New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
getting into ipv6 and already lost
So I got a nice new test box and I thought why not test ipv6? (Check my previous post with raid error). I guess today is not a lucky day for me. This is the first time for me when it comes to ipv6 config. Been reading for about 3 weeks regarding ipv6 but still a noob.
So after configuring scripts via network config and eth0 scripts,
Restart network
Error:
WARN : [ipv6_add_route] 'No route to host' adding route '::/0' via gateway 'xxxxxxxxxxxxxx::1' through device 'eth0'
And ping6 ipv6.google.com
connect: network is.unreachable.
Comments
#ipv6 on freenode, those guys absolutely love Ipv6 questions, it gets them fired up...they even have an ex HE employee in there.
Currently I am.on a shitty phone without irc. Just blew off house.electricity. nyc is frikkin hot.
Any one else?
Aii hope to fix the power issue soon. Starting to hate TMObile Most of the irc connections are blocked.
Let start giving us a bit of informations:
Distro?
Current configs?
Do you have native ipv6 assignment and routing? are you using a tunnel?
show the output of:
ip -6 a s
ip -6 r s
Thanks
:-)
NETWORKING=yes
NETWORKING_IPV6=yes
IPV6FORWARDING=yes
IPV6_DEFAULTDEV=eth0
IPV6_DEFAULTGW=2001:xxxx:xxxx::1
IPV6_AUTOCONF=no
[root@xxxx ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
NM_CONTROLLED="yes"
ONBOOT=yes
HWADDR=00:22:19:09:B6:32
TYPE=Ethernet
BOOTPROTO=none
DNS1=8.8.8.8
DNS2=8.8.4.4
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=yes
IPV6ADDR=2001:xxxx:xxxx:0000:0100::1
NAME="System eth0"
hmm I need to add some ipv6 DNS servers
Note: I removed a bunch of stuff, plus this is OpenVZ on CentOS 6.2
P.S. Does not matter it's for OpenVZ, you have to have node level ipv6 working first before you can even get containers to use IPv6.
which subnet has that ipv6?
if it's a /64 you should put for example
PV6ADDR=2001:xxxx:xxxx:0000:0100::1/64
Already got.the issue fixed. Was using wrong gateway.