Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


what do you think about this NVME device is it failing ?
New on LowEndTalk? Please Register and read our Community Rules.

what do you think about this NVME device is it failing ?

momkinmomkin Member
edited August 17 in Help

Hi ,
I have a server with this nvme device which has "99% percentage used" even though the write and reads are low and this device supposed to have 1600 TBW according to this :
https://www.gigabyte.com/SSD/GIGABYTE-NVMe-SSD-1TB/sp#sp

=== START OF INFORMATION SECTION ===
Model Number:                       GIGABYTE GP-GSM2NE3100TNTD
Serial Number:                      SN204751649328
Firmware Version:                   EDFM60.0
PCI Vendor/Subsystem ID:            0x1987
IEEE OUI Identifier:                0x6479a7
Total NVM Capacity:                 1,024,209,543,168 [1.02 TB]
Unallocated NVM Capacity:           0
Controller ID:                      1
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,024,209,543,168 [1.02 TB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            6479a7 3fd030004c
Local Time is:                      Wed Aug 17 17:05:18 2022 CEST
Firmware Updates (0x12):            1 Slot, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005e):     Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Maximum Data Transfer Size:         64 Pages
Warning  Comp. Temp. Threshold:     70 Celsius
Critical Comp. Temp. Threshold:     85 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     3.50W       -        -    0  0  0  0        0       0
 1 +     1.90W       -        -    1  1  1  1        0       0
 2 +     1.50W       -        -    2  2  2  2        0       0
 3 -   0.0700W       -        -    3  3  3  3     5000    1900
 4 -   0.0020W       -        -    4  4  4  4    13000  100000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         1
 1 -    4096       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        30 Celsius
Available Spare:                    100%
Available Spare Threshold:          5%
Percentage Used:                    99%
Data Units Read:                    164,372,826 [84.1 TB]
Data Units Written:                 300,745,649 [153 TB]
Host Read Commands:                 2,109,527,296
Host Write Commands:                4,734,805,548
Controller Busy Time:               27,596
Power Cycles:                       7
Power On Hours:                     13,468
Unsafe Shutdowns:                   6
Media and Data Integrity Errors:    0
Error Information Log Entries:      13
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0

Error Information (NVMe Log 0x01, max 16 entries)
No Errors Logged

What do you think guys is it failing or normal ??

Comments

  • antonpaantonpa Member, Patron Provider

    I think its failing and you must to make all needed backups. Easiest way it to replace it with new one, but where is someone who can repair it. Also in our practice much more reliable manufactures its Samsung and usually we are using NVMe and SSD of Samsung.

  • mxmlamxmla Member, Patron Provider

    Hi! Could be a firmware bug as well, we had a few Samsung NVMe SSD's counting from 100 % down towards 0, firmware update fixed it.

  • momkinmomkin Member

    @mxmla said:

    >
    it was counting from 0 to 99 it just weird that he got 99% with low writes and reads !

    Thanked by 1mxmla
  • ralfralf Member

    I thought percentage used was always pretty much meaningless (nominal amount of disk written to) and only "available spare" was relevant (i.e. percentage of the disk that can be re-written if needed).

  • darkimmortaldarkimmortal Member
    edited August 17

    Looks like gigashite optimistically x10’d the marketing/warranty TBW without updating the firmware. Just keep using it until you run into actual issues (errors, depleting available spare, etc). If it ever reports itself as failing then easy warranty claim, but I don’t think at the current stage you can or should RMA it

Sign In or Register to comment.