Comments

• monsoon73 Member

  September 21

  First

  Thanked by 1VPSLAYER
• rider Member

  September 21

  Second

  Thanked by 1VPSLAYER
• Raspi_dude Member

  September 21

  I genuinely thought this was another deluxhost post lmao, your logo and post title style are similar

  Thanked by 3hahahaa mrerenk VPSLAYER
• VPSLAYER Member, Patron Provider

  September 21

  @Raspi_dude said:
  I genuinely thought this was another deluxhost post lmao, your logo and post title style are similar

  i have a new logo for vpslayer but i just didnt updated it yet. I will do it soon
• rider Member

  September 21

  @Raspi_dude said:
  I genuinely thought this was another deluxhost post lmao, your logo and post title style are similar

  may be deluxhost clone
• Jayson888 Member

  September 21

  omg，delux？

  Thanked by 1monsoon73
• Toheebd Member

  September 21 edited September 21

  @rider said:

  @Raspi_dude said:
  I genuinely thought this was another deluxhost post lmao, your logo and post title style are similar

  may be deluxhost clone

  Exactly my thought too
• dreamfact Member

  September 21

  not first

  Thanked by 1monsoon73
• User59128 Member

  September 21

  Yabs?
• KeyGenMe Member

  September 21 edited September 21

  Grabbed a LET-1, setup was instant! Just wondering what the "Unlimited Fair Use" means in practice—is there a monthly soft-cap or a sustained bandwidth limit before getting throttled? Hope the node stays clean with low CPU steal, cheers!

  Any chance for a small early-bird bonus for the first orders (Invoice/Order #...)? 🙂
• luckystar888 Member

  September 21

  have an IP quality test screenshot?
• suut Member

  September 21

  Does Looking Glass not have IPv4?

  Thanked by 1zed
• mido Member

  September 21

  Unmetered Bandwidth / Traffic？
• bwgserver Member

  September 22

  After top up then i want to buy. but it show This plan is currently out of stock.. However, the page doesn't notify you that the item is out of stock; instead, it prompts you to top up your account first.Everyone needs to be vigilant.

  Thanked by 2funeego zhwandzcx
• SethB Member

  September 22

  I’m late😞
• hoperxu Member

  September 22 edited September 22

  I grabbed the LET-2 offer and I am currently extremely disappointed with the network speed and connectivity: connecting to the server experiences severe latency or outright times out, and bandwidth has peaked at only 1 Mbps.
  
  Which makes even a basic apt update run extraordinarily slow. The YABS benchmark has been running for over 30 minutes - binary downloads for fio and iperf3 failed to download completely, and waiting for the Geekbench 6 results feels endless. I really hope these network issues get resolved soon, but as of right now, I cannot recommend taking these offers.

  UPD: YABS

  curl -sL https://yabs.sh | bash
  # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
  #              Yet-Another-Bench-Script              #
  #                     v2026-09-20                    #
  # https://github.com/masonr/yet-another-bench-script #
  # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
  
  Tue Sep 22 00:58:40 UTC 2026
  
  Basic System Information:
  ---------------------------------
  Uptime     : 0 days, 0 hours, 15 minutes
  Processor  : Intel(R) Xeon(R) Gold 6122 CPU @ 1.80GHz
  CPU cores  : 1 @ 1795.776 MHz
  AES-NI     : ✔ Enabled
  VM-x/AMD-V : ✔ Enabled
  RAM        : 967.3 MiB
  Swap       : 0.0 KiB
  Disk       : 14.7 GiB
  Distro     : Debian GNU/Linux 13 (trixie)
  Kernel     : 6.12.48+deb13-amd64
  VM Type    : KVM
  IPv4/IPv6  : ✔ Online / ❌ Offline
  
  IPv6 Network Information:
  ---------------------------------
  ISP        : Joel Krause
  ASN        : AS200912 Joel Krause
  Host       : Joel Krause
  Location   : Amsterdam, North Holland (NH)
  Country    : The Netherlands
  
  Fio binary download failed. Running dd test as fallback....
  
  dd Sequential Disk Speed Tests:
  ---------------------------------
         | Test 1      | Test 2      | Test 3      | Avg        
         |             |             |             |            
  Write  | 386 MB/s    | 458 MB/s    | 426 MB/s    | 423.33 MB/s
  Read   | 487 MB/s    | 518 MB/s    | 515 MB/s    | 506.67 MB/s
  
  iperf3 binary download failed. Skipping iperf network tests...
  
