All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Looking For Low Cost KVM/VirtuozzoKVM VPS in ASIAN COUNTRY
Hi Community+Providers.
Me & business partners looking for low cost VPS with Host server physically located inside a country in ASIA, such as : (Batam/Medan, Indonesia) , (Penang, Malaysia) , (Changi/Tuas, Singapore) , (Karachi, Pakistan), (CoxsBazar/Kaukata, Bangladesh) , (Marmaris, Turkey) , (Busan, South-Korea) , etc or very nearby connected cities,
and in below we shown what else are needed/required.
Website in ENGLISH.
KVM / Virtuozzo-KVM type VPS ( KVM allows direct access to CPU/Processor's encryption core & thats needed ) :
• vCPU : 2 to 8 cores. Host processor EPYC preferred or Xeon or Ryzen.
• Physical/Hardware RAM : 4GB to 16GB
• Primary/Boot Storage : NVMe Drives 40GB to 1TB
• Network Port Speed : 1Gbits/s to 10 Gbits/s
• Bandwidth (BW) : 2TB to 20TB/month
• SMTP/Email : Open Port-25 for Unlimited+Unmetered email SMTP send+receive (via my/our/VPS-owner's own email-server in VPS), as long as usage is under+within the maximum BANDWIDTH (BW) allotted per month for the KVM VPS plan.
• Allots 1 to 8 IPv4-address(es)
• Allots atleast 1 NATIVE IPv6 /64 SubNet
• Supports setup of BGP Session Announcement aka BYOI (Bring Your Own IP) & Allow to Add our (VPS-owner's) own IPv6 /48 subnet into the VPS ID of KVM VPS , (as 2nd Subnet, other than the 1st/NATIVE IPv6 /64 subnet from VPS-Provider) . Usually VPS-Provider's ISP or UPSTREAM-Provider, and VPS-Owner's LIR/Subnet-Provider, and VPS-Provider, these 3 parties need to collaborate to setup BGP Session Announcement for a subnet traffic come/go from/into a spacific KVM VPS / server, based on unique VPS ID of KVM VPS.
• And VPS-provider/operator (or VPS-operator's ISP or UPSTREAM-Provider) will also configure their DNS settings & allow to DELEGATE NS (of my/our/VPS-Owner's own IPv6 /48 SubNet) toward our/VPS-owner's own domain NAMESERVER running inside KVM VPS provided by VPS-Provider . This will allow us (VPS-owner) to set/change RDNS (PTR DNS record) of any IPv6-address under our own IPv6 /48 subnet, & will allow us to assign different IPv6 /64 subnet (from our own IPv6 /48 subnet) to our different customers and to our different server-software, etc.
• VPS-Provider's KVM VPS Control Panel (CP) has RDNS (PTR DNS record) set/change option for each IPv6-address in the allotted/assigned NATIVE IPv6 /64 Subnet, & CP has same option to set/change RDNS for allotted/assigned IPv4-address(es) , Or has API to set/change RDNS of IP-Address (when used from KVM VPS & when have a right token/security-key) , Or, VPS provider has ticket system that will set/change RDNS with higher priority without any questions asked.
Billing Cycle : Monthly / Annual.
Price : USD $2 to $7/monthly , Or, USD $20 to $70/annually.
Quantity : 1 unit , (few months later another unit)
ADDITIONAL / EXTRA INFO :
We have already obtained 2 KVM VPS (within the price mentioned in above) : 1 from USA & 1 from EU ( has 1 IPv4-adrs, IPv6 /64 subnet, 3+ vCPU cores, 8GB+ RAM, 60 GB+ NVMe, Network port 1Gbps & 10Gbps, Open Port-25, BW: 8TB+, Ticket based RDNS setup/change, etc),
and now we need 1 from a country in ASIA.
After RDNS (PTR DNS record) setup of IPv4-address is done,
then we can begin software+service setup+test & dev-works & (freemium+premium) service sale, etc, and 1st thing we have to setup is our NAMESERVER (by using 3 IPv4-address from 3 VPS).
After setup NameServer, then our VPS-Provider can begin to setup BGP Session Announcement of our own IPv6 /48 subnet (which we obtained from LIR/Subnet-provider) toward our KVM VPS ID in VPS-Provider's ASN settings (or in VPS-Provider's ISP's ASN settings or in VPS-Provider's UPSTREAM-Provider's ASN settings).
