Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Categories

In this Discussion

› › All Hetzner auction servers out of stock?
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

All Hetzner auction servers out of stock?

NekkiNekki Veteran
in General

I wouldn't normally post a new thread for this, but it's Saturday and there's fuck all going on, so why not.

Being Saturday evening, I'm doing what I normally do and ordering a couple of Hetzner auction servers so I can install Debian, check the disks and either cancel immediately in disgust or cancel tomorrow morning after sleeping on it and realising I don't need it.

However, this particular Saturday evening, it appears ALL auctions servers are out of stock. Have Hetzner worked out what I'm doing and ruined my 'fun' or is anyone else experiencing the same issue.

Thanked by 1TrendyJack
«1

Comments

  • LeeLee Veteran

    I see 5 pages of servers.

  • szymonpszymonp Member

  • emghemgh Member

    Thanks for the thread.

  • NekkiNekki Veteran

    @Lee said:
    I see 5 pages of servers.

    I see the servers, but if I try to order any, I can't.

  • NekkiNekki Veteran

    @szymonp said:

    But can you actually order one?

  • szymonpszymonp Member

    @Nekki said:

    @Lee said:
    I see 5 pages of servers.

    I see the servers, but if I try to order any, I can't.

    I can put it into shopping cart fine, not checking further since I don't need a dedi rn lol

  • NekkiNekki Veteran

    @szymonp said:

    @Nekki said:

    @Lee said:
    I see 5 pages of servers.

    I see the servers, but if I try to order any, I can't.

    I can put it into shopping cart fine, not checking further since I don't need a dedi rn lol

    If I click 'order', they're all out of stock.

  • szymonpszymonp Member
    edited June 2022

    @Nekki said:

    @szymonp said:

    @Nekki said:

    @Lee said:
    I see 5 pages of servers.

    I see the servers, but if I try to order any, I can't.

    I can put it into shopping cart fine, not checking further since I don't need a dedi rn lol

    If I click 'order', they're all out of stock.

    I can proceed to checkout fine.

  • NekkiNekki Veteran

    @szymonp said:

    @Nekki said:

    @szymonp said:

    @Nekki said:

    @Lee said:
    I see 5 pages of servers.

    I see the servers, but if I try to order any, I can't.

    I can put it into shopping cart fine, not checking further since I don't need a dedi rn lol

    If I click 'order', they're all out of stock.

    I can proceed to checkout fine.

    Motherfuckers

  • LeeLee Veteran

    Yeah, I can order as well.

  • NekkiNekki Veteran

    @Lee said:
    Yeah, I can order as well.

    Double motherfuckers

  • szymonpszymonp Member

    @Nekki said:

    @Lee said:
    Yeah, I can order as well.

    Double motherfuckers

    Try ordering on your phone via LTE

  • LeeLee Veteran

    I see what it is though. Have you got UK selected at the top of the page? Change it to another country and see what happens.

  • NekkiNekki Veteran

    Even with VPN off I can't order, fucking weird. There's a nice one on there too.

  • szymonpszymonp Member

    @Nekki said:
    Even with VPN off I can't order, fucking weird. There's a nice one on there too.

    If you have fastestvpn it has a residential IP server in eu, try that maybe?

  • NekkiNekki Veteran

    @Lee said:
    I see what it is though. Have you got UK selected at the top of the page? Change it to another country and see what happens.

    Yup, that's the problem, fuckers.

    Thanked by 1Lee
  • perspectiveperspective Member

    @Nekki said:
    Being Saturday evening, I'm doing what I normally do and ordering a couple of Hetzner auction servers so I can install Debian, check the disks and either cancel immediately in disgust or cancel tomorrow morning after sleeping on it and realising I don't need it.

    You may be banned for abuse.

  • ErisaErisa Member

    Happens to me when country is set to GB.

    I guess Hetzner hates british people now :]

    Thanked by 1pike
  • szymonpszymonp Member

    @Erisa said:
    Happens to me when country is set to GB.

    I guess Hetzner hates british people now :]

    Maybe they got a big contract with a french company and are celebrating

    Thanked by 1Erisa
  • NekkiNekki Veteran

    @perspective said:

    @Nekki said:
    Being Saturday evening, I'm doing what I normally do and ordering a couple of Hetzner auction servers so I can install Debian, check the disks and either cancel immediately in disgust or cancel tomorrow morning after sleeping on it and realising I don't need it.

    You may be banned for abuse.

