Looking for dedicated server in Europe with good peering to AU

smrgarb

Number of Cores: Minimum 8+
RAM: 16-32 DDR4/5 is fine
Disk Space: Main boot drive 3TB+ with Storage up to 64TB HDD
Disk Type: NVME Main + HDD secondary

Bandwidth: ANY
Port Speed: 5-10Gbit

DDoS Protection: ANY

Number of IPs: 1

Location: ANY in Europe (Preferably NL or DE)

Budget: Flexible ~150USD/month can be flexible with pricing.

Billing period: Yearly (preferable) or monthly.

Extras: iGPU enabled + root access

smrgarb

iGPU is optional but preferable. I'd rather good networking than iGPU

forest

What do you need the iGPU for? Hardware transcoding?

smrgarb

Yeah correct but can make do without it. I was recently running a server without it and 3 transcodes (4c/8t) server got throttled as it was on 100%. I assume higher core count would help out

forest

@smrgarb said:
Yeah correct but can make do without it. I was recently running a server without it and 3 transcodes (4c/8t) server got throttled as it was on 100%. I assume higher core count would help out

What will help a lot is AVX512 and a high core clock, but what will help even more is proper encoding settings. For example, AV1 on preset 13 is going to be extremely fast (especially with tiling) and the quality won't be too bad at all.

And if this is a dedicated transcoding machine (i.e. you don't mind if it's using 90% CPU all the time), then if you can manage to fit everything in software, the quality will be better than what you can get in hardware. Software encoding will always provide superior visual quality at any given bitrate than hardware encoding.

smrgarb

Interesting, I’ll take a look around for that. Thanks @forest!

smrgarb

@forest said:

@smrgarb said:
Yeah correct but can make do without it. I was recently running a server without it and 3 transcodes (4c/8t) server got throttled as it was on 100%. I assume higher core count would help out

What will help a lot is AVX512 and a high core clock, but what will help even more is proper encoding settings. For example, AV1 on preset 13 is going to be extremely fast (especially with tiling) and the quality won't be too bad at all.

And if this is a dedicated transcoding machine (i.e. you don't mind if it's using 90% CPU all the time), then if you can manage to fit everything in software, the quality will be better than what you can get in hardware. Software encoding will always provide superior visual quality at any given bitrate than hardware encoding.

Just saw your edit, so would I benefit from a system that has a lot of higher clock? Is that only featured in servers equipped with a R7/R9? Epyc doesn’t have that support?

forest

@smrgarb said:

@forest said:

@smrgarb said:
Yeah correct but can make do without it. I was recently running a server without it and 3 transcodes (4c/8t) server got throttled as it was on 100%. I assume higher core count would help out

What will help a lot is AVX512 and a high core clock, but what will help even more is proper encoding settings. For example, AV1 on preset 13 is going to be extremely fast (especially with tiling) and the quality won't be too bad at all.

And if this is a dedicated transcoding machine (i.e. you don't mind if it's using 90% CPU all the time), then if you can manage to fit everything in software, the quality will be better than what you can get in hardware. Software encoding will always provide superior visual quality at any given bitrate than hardware encoding.

Just saw your edit, so would I benefit from a system that has a lot of higher clock? Is that only featured in servers equipped with a R7/R9? Epyc doesn’t have that support?

EPYC does have AVX512, but typically it's focused on lower base clocks but over many cores, which is very useful if you're hosting a lot of VMs or running highly parallel tasks. Ryzen processors tend to have fewer, but faster cores. With video encoding, there are rapidly diminishing returns to be had by increasing parallelism. I find the sweet spot to be around 4 threads per encode.

What codec are you transcoding to?

smrgarb

Mostly to h264/x264 or HEVC/x265 really.

smrgarb

I don’t think I was specific enough, so I’m commenting with clearer requirements.

I’m looking for a storage-focused dedicated server and would appreciate provider or deal recommendations.

What I need:

• Type: Dedicated server (storage oriented)
• Location: Europe, ideally Netherlands (NL) (open to other EU if network is solid)
• Storage: 24–32TB to start, with the ability to grow over time
• Network: 10Gbit port required
• CPU: Prefer higher core count
• RAM: Enough for caching + multiple services (flexible depending on offer)
• Bandwidth: High included transfer or unmetered preferred
• DDoS protection: Yes
• IP addresses: 1x IPv4 only (that’s all I need)

Budget: Around $150 USD/month
Billing: Monthly preferred (quarterly/yearly OK if pricing is better)

Thanks in advance for any suggestions!

introserv_rd

Budget: Around $150 USD/month
Billing: Monthly preferred (quarterly/yearly OK if pricing is better)

Thanks in advance for any suggestions!

Hi. It's difficult to meet your budget requirements - the 10G port increases the cost considerably. We can suggest the following setup:

Location: Netherlands
CPU: AMD EPYC 7402P
Memory: 64GB REG ECC DDR4 (Up to 1024GB)
Storage: 1TB SSD
Storage: 2x 16TB SATA (Up to 12x 16TB HDD)
Port: 10 Gbit/s - 100TB Traffic
IP-KVM: iDRAC
Upgrades available

Starts at €239.20/month

6% discount for 12-month upfront payment.

AirnodeHosting

Hi, i can offer the following:

CPU: 2x Intel Xeon Gold 6150 (18c/36t, 2.7/3.7Ghz)
RAM: 32 GB DDR4 ECC (could also upgrade it to 64GB)
Storage: 1x 1TB Nvme + 3x 16TB HDD (higher nvme or HDD also possible)
Uplink: 10G / Bandwidth: 100TB Outgoing), Unmeterd (Incomming)

Included:
2.5Tbit Ddos Protection Included
1x Dedicated IP Address Inculded
24/7 Support
IPMI Acces
Full Root Access

Location: Netherlands Amsterdam (Digital Realty AMS5)

Price: €149.99/mo excl tax

Delivery time: (there should be a new server installed for this installation, so we will talk about what the delivery time will be)

Ownwebservers

Get an incredible 55% OFF on cheap dedicated servers at OwnWebServers. Experience raw performance with managed support and ultra-fast connectivity. Perfect for high-demand applications that can't afford to slow down. Use promo code SERVER55 at checkout to claim your first-month discount. Elevate your hosting with unbeatable reliability and 24/7 expert care!

cyberse

@smrgarb said:
Number of Cores: Minimum 8+
RAM: 16-32 DDR4/5 is fine
Disk Space: Main boot drive 3TB+ with Storage up to 64TB HDD
Disk Type: NVME Main + HDD secondary

Bandwidth: ANY
Port Speed: 5-10Gbit

DDoS Protection: ANY

Number of IPs: 1

Location: ANY in Europe (Preferably NL or DE)

Budget: Flexible ~150USD/month can be flexible with pricing.

Billing period: Yearly (preferable) or monthly.

Extras: iGPU enabled + root access

Got several Dedis available on NODESTOCK

jsg

Good luck!