Then our VPS-Provider (or VPS-Provider ISP or UPSTREAM-Provider) can begin to configure their DNS settings to DELEGATE NS (for our IPv6 /48 subnet) toward our domain NAMESERVER running inside our KVM VPS which is hosted by VPS-Provider's host server.
In each KVM VPS we will be using DEBIAN or Proxmox , CP : HestiaCP / Virtualmin / ISPConfig , nginx web/webmail/...server , email-server (& anti spam/virus checkers) , DNS+DNSSEC server/Nameserver , Database server , SSH server , Instant-messaging (IM) server , etc.
Almost all, except maybe NAMESERVER ~= DNS server, of the above mentioned server-software(s), will run under HA-Cluster (Gluster) manager+server : HA=High-Availability . Cluster = group/set of related separate nodes/computers/servers working as one computer : To make sure, our (email, web, database, ssh, IM, etc) server-software are working+available for our customers+users+visitors, even when 1 or 2 VPS(es)/nodes have gone down, out of 3 VPS/nodes,
and Cluster manager+server will also allow our (email, web, database, ssh, IM, etc) server-software to distribute workload to our other less-busy VPS/node ) , if the server-software also supports cluster mode functionalities.
We do not send any SPAM email. We send emails only to our existing customers/users, or who are querying for info from us , or we send queries to our vendors, various service-providers, etc.
Our customers will be forced to limit their email usage (send+receive) thru assigned IPv6 /64 subnet (from our own IPv6 /48 subnet) based email-server, configured to use customer's own domain that is SPF+DKIM+DMARC signed+verified. So they(our-customers) will have to send non-spam email, or-else their own domain & our IPv6 subnet (from IPv6 /48 subnet) will be marked as Spammer by Email-service-providers (and/or RBLs), which will result as loss of security-deposit of subnet, to restore back it as CLEAN subnet (which can/may require 2 months).
Our customers will-not & cannot use any of our IPv4-addresses (assigned to us by our VPS-Provider), and our customers will-not & cannot use any of our domains based email-server. Our customers also cannot use the NATIVE IPv6 /64 subnet assigned by VPS-Provider, that Native IPv6 /64 subnet will only be used by our own domain's official use+communication purpose with customers & our service-providers.
We will not allow your or our IP-addresses or domains get marked as "Spammer" etc by RBLs or email-service-providers such as GMail, Yahoo, Microsoft Outlook/Hotmail, etc.
Thank you in advance.
Comments
wall of text
Good luck with your budget
that's alot of information for a low end vps
Isn't this generated by LLM (AI)?
I MADE A MISTAKE IN MY TOP REQUEST/POST.
I USED : ... VPS-PROVIDER ALLOWS TO ... "DELEGATE NS" OF OUR-OWN IPv6 /48 SUBNET ... < -- ITS WRONG ( As that indicates to Delegate Forward lookup Zone ).
CORRECTION : ... VPS-PROVIDER ALLOWS TO ... DELEGATE REVERSE-ZONE OF OUR-OWN IPv6 /48 SUBNET ...
AKA ... DELEGATE REVERSE-DNS ... SUB-DELEGATE REVERSE-ZONE ... DELEGATE RZ W/ NS ... REVERSE DNS DELEGATION ... etc
MORE CORRECT : ... VPS-PROVIDER NEED TO DELEGATE REVERSE-ZONE OF OUR(VPS-OWNER's) OWN IPv6 /48 SUBNET , BY PUTTING/ADDING OUR NAMESERVER'S NS RECORDS / HOSTNAMES IN THE REVERSE-ZONE FILE/SETTINGS IN THEIR (VPS-PROVIDER's) DNS SERVER ...
VPS-PROVIDER RZ-DNS : it is similar to setup RDNS (PTR DNS record) in VPS-Provider's DNS-server's reverse-zone file for the allotted IPv4-address ...
but instead of adding PTR DNS record in reverse-zone file for IPv4-Address,
For REVERSE-ZONE DELEGATION , VPS-Provider will need to goto their DNS-Server's reverse-zone file for (VPS-owner's) IPv6 /48 subnet , & then put VPS-Owner's domain's Nameserver's NS DNS records )
More info/example : https://serverfault.com/questions/433400/ipv6-reverse-dns-delegation
RIR VPS ISP : And During "BGP ANNOUNCEMENT" SETUP ... one of the step is , VPS-Provider's ISP or IP-Address Subnet Provider is setting up data records in their AS / ASN records in their local-area's/zone's RIR registry (RIPE, ARIN, APNIC, ...) authority.
