Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

KVM VPS – From €6.99/year (~$8.03) – 512MB–16GB RAM – NVMe – 1Gbps – Amsterdam

13»

Comments

  • I found the issue. I checked their platform, and PayPal top-ups come with a €1 handling fee each time! Passing the payment processing fee on to users seems a bit unreasonable to me!

    Passing the fee on to users violates PayPal's terms. That's why it was suggested you report.

    Thanked by 2zed Nekopara
  • plan to have newer CPU? 2017 and 1.8 Ghz seems too low

  • Great deals! I grabbed the available LET-2's. I'll take a couple more if there is a restock :p

    Thanked by 1VPSLAYER
  • What crypto merchant/vendor or inhouse btcpay? What cryptos accepted?

  • @aphex said:
    What crypto merchant/vendor or inhouse btcpay? What cryptos accepted?

    Heleket.

    USDT, BTC, LTC, TRX, ETH, XMR, POL, BNB, USDC, SOL, DASH, DOGE, GRAM, BCH, AVAX, DAI, SHIB

    Thanked by 2aphex VPSLAYER
  • @hoperxu said:
    I grabbed the LET-2 offer and I am currently extremely disappointed with the network speed and connectivity: connecting to the server experiences severe latency or outright times out, and bandwidth has peaked at only 1 Mbps.
    Which makes even a basic apt update run extraordinarily slow. The YABS benchmark has been running for over 30 minutes - binary downloads for fio and iperf3 failed to download completely, and waiting for the Geekbench 6 results feels endless. I really hope these network issues get resolved soon, but as of right now, I cannot recommend taking these offers.

    Update: support fixed the network issue after I submitted a ticket. Everything is working fine now, hope it remains stable.

    Thanked by 1VPSLAYER
  • zedzed Veteran

    @VPSLAYER said:

    @monsoon73 said:

    @NodeSuper said:
    I topped up 7 euros, but why did PayPal deduct 8 euros from me? The amount I actually received was also 7 euros.

    There's a 1 eur payment fee when using PayPal - Which I believe actually violates PayPal's terms about passing on their fees to consumers.

    For paypal payments we take a Payment fee (1,00 €). It shows on the deposit site.

    for the sake of transparency, i flagged this post with a question:

    "does LET have a stance on providers violating paypal terms of service, and shafting the community with extra fees? is this really much different than running nulled whcms or whatever?"

    signed, curious in california.

    Thanked by 1monsoon73
  • I submitted a support ticket quite some time ago, but I still haven’t received any response. Could you please check my ticket and get back to me as soon as possible?

    My VPS download speed has been consistently capped at around 1 Mbps, which is much slower than expected. I would appreciate it if you could look into this issue and provide an update.

  • @Void said:

    @forest said:

    @Void said:

    @VPSLAYER said:

    @Void said:

    @VPSLAYER said:
    All pending vpses has been deployed. the problem has been solved and the plans has been restocked.

    thank you

    @VPSLAYER said:

    @chris477chormier said:
    I remember seeing your recommendation on some offshore listing site.
    The trademark was marked “DMCA ignored”—is that true?

    yes

    Tor exit nodes allowed ? I think I saw just one of your IP in the relay search

    yes

    @forest important news, don’t miss

    Very nice, but unfortunately I already have too many relays in NL.

    Noice.
    Also would it be the cheapest exit node supported plan you’ve come across ?

    Well the 512 MB one would be a little hard to run a relay on but even the 2 GB one at €17.99/yr is probably the cheapest for an exit outside of a BF sale.

    Upstream AS is Liam Kremer so that explains why exits are allowed lol.

    Thanked by 2Void KeyGenMe
  • The service is currently unavailable due to an upstream (503) or internal error (500).

    ?

