Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Do You Have A Home Server?

1234568»

Comments

  • TheHackBoxTheHackBox Member
    edited August 2012

    HDD: Some 30 or 40GB LAPTOP HDD (IDE) & 1TB USB 2.0/3.0 Western Digital
    ISP: Charter 40mbps/4Mbps
    RAM: 768MB
    Processor: Intel Pentium 4-M @ 2.40Ghz
    OS: Debian 6 32bit
    Uptime: Offline atm (need to set it up on the new router)
    Location: Private
    Power Usage: ~20W

  • AlexBarakovAlexBarakov Patron Provider, Veteran

    @TheHackBox said: Power Usage: ~20W

    No way :P

  • Laptops don't use much power. My MBP with 2 hard drives and the screen at full brightness draws around 27 watts.

  • AlexBarakovAlexBarakov Patron Provider, Veteran

    @dmmcintyre3 said: Laptops don't use much power. My MBP with 2 hard drives and the screen at full brightness draws around 27 watts.

    Well, it just seems weird to me - old P4's are power hungry. Old IDE HDD as well. But I could be wrong as well.

    My i5 in my laptop uses more than that.

  • TheHackBoxTheHackBox Member
    edited August 2012

    @Alex_LiquidHost said: Power Usage: ~20W

    Yes way. The screen doesn't work so the laptop is closed and just idles.

  • earlearl Member

    @Alex_LiquidHost

    It's a P4-M M=mobile so it would use less power.. they were design specially for laptops so they would run cooler and longer with the lower watts..

  • @Jeffrey 0.5 Amps Idle.

  • KuJoeKuJoe Member, Host Rep

    I'm moving all of my home servers into our cabinet, been having a lot of latency issues at home. :(

  • NikkiNikki Member
    edited August 2012

    Just upgraded :)

    ISP: AT&T U-verse 12Mbit
    Processor: Atom D2700 (2 core, 4 thread)
    RAM: 4GB
    Drives:
    OS - 500GB Seagate Hybrid
    Storage - 2TB Seagate Barracuda
    External - 1TB Seagate Freeagent Desk
    Operating System: Debian 6.0.5

    Router: Linksys E3000 Gigabit

    Runs pretty cool and at pretty low power :D

  • My new home server now consists of:

    Amd APU 1.7Ghz Dual-Core
    500GB SATA HDD
    2GB DDR3 Ram
    CrunchBang Linux - Debian 7 based with OpenBox pre-configured.

  • DennisdeWitDennisdeWit Member
    edited July 2013

    I do

    CPU: Intel Core i5 3350P - 3.1 GHz - 4 cores - LGA1155 Socket - doos
    RAM: Corsair XMS3 - Geheugen - 8 GB : 2 x 4 GB, 1X8GB- DIMM 240-pins - DDR3 - 1333 MHz / PC3-10600 - CL9 - 1.5 V - NON-ECC
    Motherboard: ASRock Z77 Pro3 - Moederbord - ATX - LGA1155 Socket - Z77 -
    OS: ESXi 5.1
    HDD: 1TB SATA
    Location: Groningen, The Netherlands (attic)

    Uptime: 95 days at this moment.

    On the server: 7 Windows VPS, 1 Linux. 2 of the Windows VPS are for streaming purposes. It's just pushing the data away to my server at MisterHost, Germany. I live away 20km from Germany boundry, so there are no problems. And a low ping ;)

  • I built a mini-itx system in a cube as a sandbox/playground/homeserver as it has 2 x 1 Gbit NICS + 1 WLAN, so I can connect it to 3 different networks.
    It's quite silent.

    Cost was around 750 euros to build this.

    Case: Cooler Master Elite 120 Advanced, Mini-ITX
    Motherboard: Gigabyte GA-Z77N-WIFI Intel Z77 LGA1155
    CPU: Intel Core i5 3450 3.1 GHz LGA1155
    Memory: Kingston HyperX Blu 16 GB (2 x 8 GB) DDR3 1600
    Power Supply: Corsair CX430W V2 CX 430 W ATX-PSU
    HDDs: 2 x Seagate Barracuda 1 TB 64 MB 7200 RPM 3.5" SATA

    Running Ubuntu 13.04 server.

    $ free -m
    total used free shared buffers cached
    Mem: 15937 15187 749 0 122 14228
    -/+ buffers/cache: 836 15101
    Swap: 16262 0 16262

    model name : Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz
    cpu MHz : 3501.000
    cache size : 6144 KB
    cpu cores : 4

    $ smartctl --all /dev/sda
    Model Family: Seagate Barracuda (SATA 3Gb/s, 4K Sectors)
    Device Model: ST1000DM003-1CH162
    $ smartctl --all /dev/sdb
    Model Family: Seagate Barracuda (SATA 3Gb/s, 4K Sectors)
    Device Model: ST1000DM003-1CH162

    $ cat /proc/mdstat
    Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
    md1 : active raid1 sda3[0] sdb3[1]
    16653184 blocks super 1.2 [2/2] [UU]

    md0 : active raid1 sda2[0] sdb2[1]
    959829824 blocks super 1.2 [2/2] [UU]

  • danodano Member

    Have a 20-22u HP rack that I found on craigslist locally -- it has about 8u filled with a bunch of older systems that are usually not running, or a system that is being tested/demo'd.

    Currently have a 1U Rackable Systems machine, Procurve 24 port gig switch, old school Fortinet 60b firewall, a super old 1U SuperMicro half depth celeron box, an ancient 1U AMD opteron machine I used to use for storage, IBM x3550 I used for parts for one in production, and finally a dl360 gen8 with a bunch of intel ssd dc3500 disks that I am testing now.

  • WilliamWilliam Veteran

    a few HP N40L (7 currently), a 3U computing node, 2 3U storage nodes - Total around 800W and i pay like 40eur/month for them in power

  • CarpeCarpe Member

    Does router count as home server, per se, per lowend? -;)

Sign In or Register to comment.