In that step, VPS-Provider's ISP or IP-Address Subnet Provider will goto their AS / ASN's manage "Reverse DNS Delegation" tab/section (for the VPS-Owner's IPv6 /48 subnet),
& there they will setup/select/specify Nameserver that will be handling reverse-zone of (VPS-Owner's) IPv6 /48 subnet ... by putting/adding NS DNS records of their(VPS-Provider's ISP or IP-Address Subnet Provider) own Nameserver(s), (not VPS-Owner's Nameservers) . By the way, VPS-Provider's ISP is aka UPSTREAM-Provider.
Then VPS-Provider will setup VPS-Provider's DNS-Server's reverse-zone file , & specify VPS-Owner's Nameserver(s) NS DNS records, as mentioned in above "VPS-PROVIDER RZ-DNS" paragraph.
https://www.apnic.net/manage-ip/manage-resources/reverse-dns/
https://apps.db.ripe.net/docs/Database-Support/Configuring-Reverse-DNS/#automated-update-of-dnssec-delegations
https://www.arin.net/resources/manage/reverse/
RIR VPS OWNER : During "BGP ANNOUNCEMENT" SETUP ... in one of the step , IPv6 /48 Subnet-provider (aka LIR aka LIR/Subnet-Provider) will goto their AS / ASN settings in their local-zone's RIR registry authority (ARIN, RIPE, APNIC, ...).
In that/those settings LIR/Subnet-Provider will create a data object/... for Subnet-user (that is me/us), and under that data object/... LIR/Subnet-Provider will add our (Subnet user's) domain's Nameserver NS DNS records , and LIR will also add data to indicate which exact IPv6 /48 subnet is allotted to the Subnet-User.
HOW TO SETUP BGP ANNOUNCEMENT (BGP ROUTER/SERVER) :
https://labs.ripe.net/author/samir_jafferali/build-your-own-anycast-network-in-nine-steps/
https://render.com/blog/how-to-build-an-anycast-network
https://networkdirection.net/articles/routingandswitching/bgp-with-a-service-provider/
https://www.lir.services/blog/asn-setup/
https://www.bgphelp.com/2017/01/22/bgp-for-enterprise-networks/
https://www.bgp.org/blog/how-bgp-routing-really-works
https://www.datapacket.com/blog/bird-bgp-configuration
https://www.animmouse.com/p/my-asn-journey-configuring-bgp-on-vps/
https://natecatelli.com/posts/intro-to-bgp/
https://howtorouteswitch.com/bgp-configuration/
https://yetiops.net/posts/anycast-bgp/
https://bgp.services/bgp-vps-providers
https://datatracker.ietf.org/doc/html/rfc7454
https://www.iana.org/assignments/bgp-tunnel-encapsulation/bgp-tunnel-encapsulation.xhtml
SUBNET (IPv6 / IPv4) can also be tunneled into a VPS , when VPS-Provider do not want to setup BGP-Announcement or Cannot setup BGP-Announcement (for various reasons/factors).
Subnet that is setup thru BGP-Announcement works much faster than tunneled subnet.
VPS-Provider/... provided native subnet is slightly faster than BGP-Announced subnet.
https://bgp.training/tunnels/bgp-tunnels
https://gcore.com/learning/bgp-gre-facilitate-ddos/
https://bgp.he.net/
https://tunnelbroker.net/
https://route64.org/en
https://lowendtalk.com/discussion/166125/
https://bgptunnel.com/
https://lowendbox.com/blog/route48-org-free-ipv4-to-ipv6-tunnel-broker-service-plus-much-more/
https://tunnelbroker.services/
https://wikimili.com/en/List_of_IPv6_tunnel_brokers
https://www.arin.net/vault/participate/meetings/reports/ARIN_XXIII/pdf/sunday/ipv6_tunnel_brokers.pdf (PDF file, 2.2MB)
https://www.sixxs.net/main/
To use additional subnet in your VPS/server , registering+paying for AS / ASN is not always necessary.
If you need to obtain large subnet from RIR , then creating AS / ASN in your local zone's RIR registry/authority is needed , and for other larger scaled routing needs , and if you are VPS-Provider then , etc.