    Nah, it's not abuse, it's perfectly legitimate and I often do rent the servers. We've figured out what it is now - if you select the GB VAT option, you can't order anything. I blame Brexit.

    Thanked by 1Erisa
  • NekkiNekki Veteran
    edited June 2022

    @Erisa said:
    Happens to me when country is set to GB.

    I guess Hetzner hates british people now :]

    I assumed pretty much everyone in the world hates the UK, Ukraine aside.

    Thanked by 4Erisa adly pike Peppery9
  • ErisaErisa Member

    @Nekki said:

    @Erisa said:
    Happens to me when country is set to GB.

    I guess Hetzner hates british people now :]

    I assumed pretty much everyone in the world hates the UK, Ukraine aside.

    You may be right.

  • NekkiNekki Veteran

    Right, got round that little conundrum, switch to zero VAT, order, login, VAT added, job done.

    Stick around to see if the disks are under a decade old!

  • ErisaErisa Member

    @Nekki said:
    Right, got round that little conundrum, switch to zero VAT, order, login, VAT added, job done.

    Stick around to see if the disks are under a decade old!

    Now that you've secured yours, what server config/price did you grab?

    Thanked by 1webcraft
  • NekkiNekki Veteran

    @Erisa said:

    @Nekki said:
    Right, got round that little conundrum, switch to zero VAT, order, login, VAT added, job done.

    Stick around to see if the disks are under a decade old!

    Now that you've secured yours, what server config/price did you grab?

    i7-7700, 64GB RAM, 2x4TB, iNIC, DE - €36.84/month

    Thanked by 1Erisa
  • NekkiNekki Veteran

    Quick delivery, 6 minutes! Installimage running.

  • NekkiNekki Veteran 
    smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-18-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Constellation ES.3
Device Model:     ST4000NM0033-9ZM170
Serial Number:    Z1Z902HL
LU WWN Device Id: 5 000c50 07ba9a701
Add. Product Id:  DELL(tm)
Firmware Version: GA6E
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Jun 11 22:04:44 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:        (   90) seconds.
Offline data collection
capabilities:            (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 475) minutes.
Conveyance self-test routine
recommended polling time:    (   3) minutes.
SCT capabilities:          (0x50bd) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x010f   082   054   ---    Pre-fail  Always       -       193711909
  3 Spin_Up_Time            0x0103   093   092   ---    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   ---    Old_age   Always       -       65
  5 Reallocated_Sector_Ct   0x0133   100   100   ---    Pre-fail  Always       -       46
  7 Seek_Error_Rate         0x000f   084   060   ---    Pre-fail  Always       -       295924759
  9 Power_On_Hours          0x0032   041   041   ---    Old_age   Always       -       51811
 10 Spin_Retry_Count        0x0013   100   100   ---    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       64
184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   ---    Old_age   Always       -       119
188 Command_Timeout         0x0032   100   095   ---    Old_age   Always       -       5
189 High_Fly_Writes         0x003a   088   088   ---    Old_age   Always       -       12
190 Airflow_Temperature_Cel 0x0022   054   034   ---    Old_age   Always       -       46 (Min/Max 29/46)
191 G-Sense_Error_Rate      0x0032   100   100   ---    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   ---    Old_age   Always       -       42
193 Load_Cycle_Count        0x0032   099   099   ---    Old_age   Always       -       3302
194 Temperature_Celsius     0x0022   046   066   ---    Old_age   Always       -       46 (0 23 0 0 0)
195 Hardware_ECC_Recovered  0x001a   022   009   ---    Old_age   Always       -       193711909
196 Reallocated_Event_Count 0x0032   000   000   ---    Old_age   Always       -       45
197 Current_Pending_Sector  0x0012   100   100   ---    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   ---    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   ---    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   ---    Old_age   Offline      -       50902 (145 60 0)
241 Total_LBAs_Written      0x0000   100   253   ---    Old_age   Offline      -       471701820499
242 Total_LBAs_Read         0x0000   100   253   ---    Old_age   Offline      -       1469066160613

SMART Error Log Version: 1
ATA Error Count: 119 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 119 occurred at disk power-on lifetime: 27204 hours (1133 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  49d+11:14:01.895  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:14:01.895  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:14:01.894  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:14:01.894  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:14:01.894  READ FPDMA QUEUED

Error 118 occurred at disk power-on lifetime: 27204 hours (1133 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 80 ff ff ff 4f 00  49d+11:13:44.657  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:44.656  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:44.565  READ FPDMA QUEUED
  42 00 01 ff ff ff 4f 00  49d+11:13:44.297  READ VERIFY SECTOR(S) EXT
  35 00 01 ff ff ff 4f 00  49d+11:13:44.296  WRITE DMA EXT

