All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Questions about KVM routing
Hello,
I am running a Solus VM slave setup to serve KVM containers. The server currently has 5 IP addresses allocated to it (say 192.168.1.1-192.168.1.5 with a gateway of 192.168.1.1). I requested more IP addresses from my provider and I was allocated a range in a different subnet (say 10.0.0.1 to 10.0.0.10 with a gateway of 10.0.0.1). When I initially setup the machine, I configured a bridge br0 linked to eth0 and configured to work with my 192.xxx subnet. My questions is: how do I use the new set of IP addresses (i.e. 10.xxx subnet) that were allocated to me? Is it even possible?
Here is a copy of my ifcfg-br0 (with original IP addresses replaced with 192..)
DEVICE=br0
TYPE=Bridge
BOOTPROTO=static
BROADCAST=192.168.1.255
GATEWAY=192.168.1.1
IPADDR=192.168.1.2 # this machine
NETMASK=255.255.255.0
NETWORK=192.168.1.0
ONBOOT=yes
The question is - is there a way to incorporate the new subnet (10.0.0.X) to this so it works with Solus?
Thanks very much!
Comments
Also, does OpenVZ generally play better with such circumstances?
Depending on who the provider is and how the IPs are setup.
But you should be able to add the IPs to an alias on br0 eg br0:0
once your provider route the subnet to your server, you only need to add IP's to solusvm
no need to change br0 
As MarkTuner said, it depends on how provider routed those.
At GVH (ColoCrossing) here are my configurations files :
# cat /etc/sysconfig/network-scripts/ifcfg-br0
DEVICE=br0
TYPE=Bridge
BOOTPROTO=static
DNS1=8.8.8.8
IPADDR=108...194
GATEWAY=108...193
NETMASK=255.255.255.240
ONBOOT=yes
# cat /etc/sysconfig/network-scripts/ifcfg-br0:0
DEVICE=br0
TYPE=Bridge
BOOTPROTO=static
DNS1=8.8.8.8
IPADDR=72...74
GATEWAY=72...73
NETMASK=255.255.255.248
ONBOOT=yes
Thank you all for those helpful tips. I was able to get it working as you all suggested by simply adding a bridge alias. Sady - your snippets were most useful. Mark - thanks once again for your help with everything. I really appreciate the service you all do on this forum.