But if you are leasing / using smaller subnet from LIR , then creating+registering+paid AS in RIR registry/authority is not must/necessary.
LIR can help to create necessary minimal data in RIR registry/authority for free or for very small amount of one time fee , for the subnet user.
Note : I have purposefully changed few standardized-words or word-combinations into more common words.
Hope these help both VPS-Provider & VPS-Owner
Wtf
I leave my wall of text paper to see another wall of text...
No one with the patience to read all of that is going to sell you anything for $2/month, I feel like you owe me $2 just from making me read that massive wall of text.
There has to be a LET rule where it isn't allowed to just post a wall of text
lol ... i'm sure you you did not read it all ...
who needs to, will, which ever portions they want/need to ...
Asia + High BW + BYOIP + BGP never have that price , atleast ten time it and you might have something from cloud provider
They also say that brevity is the sister of talent. But not for everyone.
@Virtury can help you maybe. (In Pakistan).
You should add this TLDR section at the beginning of your post.
TL;DR:
We're looking for a low-cost VPS with the following specifications:
Location:
Technical Requirements:
Billing:
Additional Info:
i'm agree!
"Layer" 1C2G-SG VPS plan does not meet my requirements, but worth looking : https://lowendtalk.com/discussion/196369/
I'm talking with Sales+Tech support of 2 other VPS providers from 2 countries in ASIA ... if matches or comes close to my mentioned requirement , i will mention their names.
yes
@atErik wrong industry bro, you may fit well in essay writing service.
Here is a list of VPS Providers that supports BGP Session/Announcement for VPS or VDS or Dedi : https://bgp.services/bgp-vps-providers
Here is a list of BGP TUNNEL service providers : https://bgp.services/bgp-tunnel-providers
That ship has sailed already here.
We can BGP Sessions (BYOIP/Transit). Location Jakarta, Indonesia. But looking at the budget you have, we can say to save your money to achieve the desired expectations.
The "HostHatch" VPS-Provider's atleast 1 KVM VPS plan has come very close to my requirements:
The "NVMe 4 GB" plan : KVM VPS , Location choice : Singapore or Hong Kong or Sydney,Australia , 2 AMD EPYC Milan core (fair share) , 4 GB DDR4 RAM , 20 GB NVMe Storage , 1 TB bandwidth , BGP and IP announcement - BYOIP ( You can announce your own IP space with us, which will then be routed to your server(s). )
Its now priced at $70/year (thats: $5.83/monthly).
Above plan has 20 GB NVMe , my requirement was 40 GB NVMe.
Above plan has 1 TB BW, but my requirement was 2 TB BW.
1 TB BW is around $1 , so take the above 2nd deficient, out, as $6.83/month is still within my requirements.
i could not find option to increase NVMe size.
Hi @Patriarch , my DREAM may become reality soon.
Hi @fluffernutter , finally found a provider that can almost match my requirement , and so I gave myself the $2 for reading the whole thing, & for posting atleast some correction, ...
Hi @servzen , thanks but "Virtuary" VPS no plan matched my mentioned requirements, Because, even their $180/m plan has max speed 500 Mbits/s.
I think i read Virtuary's 1 of the earlier post here, where they said they do support BGP sessions for VPS. But i do not know if they restrict Email/SMTP/Port-25 usage or not.
The "AdvinServers" > Cloud VPS(s) > KVM Premium VPS(s) > "Johor,MY/Malaysia" (Asia) > "KVM Premium XS" VPS : 2 vCPU , 4 GB RAM , 64 GB NVMe SSD , 500 GB/month Bandwidth , Host: AMD EPYC 9004 Genoa Virtual Servers , $6/month.
In above VPS plan, BW is only 500 GB/month, But my requirement is 2 TB/month (2000 GB/month).
Other factors matched or very-very close, (to my/our requirements).
Below Policies/Rules are applied by AdvinServers :
• They support BGP Sessions if customer purchased atleast $192/yr or atleast $29/month services !! said to open ticket to request for exception.
They support BYOIP if customer purchased atleast $48/yr or atleast $16/month services, said to open ticket to request for exception.
