New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Probably China telecom has a 1Mbps upload/download link
http://www.speedtest.net/my-result/4292243222
http://www.speedtest.net/my-result/4292238641
problem is.. i can't find a vps from those place that won't break my wallet
speedtest.net/my-result/4292239295
speedtest.net/my-result/4292253875
Moscow based DC with 1Gbps link, not all hosts around China gave same speed, varies from 2Mbps to 10Mbps.
Speedtest servers in China should be taken with a grain of salt, it's as everywhere colocated HW and BW (especially oversubscription on FTTC/ADSL deployments, even more so on 2.5/3/4G) differs from endusers.
--- PING 211.100.35.132 (211.100.35.132) 56(84) bytes of data. ---
64 bytes from 211.100.35.132: icmp_seq=1 ttl=48 time=188 ms
64 bytes from 211.100.35.132: icmp_seq=2 ttl=48 time=186 ms
64 bytes from 211.100.35.132: icmp_seq=3 ttl=48 time=192 ms
64 bytes from 211.100.35.132: icmp_seq=4 ttl=48 time=190 ms
[root@lg ~]# ping 211.100.35.132
PING 211.100.35.132 (211.100.35.132) 56(84) bytes of data.
64 bytes from 211.100.35.132: icmp_seq=2 ttl=49 time=154 ms
64 bytes from 211.100.35.132: icmp_seq=3 ttl=49 time=154 ms
64 bytes from 211.100.35.132: icmp_seq=4 ttl=49 time=154 ms
right now is a terrible time to check speed as people are sleeping, even san jose usa gives me 51/4. Try again in 18 hours and you will see a difference compare to yoru past results.
http://www.speedtest.net/my-result/4292387383
root@ru:~# ping 211.100.35.132
PING 211.100.35.132 (211.100.35.132) 56(84) bytes of data.
64 bytes from 211.100.35.132: icmp_req=1 ttl=51 time=145 ms
64 bytes from 211.100.35.132: icmp_req=2 ttl=51 time=155 ms
64 bytes from 211.100.35.132: icmp_req=3 ttl=51 time=149 ms
64 bytes from 211.100.35.132: icmp_req=4 ttl=51 time=149 ms
64 bytes from 211.100.35.132: icmp_req=5 ttl=51 time=141 ms
64 bytes from 211.100.35.132: icmp_req=7 ttl=51 time=147 ms
64 bytes from 211.100.35.132: icmp_req=8 ttl=51 time=149 ms
64 bytes from 211.100.35.132: icmp_req=9 ttl=51 time=142 ms
Just wondering how can you tell if a connection goes thru beijing. I'm in Shanghai and all outboundary connections goes thru Shanghai Telecom main exit (seen in MTR result).
Rebalancing is the nasty thing, so I can only say currently CN2 has the most consistent performance for CT (<2% loss at peak time), if not considering commercial private links.
Probably Shanghai telecom has only 1mbps link to Russia
Usual down speed to Linode JP is 10-20mbps off-peak time and 5mbps peak time.
Too bad they are limiting the amount of CN2 you can buy and the amount they will sell until they finish further upgrades, and they are asking $90/Mbps lol
That's pretty cheap already. It's China bandwidth.
There are some good VPS provider in chinese mainland ,such as aliyun and tencentyun .They are two of the best VPS provider in China. But you should know you must acquire an ICP license from the chinese government before you start your website. It may be a lot of paperwork.
And if you choose the VPS in Hongkong, you don't need to acquire an ICP ,and the speed is very friendly to Chinese mainland users.
any asia country direct to china only subjected to best effort basic. No one can guarantee the performance. If you are not plan to put a high budget on china bandwidth, i am advise you don't put any hope on this.