  • @VPSLAYER said:

    @mnwg said:
    get LET-2 offer, same connectivity issue, Speedtest by Ookla

      Server: Eranium B.V. - Amsterdam (id: 13764)
         ISP: VPSLAYER
    

    Idle Latency: 0.48 ms (jitter: 0.05ms, low: 0.45ms, high: 0.57ms)
    Download: 0.98 Mbps (data used: 870.9 kB)
    3302.65 ms (jitter: 165.56ms, low: 1079.28ms, high: 4057.38ms)

    The issue arose because the LET-2 plan was configured with a port speed of 1 Mbps in the system. This has now been changed. anyone currently on the 1 Mbps speed tier should please open a support ticket, and the speed will be updated immediately.

    I submitted a support ticket quite some time ago, but I still haven’t received any response. Is anyone actually responding to support tickets?

    Could you please check my ticket and get back to me as soon as possible?

  • I was on duty all night, but I couldn't get the replenishment.

  • @forest said:

    @Void said:

    @forest said:

    @Void said:

    @VPSLAYER said:

    @Void said:

    @VPSLAYER said:
    All pending vpses has been deployed. the problem has been solved and the plans has been restocked.

    thank you

    @VPSLAYER said:

    @chris477chormier said:
    I remember seeing your recommendation on some offshore listing site.
    The trademark was marked “DMCA ignored”—is that true?

    yes

    Tor exit nodes allowed ? I think I saw just one of your IP in the relay search

    yes

    @forest important news, don’t miss

    Very nice, but unfortunately I already have too many relays in NL.

    Noice.
    Also would it be the cheapest exit node supported plan you’ve come across ?

    Well the 512 MB one would be a little hard to run a relay on but even the 2 GB one at €17.99/yr is probably the cheapest for an exit outside of a BF sale.

    Upstream AS is Liam Kremer so that explains why exits are allowed lol.

    Herr J.Krause pretty much confirmed it. Have you actually hosted anything on Kremer’s AS before? Curious to hear about your firsthand experience with their network stability and how they handle abuse noise in practice.

    Thanked by 1VPSLAYER
  • VPSLAYERVPSLAYER Member, Patron Provider

    @POMAH said:

    @VPSLAYER said:

    @mnwg said:
    get LET-2 offer, same connectivity issue, Speedtest by Ookla

      Server: Eranium B.V. - Amsterdam (id: 13764)
         ISP: VPSLAYER
    

    Idle Latency: 0.48 ms (jitter: 0.05ms, low: 0.45ms, high: 0.57ms)
    Download: 0.98 Mbps (data used: 870.9 kB)
    3302.65 ms (jitter: 165.56ms, low: 1079.28ms, high: 4057.38ms)

    The issue arose because the LET-2 plan was configured with a port speed of 1 Mbps in the system. This has now been changed. anyone currently on the 1 Mbps speed tier should please open a support ticket, and the speed will be updated immediately.

    I submitted a support ticket quite some time ago, but I still haven’t received any response. Is anyone actually responding to support tickets?

    Could you please check my ticket and get back to me as soon as possible?

    hello, all support requests has been answered. We had a lot of tickets on the waiting list.

  • levonlilevonli Member
    edited September 23

    I managed to place an order during the LET-1 restock and I'm very satisfied. The VPS price is essentially the cost of a single IP :) I also love the control panel — it’s well-thought-out and clearly made with care. In my opinion, this is a prime example for all providers of how a control panel should actually look.
    Many thanks to VPSLAYER!


    [code]

    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

    Yet-Another-Bench-Script

    v2026-09-20

    https://github.com/masonr/yet-another-bench-script

    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##

    Wed Sep 23 13:12:07 +03 2026

    Basic System Information:

    Uptime : 0 days, 14 hours, 27 minutes
    Processor : Intel(R) Xeon(R) Gold 6122 CPU @ 1.80GHz
    CPU cores : 1 @ 1795.776 MHz
    AES-NI : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM : 457.4 MiB
    Swap : 1024.0 MiB
    Disk : 9.8 GiB
    Distro : Debian GNU/Linux 12 (bookworm)
    Kernel : 6.1.0-53-amd64
    VM Type : KVM
    IPv4/IPv6 : ✔ Online / ❌ Offline

    IPv4 Network Information:

    ISP : Joel Krause
    ASN : AS200912 Joel Krause
    Host : vpslayer.net
    Location : Amsterdam, North Holland (NH)
    Country : The Netherlands

    fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/sda1):

    Block Size 4k (IOPS) 64k (IOPS)
    Read 43.05 MB/s (10.5k) 111.81 MB/s (1.7k)
    Write 43.15 MB/s (10.5k) 112.40 MB/s (1.7k)
    Total 86.20 MB/s (21.0k) 224.22 MB/s (3.4k)
    Block Size 512k (IOPS) 1m (IOPS)
    ------ --- ---- ---- ----
    Read 178.62 MB/s (340) 171.29 MB/s (163)
    Write 188.11 MB/s (358) 182.69 MB/s (174)
    Total 366.74 MB/s (698) 353.99 MB/s (337)

    iperf3 Network Speed Tests (IPv4):

    Provider Location (Link) Send Speed Recv Speed Ping
    Clouvider London, UK (10G) 926 Mbits/sec 950 Mbits/sec 12.2 ms
    Eranium Amsterdam, NL (100G) 782 Mbits/sec 985 Mbits/sec 0.366 ms
    Uztelecom Tashkent, UZ (10G) 448 Mbits/sec 923 Mbits/sec 91.5 ms
    Leaseweb Singapore, SG (10G) 336 Mbits/sec 588 Mbits/sec --
    Clouvider Los Angeles, CA, US (10G) 313 Mbits/sec busy 131 ms
    Leaseweb NYC, NY, US (10G) 519 Mbits/sec 941 Mbits/sec 77.0 ms
    Edgoo Sao Paulo, BR (1G) 296 Mbits/sec 510 Mbits/sec 186 ms

    Geekbench test failed and low memory was detected. Add at least 1GB of SWAP or use GB4 instead (higher compatibility with low memory systems).

    YABS completed in 39 min 53 sec
    [/code]

    Thanked by 1VPSLAYER
  • let1 stillf out of stack

  • ScionerScioner Member
    edited September 23

    Was pleasantly surprised how responsive client area is.

    I'm used to wait some time after every action in like... every client area of every hoster.

    It's not the case there, all actions is almost instant. Good job.

    And both my VPS' works w/o any issues so far.

    Thanked by 1VPSLAYER
  • @jusnion said:
    let1 stillf out of stack

    i bought the last one today :D

  • VPSLAYERVPSLAYER Member, Patron Provider

    @jusnion said:
    let1 stillf out of stack

    Restocked

  • StarnbergStarnberg Member
    edited September 23

    How long does it take for a top-up via credit card to show in the account? Just topped up, got the feedback that it supposedly was successful, but the credit doesn't show.

  • @Starnberg said:
    How long does it take for a top-up via credit card to show in the account? Just topped up, got the feedback that it supposedly was successful, but the credit doesn't show.

    Topped up for me instantly, might just be a delay with your chosen payment method?

  • StarnbergStarnberg Member
    edited September 23

    Ok, something is off, then, because the portal told me the top-off via CC was successful, and my CC company also says there was a transaction...

    Oh, now I see: There were by now multiple transaction, correlating to my attempts, but all canceled but one, which is pending for whatever reason... :#

    @VPSLAYER, any suggestions?

  • Ok, finally got one payment through successfully. Hope the "pending" invoices will get canceled automatically...

  • VPSLAYERVPSLAYER Member, Patron Provider
    edited September 24

    @Starnberg said:
    Ok, finally got one payment through successfully. Hope the "pending" invoices will get canceled automatically...

    Yes, no worries🙏

  • Could you help on the ticket a80b7c3a-0922-4a8e-a1ea-eb9d0edd25c5, i have been waiting for a few days, even talked on tele chat...

  • Could you please restock the LET-2 offer?

  • stufentlystufently Member

    wtf where ubuntu 26.04

  • @stufently said:
    wtf where ubuntu 26.04

    Plenty of providers don't have Ubuntu 26.04 as an installable image. You can run a dist-upgrade from 24.04 without issue most of the time if having 26.04 is super important to you for some reason.

Sign In or Register to comment.