  Geekbench test failed and low memory was detected. Add at least 1GB of SWAP or use GB4 instead (higher compatibility with low memory systems).
  
  YABS completed in 45 min 31 sec
  

  Thanked by 4SethB berndy2001 NFSC zhwandzcx
• chris477chormier Member

  September 22

  I remember seeing your recommendation on some offshore listing site.
  The trademark was marked “DMCA ignored”—is that true?
• VPSLAYER Member, Patron Provider

  September 22

  @Toheebd said:

  @rider said:

  @Raspi_dude said:
  I genuinely thought this was another deluxhost post lmao, your logo and post title style are similar

  may be deluxhost clone

  Exactly my thought too

  I dont have anything to do with them
• VPSLAYER Member, Patron Provider

  September 22

  @suut said:
  Does Looking Glass not have IPv4?

  It does, it’s just not shown there. Fixing it later
• Wooo Member

  September 22

  out of stock
• VPSLAYER Member, Patron Provider

  September 22

  We are working on the deployment issues and a restock!
  All pending vms will be deployed soon. No runtime get lost.
• q112664 Member

  September 22

  Is the DMCA strict? If it’s lenient, I’ll buy it.
• Void Member

  September 22

  @chris477chormier said:
  I remember seeing your recommendation on some offshore listing site.
  The trademark was marked “DMCA ignored”—is that true?

  @VPSLAYER interested to know this
• longxinglink Member

  September 22

  €6.99/Y Will they restock?
• mnwg Member

  September 22

  get LET-2 offer, same connectivity issue, Speedtest by Ookla

    Server: Eranium B.V. - Amsterdam (id: 13764)
       ISP: VPSLAYER
  

  Idle Latency: 0.48 ms (jitter: 0.05ms, low: 0.45ms, high: 0.57ms)
  Download: 0.98 Mbps (data used: 870.9 kB)
  3302.65 ms (jitter: 165.56ms, low: 1079.28ms, high: 4057.38ms)
• Tandoor Member

  September 22 edited September 22

  Debian12 install. LET-3 default first install. Also i cannot try to install any other linux. So this Vps is useless from start. Did make a ticket, but their ticket system dont show any ticket number. But can see ticket. Must say not good start.

  No OS templates found on Proxmox storage. Node 'ams01'. ryzehosting-pbs: ryzehosting-pbs: error fetching datastores - fingerprint '40:64:A0:7F:C4:4F:F4:5D:41:0B:89:48:F9:5D:76:0B:9B:84:12:C2:' not verified, abort! | ryzehosting-pbs-backup: ryzehosting-pbs-backup: error fetching datastores - fingerprint '80:0B:3A:60:BC:88:7D:91:D6:66:66:3E:A7:59:57:88:31:16:83:1A:6C:B0:F8:55:C6' not verified, abort!
• antcz Member

  September 22

  LET-1 is out of stock
• VPSLAYER Member, Patron Provider

  September 22

  @chris477chormier said:
  I remember seeing your recommendation on some offshore listing site.
  The trademark was marked “DMCA ignored”—is that true?

  yes

  Thanked by 6q112664 longxinglink Void chris477chormier KeyGenMe tof
• VPSLAYER Member, Patron Provider

  September 22

  @Wooo said:
  out of stock

  We are currently working on deployment issues and then working on a restock.
• VPSLAYER Member, Patron Provider

  September 22

  @mnwg said:
  get LET-2 offer, same connectivity issue, Speedtest by Ookla

    Server: Eranium B.V. - Amsterdam (id: 13764)
       ISP: VPSLAYER
  

  Idle Latency: 0.48 ms (jitter: 0.05ms, low: 0.45ms, high: 0.57ms)
  Download: 0.98 Mbps (data used: 870.9 kB)
  3302.65 ms (jitter: 165.56ms, low: 1079.28ms, high: 4057.38ms)

  The issue arose because the LET-2 plan was configured with a port speed of 1 Mbps in the system. This has now been changed. anyone currently on the 1 Mbps speed tier should please open a support ticket, and the speed will be updated immediately.