New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Dedibox 08161 Using Raid 0
Thank you... Do Dedibox Limited 08163 comes with KVM to install my own ISO?
Install using KVM over IP, almost all OS can installed on dedibox
Even better, Online hosts Windows ISOs on a NAS that you can install with the KVM:
Dell servers: https://documentation.online.net/en/serveur-dedie/systemes-d_exploitation/installation_from_the_kvm_dell_idrac
HP servers: https://documentation.online.net/en/serveur-dedie/systemes-d_exploitation/installation_from_the_kvm_hp_ilo
08161 out of stock
got two of these disk:
nearly 3 years old, but fine so far:
for those who wonder how to achieve the smart-data through the perc h200, just use
which will deliver the data depending on the ports used put choose number 0 to 3, mine were on sg0 and sg2
Je suis en retard
well i had to get the 08163 before they go out of stock too. it will probably sit idle
Brought one but Availability is still showing 42
Why my dedibox 08161 raid 0 just got 120mb/s on freevps.us bench?
Encore beaucoup de disponibilité mais plus de 08161.
̶t̶̶h̶̶e̶̶y̶̶ ̶̶s̶̶c̶̶a̶̶m̶̶m̶̶e̶̶d̶̶ ̶̶y̶̶o̶̶u̶̶,̶̶ ̶̶y̶̶o̶̶u̶̶ ̶̶s̶̶h̶̶o̶̶u̶̶l̶̶d̶̶ ̶̶o̶̶p̶̶e̶̶n̶̶ ̶̶a̶̶ ̶̶d̶̶i̶̶s̶̶p̶̶u̶̶t̶̶e̶̶ ̶̶a̶̶s̶̶a̶̶p̶̶!̶
Man, seriously?! It's showing the speed in MB/s, not mb/s
=== START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST32000444SS Revision: KS68 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Rotation Rate: 7200 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c500260b3687 Serial number: 9WM3N1MY Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Thu Feb 25 18:27:55 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 39 C Drive Trip Temperature: 68 C Manufactured in week 04 of year 2011 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 15 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 15 Elements in grown defect list: 994 Vendor (Seagate) cache information Blocks sent to initiator = 2187481423 Blocks received from initiator = 875526968 Blocks read from cache and sent to initiator = 93723159 Number of read and write commands whose size <= segment size = 162934441 Number of read and write commands whose size > segment size = 4675071 Vendor (Seagate/Hitachi) factory information number of hours powered up = 41307.32 number of minutes until next internal SMART test = 23 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 1413886831 504 0 1413887335 1413887336 6675.018 1 write: 0 0 0 0 0 16172.904 0 verify: 1302928974 553 0 1302929527 1302929528 51606.701 0 Non-medium error count: 4 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 41114 - [- - -] # 2 Background long Completed 16 6 - [- - -] # 3 Background short Completed 16 1 - [- - -] Long (extended) Self Test duration: 18500 seconds [308.3 minutes]Mine,
Almost 5 years
You guys that did RAID 0 on the Dedibox 08161 - how did you do it?
I've clicked "Raid Configuration" on the bottom left tab and then selected "Raid 0" > "Save Changes" > "Erase All My Data And Proceed To Raid Level Changes" - YET every time I try and install CentOS it says RAID1...
Dedibox Limited 08162
SAS DISKS
DELL brand i confirm
Can confirm that. Why?
I will discover soon once my OS install complete
@ZweiTiger
They ARE SAS - drives.
At least both disks in my box are SAS from Seagate.
(Google ST3200044SS)
Hm great. i will check. Also this is DELL brand.
Thanks... just got the 08162 which is going to replace my aging 1215.
same here
My idrac reports Dell R410 . (08162 E5620)
Still haven't got a public responding IP from their auto-installer.
I think the separate /home partition borked their script. So trying again.
@vimalware
Even once the script says it finished and servers says 'online', it will take couple minutes before SSH works. Had to wait around 15minutes...
I went grocery shopping for an hour.
Poked around the idrac after I returned.
Does anyone have any experience with the different online.net datacenters?
My previous server is @ DC3; the newly ordered one @ DC2.
1073741824 bytes (1.1 GB) copied, 12.5025 s, 85.9 MB/s
Terrible IO with these seagate drives, DMA does not seem to be supported either for some reason.
If it wasn't, you'd have 10 MB/sec speeds with 100% CPU load. So it's most likely just an indication error of wherever you're checking this.
http://www.iliad-datacenter.fr/datacenters
So. Just for everyone as info.
Online.net will release the 2016 series, starting next week. It will also feature new 'low end' boxes below 10€ and such, so keep your money tight and keep an eye out. Stock is highly limited during starting phase.
Yes... not so fast drives. Slow hell