Error 117 occurred at disk power-on lifetime: 27204 hours (1133 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 42 ff ff ff 4f 00  49d+11:13:41.192  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:41.142  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:35.914  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:35.913  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:35.913  READ FPDMA QUEUED

Error 116 occurred at disk power-on lifetime: 27204 hours (1133 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 43 ff ff ff 4f 00  49d+11:13:33.343  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:33.335  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:33.328  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:33.320  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:33.316  READ FPDMA QUEUED

Error 115 occurred at disk power-on lifetime: 27204 hours (1133 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 40 ff ff ff 4f 00  49d+11:13:30.160  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:30.156  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:30.149  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:30.149  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00  49d+11:13:30.149  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     51811         -
# 2  Extended offline    Completed without error       00%     51785         -
# 3  Extended offline    Completed without error       00%     51765         -
# 4  Extended offline    Completed without error       00%     45268         -
# 5  Extended offline    Completed without error       00%     45248         -
# 6  Extended offline    Completed without error       00%     35626         -
# 7  Extended offline    Completed without error       00%     35606         -
# 8  Extended offline    Aborted by host               90%     35475         -
# 9  Extended offline    Completed without error       00%     27490         -
#10  Extended offline    Completed without error       00%     27470         -
#11  Extended offline    Completed without error       00%     27289         -
#12  Extended offline    Completed without error       00%     27269         -
#13  Extended offline    Completed without error       00%     27248         -
#14  Short offline       Completed without error       00%     27237         -
#15  Extended offline    Completed without error       00%     27222         -
#16  Short offline       Completed without error       00%     27212         -
#17  Extended offline    Completed without error       00%     23322         -
#18  Extended offline    Completed without error       00%     23302         -
#19  Short offline       Aborted by host               50%        44         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
  • NekkiNekki Veteran 
    smartctl -a /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-18-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Constellation ES.3
Device Model:     ST4000NM0033-9ZM170
Serial Number:    S1Z1EZG5
LU WWN Device Id: 5 000c50 08c194e12
Add. Product Id:  DELL(tm)
Firmware Version: GA6E
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Jun 11 22:05:57 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 241) Self-test routine in progress...
                    10% of test remaining.
Total time to complete Offline 
data collection:        (   90) seconds.
Offline data collection
capabilities:            (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 487) minutes.
Conveyance self-test routine
recommended polling time:    (   3) minutes.
SCT capabilities:          (0x50bd) SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x010f   078   063   ---    Pre-fail  Always       -       61432051
  3 Spin_Up_Time            0x0103   092   092   ---    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   ---    Old_age   Always       -       76
  5 Reallocated_Sector_Ct   0x0133   100   100   ---    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   093   060   ---    Pre-fail  Always       -       1933715873
  9 Power_On_Hours          0x0032   044   044   ---    Old_age   Always       -       49694
 10 Spin_Retry_Count        0x0013   100   100   ---    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       73
184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   ---    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   ---    Old_age   Always       -       1
189 High_Fly_Writes         0x003a   085   085   ---    Old_age   Always       -       15
190 Airflow_Temperature_Cel 0x0022   053   032   ---    Old_age   Always       -       47 (Min/Max 29/47)
191 G-Sense_Error_Rate      0x0032   100   100   ---    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   ---    Old_age   Always       -       44
193 Load_Cycle_Count        0x0032   097   097   ---    Old_age   Always       -       6905
194 Temperature_Celsius     0x0022   047   068   ---    Old_age   Always       -       47 (0 22 0 0 0)
195 Hardware_ECC_Recovered  0x001a   018   008   ---    Old_age   Always       -       61432051
196 Reallocated_Event_Count 0x0032   000   000   ---    Old_age   Always       -       21845
197 Current_Pending_Sector  0x0012   100   100   ---    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   ---    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   ---    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   ---    Old_age   Offline      -       48152 (12 220 0)
241 Total_LBAs_Written      0x0000   100   253   ---    Old_age   Offline      -       415878077515
242 Total_LBAs_Read         0x0000   100   253   ---    Old_age   Offline      -       1172638210488

