Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

Looking for cheap EU backup VPS (< €1.50/mo) for WireGuard + Reverse Proxy

Hi everyone,
I'm looking for a super cheap EU-based VPS to serve purely as a secondary/backup node for a failover setup.

My primary setup is hosted on Netcup, but I need a lightweight fallback routing path for my Home Assistant instance when Netcup experiences network issues.

Requirements:

Location: Europe (Germany, Netherlands, France, France/UK, etc.)

IPv4: Dedicated IPv4 required (IPv6 is a bonus)

Specs: Very low usage — 512 MB to 1 GB RAM, 1 vCPU, 10 GB SSD is more than enough

Use case: Running a lightweight WireGuard tunnel + Nginx Proxy Manager / Caddy for failover traffic only

Budget: ~€10 - €15 / year (around €1 - €1.50/mo max)

Thanks

Comments

  • Can you recommend something?

  • Skrime

  • NolimitHostNolimitHost Member, Patron Provider

    Hey! A bit over your budget but I will just leave the offer, if you're interested you can check it out :smile:

    Budget VPS - Special Offer
    - 1vCore
    - 1GB RAM
    - 10 GB NVMe
    - 1 IPv4 + IPv6 / 64
    - DDOS Protection + Firewall Manager included
    - 500Mbit/s Connection
    - 2TB Bandwidth

    Frankfurt, Germany
    €18.99/year

    Order Here!

    Liv from NolimitCloud

  • VPSLAYERVPSLAYER Member, Patron Provider

    Hi,

    I can offer a small VPS Plan, hosted in Amsterdam that should work well for your use case:

    KVM VPS 512MB

    1 vCPU
    512 MB RAM
    10 GB NVMe
    10 Gbps shared port
    €2.75/month (€33/year)
    KVM virtualization
    Dedicated IPv4 & IPv6 /64 Subnet included

    This should be more than enough for a lightweight WireGuard tunnel + Caddy/Nginx Proxy Manager used as a failover node.

    Test IPs:

    • 31.58.216.1
    • 5.83.143.1
    • 217.60.237.1

    The only downside is that it's above your €10–15/year target. If you're able to stretch the budget, this would be an option.

    https://vpslayer.net

  • NetCup Pico 1,50

  • @WhiteRoseG said:
    NetCup Pico 1,50

    That would be a good alternative if it was outside of netcup and didn't have outages like the main server.

  • SKRIMESKRIME Member, Patron Provider

    Hey @Michal212,

    Thanks for the mention @User59128.

    Our EPYC 1G is 1.49€/mo, so 17.88€ for the year. That's slightly over your 10 to 15€ target rather than inside it, but it's 1 core, 1 GB RAM, 10 GB NVMe in RAID 1, dedicated IPv4 plus an IPv6 /64, which covers your spec with room to spare.

    For a failover node the useful part is that there's no traffic allowance to run out mid-incident, and no counter to watch. WireGuard works out of the box, TUN/TAP enabled. Location is Eygelshoven, NL.

    If you want the IP to geolocate somewhere specific we can still do that on this plan, same as we discussed in August.

    Order: skri.me/epyc
    Test IPv4: 77.90.60.30 | Test IPv6: 2a09:3f00:3000::cafe

  • @SKRIME said:
    Hey @Michal212,

    Thanks for the mention @User59128.

    Our EPYC 1G is 1.49€/mo, so 17.88€ for the year. That's slightly over your 10 to 15€ target rather than inside it, but it's 1 core, 1 GB RAM, 10 GB NVMe in RAID 1, dedicated IPv4 plus an IPv6 /64, which covers your spec with room to spare.

    For a failover node the useful part is that there's no traffic allowance to run out mid-incident, and no counter to watch. WireGuard works out of the box, TUN/TAP enabled. Location is Eygelshoven, NL.

    If you want the IP to geolocate somewhere specific we can still do that on this plan, same as we discussed in August.

    Order: skri.me/epyc
    Test IPv4: 77.90.60.30 | Test IPv6: 2a09:3f00:3000::cafe

    Thanks

    Thanked by 1SKRIME
Sign In or Register to comment.