?commodityCode=swas®ionId=cn-hongkong#/buy
It seems we’re looking at an 9$/month offer with no mention of customizable reverse DNS whatsoever or the technology used, either KVM or OpenVZ.
Either way I’ll keep looking in the $5-$7 price range, I have no use for 30Mbps or 30G SSD at this point, 20G should be fine with a hardcap at 10Mbps is plenty enough for my needs.
Thanks.
My mistake, it is a promotion only for Chinese customers. It is priced at 24 RMB ($3.49 USD) and limited to 5 VPS per customer. That explain the pricing differences.
Fyi, it is KVM and RDNS should be supported. It is a similar product to Amazon Lightsail.
try hosthongkong.net, they are here at LET but I forgot what their username is.
edit: @randvegeta
Thanks for your help regardless.
Sadly it seems all the good "promotional" deals are either sold out/out of stock:
https://www.hosthongkong.net/billing/cart.php?gid=10
A HK-KVM-LET-SPECIAL-1G would have been perfect. Could even prepay a couple of years in advance at that rate, given they accept PayPal as payment method, oh well...
I believe @randvegeta can make a deal for you. He's a good guy
Cool, it’s 21:21 to 23:21 in Asia depending on the timezone also we’re on a Saturday night which adds up, I think I l’ll get in touch with @randvegeta soon’ish.
Thanks again!
Im in Lithuania now. I work weekends too. What about your China traffic? Do you need any? We mainly to Xen but can do KVM also.
What exactly are you looking for?
Look no further: https://www.ransomit.com.au/hong-kong-china-vps/
Firstly it's too expense, secondly, single-homed Telstra is not everyone's cup of tea, not to mention it is currently routed from Europe to HK through Australia for me (no wonder, Telstra's homeland).
Well it's pretty hard to describe but here goes; I need a "KVM tool box" to replace the current one which is failing hard.
Specs should be;
The "KVM tool box" will be used as secondary DNS, MX for personal domain names (less than 100 mails a day), run some kind of LG for some projects, a bit of traffic towards the rest of South-East Asia (babeld, tinc, openvpn, stunnel).
And I need it cheaply as possible, really.
Thanks!
Still no reason to require 1GB ram and not 512MB. All that you listed if set up right (e.g. nginx, not Apache) would fit under 200 or 300 MB used.
Hello.
@randvegeta Should I PM you or something?
Thanks.
Sure. Or skype me (same screen name)