Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop

Categories

In this Discussion

Home › Help
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

SolusVM KVM multiple subnets

SadySady Member
edited October 2014 in Help

Hello everyone,

I've a server which had /29 & it's fully utilized in my personal VMs so i got an additional /28 to fulfill my future needs & i want to route it but i'm not sure how to do so.

I've added usable IPs from /28 in SolusVM GUI but those aren't working, so i talked with SolusVM staff. They are saying that i'll need to bind usable IPs from /28 on br0 which is made for /29.

Can someone of you guide me how to do so ?

I'll really appreciate that.

Thank you !

Comments

  • BhuvanBhuvan Member

    please msg me privately

  • SadySady Member

    @Jack said:
    Which DC?

    Colocrossing, From greenvaluehost

  • aggressivenetworksaggressivenetworks Member

    If its on a vlan you just add it to the solus ip pool with the correct information and it should work. If it is not on a vlan you have to run a routed bridge configuration.

  • SadySady Member

    @aggressivenetworks said:
    If its on a vlan you just add it to the solus ip pool with the correct information and it should work. If it is not on a vlan you have to run a routed bridge configuration.

    Not sure how these are but i tried both of those, IPs are routing to server but VM from /28 are not able to connect to internet :( those from /29 are working fine. Can you guide me what to do ?

  • SadySady Member

    Anyone who can help me ? :/

  • CoreyCorey Member

    @StephenIzzy said:
    Anyone who can help me ? :/

    You need to add a route for the new range. Your containers probably don't know where they gateway is.

  • SadySady Member

    @Corey said:

    Thank you so much for you reply, i'm really a bit worried because of it :(

    You mean needed to add routes on host or containers ? Here are the routes from host :



    [root@kvm ~]# route -n

    Kernel IP routing table

    Destination Gateway Genmask Flags Metric Ref Use Iface

    72.2xx.x24.72 0.0.0.0 255.255.255.248 U 0 0 0 br0

    108.1xx.x3.192 0.0.0.0 255.255.255.240 U 0 0 0 br0

    192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0

    169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0 br0

    0.0.0.0 72.2xx.x24.73 0.0.0.0 UG 0 0 0 br0

    0.0.0.0 108.1xx.x3.193 0.0.0.0 UG 0 0 0 br0



    Is there anything wrong in it ?

  • CoreyCorey Member

    Yes you need to add routes on the host, and I'm not sure if there is anything wrong with it as I am not too familiar with KVM.

  • SadySady Member

    @Corey said:
    Yes you need to add routes on the host, and I'm not sure if there is anything wrong with it as I am not too familiar with KVM.

    I've those routes on host itself but still not sure that what is wrong though :(

Sign In or Register to comment.