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Self-test routine in progress 10%     49694         -
# 2  Extended offline    Completed without error       00%     49670         -
# 3  Extended offline    Completed without error       00%     49650         -
# 4  Extended offline    Completed without error       00%     43153         -
# 5  Extended offline    Completed without error       00%     43133         -
# 6  Extended offline    Completed without error       00%     33510         -
# 7  Extended offline    Completed without error       00%     33490         -
# 8  Extended offline    Completed without error       00%     25374         -
# 9  Extended offline    Completed without error       00%     25354         -
#10  Extended offline    Completed without error       00%     25172         -
#11  Extended offline    Completed without error       00%     25152         -
#12  Extended offline    Completed without error       00%     25122         -
#13  Short offline       Completed without error       00%     25110         -
#14  Extended offline    Completed without error       00%     25094         -
#15  Extended offline    Completed without error       00%     25074         -
#16  Extended offline    Completed without error       00%      8259         -
#17  Extended offline    Completed without error       00%      8239         -
#18  Extended offline    Completed without error       00%      8153         -
#19  Extended offline    Completed without error       00%      8126         -
#20  Short offline       Completed without error       00%         3         -
#21  Vendor (0xdf)       Completed without error       00%         3         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
  • AXYZEAXYZE Member

    @Nekki said:

    @Erisa said:

    @Nekki said:
    Right, got round that little conundrum, switch to zero VAT, order, login, VAT added, job done.

    Stick around to see if the disks are under a decade old!

    Now that you've secured yours, what server config/price did you grab?

    i7-7700, 64GB RAM, 2x4TB, iNIC, DE - €36.84/month

    Where's obligatory yabs?

    Thanked by 1Nekki
  • NekkiNekki Veteran

    @AXYZE said:

    @Nekki said:

    @Erisa said:

    @Nekki said:
    Right, got round that little conundrum, switch to zero VAT, order, login, VAT added, job done.

    Stick around to see if the disks are under a decade old!

    Now that you've secured yours, what server config/price did you grab?

    i7-7700, 64GB RAM, 2x4TB, iNIC, DE - €36.84/month

    Where's obligatory yabs?

    Why the fuck not, it is Saturday after all!

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2022-05-06                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Sat 11 Jun 2022 10:37:22 PM CEST

Basic System Information:
---------------------------------
Uptime     : 0 days, 0 hours, 38 minutes
Processor  : Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz
CPU cores  : 8 @ 900.145 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 62.7 GiB
Swap       : 32.0 GiB
Disk       : 7.2 TiB
Distro     : Debian GNU/Linux 10 (buster)
Kernel     : 4.19.0-18-amd64

fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 1.77 MB/s      (444) | 25.24 MB/s     (394)
Write      | 1.80 MB/s      (451) | 25.78 MB/s     (402)
Total      | 3.58 MB/s      (895) | 51.02 MB/s     (796)
           |                      |                     
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ---- 
Read       | 97.41 MB/s     (190) | 97.83 MB/s      (95)
Write      | 102.59 MB/s    (200) | 104.34 MB/s    (101)
Total      | 200.01 MB/s    (390) | 202.18 MB/s    (196)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed     
                |                           |                 |                
Clouvider       | London, UK (10G)          | 804 Mbits/sec   | 928 Mbits/sec  
Online.net      | Paris, FR (10G)           | 810 Mbits/sec   | 937 Mbits/sec  
Hybula          | The Netherlands (40G)     | 808 Mbits/sec   | 937 Mbits/sec  
Clouvider       | NYC, NY, US (10G)         | 770 Mbits/sec   | 496 Mbits/sec  
Velocity Online | Tallahassee, FL, US (10G) | busy            | busy           
Clouvider       | Los Angeles, CA, US (10G) | 732 Mbits/sec   | 330 Mbits/sec  

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed     
                |                           |                 |                
Clouvider       | London, UK (10G)          | 794 Mbits/sec   | 920 Mbits/sec  
Online.net      | Paris, FR (10G)           | 798 Mbits/sec   | 925 Mbits/sec  
Hybula          | The Netherlands (40G)     | 799 Mbits/sec   | 923 Mbits/sec  
Clouvider       | NYC, NY, US (10G)         | 763 Mbits/sec   | 338 Mbits/sec  
Clouvider       | Los Angeles, CA, US (10G) | 720 Mbits/sec   | 409 Mbits/sec  

Geekbench 5 Benchmark Test:
---------------------------------
Test            | Value                         
                |                               
Single Core     | 1235                          
Multi Core      | 4758                          
Full Test       | https://browser.geekbench.com/v5/cpu/15418685
    Thanked by 1AXYZE
Sign In or Register to comment.