• They support Delegation of rDNS/reverse-zone to customers nameservers, after 100 days of active service . ( So For 1st 100 days, customer's/VPS-owner's all domain's all rDNS (PTR DNS record) of IPv4/IPv6 addresses, will have to be setup via their ticket & request there to set rDNS (PTR dns records) !! )
• They will open Email SMTP/Port-25 , only after 100 days of active service !! ( So, for 1st 100 days, all domains owned by VPS-owner, have to avoid using any emails through AdvinServers provided VPS !! So, before getting VPS in AdvinServers, Customers/VPS-owners have to find & rent + configure such an emailhost service-provider that allows+accept customer's/VPS-owner's ALL emails for ALL domains !! )
( Its good that there is no rule that says for 1st 100 days HTTP/HTTPS/Port-80/Port-443 etc etc usage not allowed. )
( Its good that there is no rule that says for 1st 100 days, customers have to wait after pay & cannot use any service in that period, & after 100 days, VPS, a server, will be ready to be used/configured as server. )
( KEEP SLEEPING / HIBERNATE it for 100 DAYS. )
So you may get the VPS, & then you should wait 100 days, & then move into VPS , & then setup rDNS (PTR dns record of IPv4-address) , then Nameserver , then BGP/BYOIP , then Put NS in Subnet's Reverse-Zone , then web + Email/SMTP server + database, etc.
PROBLEMS RELATED TO RESTRICTIONS ON EMAIL/SMTP/PORT-25 USAGE :
Removing/De-listing an IP-address (IPv4/IPv6) from RBLs/Blacklists may/can require 10 to 60 days for an individual user for 1 IP-address at a time.
So after getting VPS , 1ST request VPS provider to setup the RDNS (PTR dns record) in reverse-zone file of assigned IPv4-Address, by using hostname from your own domain, that you will use as your emailserver hostname , such as "mx.example.com."
And 2NG THING you have to do is, check the assigned IPv4-address in Blacklist/SpamList tester website , to find out which Blacklist site(s) have marked the IPv4-address as Spammer/Banned/Abuser/etc.
To remove/delist/unlist the IPv4-address from RBL/Blacklist site , Blacklist site operator will check+verify the applicant , whether applicant is the actual user or not of that assigned IPv4-address,
so they will need you to send/receive email into your domain emailserver that is using the blacklisted IPv4-address , to remove from blacklist.
So you will have to setup an emailhost (mail-server) in your VPS.
Which needs sending/receiving few emails to remove from blacklists.
BUT IF VPS PROVIDER DO NOT ALLOWS YOU TO SEND/RECEIVE EMAILS THEN YOU HAVE TO WAIT THE PERIOD VPS-PROVIDER PROHIBITED EMAIL USAGE.
AND AFTER THAT PROHIBITED-PERIOD TIME, YOU HAVE TO BEGIN VERIFICATION in RBL SITES, THEN AGAIN WAIT 10 TO 60 DAYS !!
SO VPS-PROVIDER'S THIS TYPE OF RESTRICTION/PROHIBITION CREATES DOUBLE WAIT-PERIOD.
As an example, in AdvinServer case ( who prohibits email usage for 1st 100 days ) , 1st YOU HAVE TO WAIT 3 MONTHS + 10 DAYS , THEN LETS SAY YOU NEED 2 DAYS TO SETUP EMAIL-SERVER , THEN YOU APPLY FOR REMOVAL/DELISTING OF your IPv4-ADDRESS FROM BLACKLISTS IN VARIOUS BLACKLIST OPERATOR SITES , ... THEN WAIT AGAIN FROM 10 TO 60 DAYS ... THAT IS 5 MONTHS OF WAITING FOR USING A VPS AS EMAIL-SERVER !!
To load emailhost In VPS , load any control-panel ( CP ) software : Virtualmin-GPL or Hestia CP etc control-panel are easy to load & free ... this type of CP (control-panel) software will allow you to configure VPS with various essential daemons (servers) . So use the Email-Server option/page in CP , also setup DKIM, DMARC, SPF, etc in emailhost & in domain DNS settings.
The fuck is this
You should get pay you $2 dollar for writing a wet dream vps deal!
You can get Bangladesh & Singapore KVM VPS at My Partner's Company MetroVPS (registered in Bangladesh & USA).
https://metrovps.com/products/vps
Use Coupon: FREEDOM for 60% Off which will result into $4/Month for the 1st Plan (1C/2G/25G/250-500G BW/1 IP) for $4/Month.
2C/4G/50G/500-1000G BW/1 IP) will cost $8/Month (Slightly more than your preferred budget). In this Planm Windows is also allowed as per my knowledge.