New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
CentOS 6 Network COnfiguration
Hello Guyz,
I have installed CentOS 6 64 bit first manually, i means using iLO
I have configured ifcfg-eth0 but it is still can't get online (Neither responding to pings, nor able to ping google)
Can any of you help me with this ? Here is my ifcfg-eth0 content :
DEVICE="eth0"
BOOTPROTO="static"
BROADCAST="104.xx.xxx.31"
DNS1="8.8.8.8"
GATEWAY="104.xx.xxx.1"
HWADDR="F4:CE:46:BF:87:C2"
IPADDR="104.xx.xxx.3"
NETMASK="255.255.255.224"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
Thank you
Comments
ip link show output?
DHCP work?
you have and ip block assigned to you /27?
Here it is that, there is no IPv6 on server, but don't know why it's showing that shit.
Yes, it's a /27 assigned on that.
That mac id is wrong it seems. Remove that line (HWADDR="F4:CE:46:BF:87:C2" ) and restart the networking.
Woohoo, that worked.
Thank you so much, i was messing with it for last 2 days & now planning for a fresh OS install (3 hours waste )
Mods can close this now
No option to report that -_-