[Free] openworld.eu.org - Free IPv6 VPS

dxomg · 12:43AM

Approved by @jbiloh

So this basically a small project I'm trying to make, which involves making a custom management panel from scratch while also providing some free boxes for Devs & Students hopefully, please keep in consideration that this is not at all a professional thing, but rather more like an experimental hobby project that's operated on consumer hardware with no support or guarantees, this service could go down at any moment and uptime is a best effort.

How does it work?

You need a Discord account to log in. Logging in will automatically add you to the project's official Discord server, If you're at the 100 server limit on Discord it wont though.
7 Day renewal cycle, for you to keep your VPS you'll have to renew it every 7 days, if you don't then the VPS will get deleted.

Resource Management & Fair Use

There's a throttle system implemented, you have burst 100% of that vCore, but if there's a consistent 35%+ for 5minutes usage of the cpu it will get throttled automatically to 10% and will come back to normal if usage returns back to normal.
Network abuse is strictly forbidden, there's a Deep Packet Inspector in place that could suspend your machine at any time if it detects something naughty.
SMTP ports are Blocked

What you get

OS: Alpine 3.24, Debian 13, Ubuntu 26.04
1vCore (Could possibly be i7-4510U or i7-2600 it is chosen at random)
512MB ram
5GB Disk
x1 IPv6 Public IP (Route64) (Expect ~90ms)
x1 IPv4 NAT (Cloudflare WARP) (Expect ~44ms)
Network Speed: ~50Mbps (This may vary)
Bandwidth: 50GB/week, once you hit the limit it will throttle to 1mbps
Location: Honduras, maybe soon Canada thanks to a friend
Slots are limited

What data will be collected?:

Your IP address
Your Discord Username
Email address associated with the Discord account

Link: https://openworld.eu.org/

yoursunny · 1:08AM

@dxomg said:
7 Day renewal cycle, for you to keep your VPS you'll have to renew it every 7 days, if you don't then the VPS will get deleted.

Is there a way to renew via CLI?

dxomg · 1:11AM

@yoursunny said:

@dxomg said:
7 Day renewal cycle, for you to keep your VPS you'll have to renew it every 7 days, if you don't then the VPS will get deleted.

Is there a way to renew via CLI?

No, you will have to renew it always from the website, but I could implement that in the future

edmarhub · 1:18AM

No available servers in the selected location for this plan (location may be full or offline).

dxomg · 1:24AM

@edmarhub said:
No available servers in the selected location for this plan (location may be full or offline).

Try again, should be fine now

hkbbdx · 1:25AM

quangdz · 1:47AM

YABS:

# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2026-07-24                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Mon Aug 24 01:35:28 UTC 2026

Basic System Information:
---------------------------------
Uptime     : 1 days, 15 hours, 23 minutes
Processor  : Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz
CPU cores  : 1 @ 3092.814 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 512.0 MiB
Swap       : 512.0 MiB
Disk       : 4.8 GiB
Distro     : Ubuntu 26.04 LTS
Kernel     : 7.0.2-6-pve
VM Type    : LXC
IPv4/IPv6  : ✔ Online / ✔ Online

IPv6 Network Information:
---------------------------------
ISP        : Johannes Ernst
ASN        : AS212895 Johannes Ernst
Location   : Ashburn, Virginia (VA)
Country    : United States
Warning: Could not parse free space format for /: ''

fio Disk Speed Tests (Mixed R/W 50/50) (Partition /dev/mapper/pve-vm--103--disk--0):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 36.40 MB/s    (8.8k) | 58.03 MB/s     (885)
Write      | 36.51 MB/s    (8.9k) | 58.59 MB/s     (894)
Total      | 72.92 MB/s   (17.8k) | 116.63 MB/s   (1.7k)
           |                      |
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 93.01 MB/s     (177) | 54.45 MB/s      (51)
Write      | 97.96 MB/s     (186) | 58.24 MB/s      (55)
Total      | 190.98 MB/s    (363) | 112.70 MB/s    (106)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
-----           | -----                     | ----            | ----            | ----
Clouvider       | London, UK (10G)          | 12.5 Mbits/sec  | 52.0 Mbits/sec  | 154 ms
Eranium         | Amsterdam, NL (100G)      | 11.0 Mbits/sec  | 43.3 Mbits/sec  | 158 ms
Uztelecom       | Tashkent, UZ (10G)        | 11.3 Mbits/sec  | 14.3 Mbits/sec  | 255 ms
Leaseweb        | Singapore, SG (10G)       | 11.8 Mbits/sec  | 26.4 Mbits/sec  | 309 ms
Clouvider       | Los Angeles, CA, US (10G) | 12.6 Mbits/sec  | 15.9 Mbits/sec  | 119 ms
Leaseweb        | NYC, NY, US (10G)         | 11.8 Mbits/sec  | 16.0 Mbits/sec  | 81.4 ms
Edgoo           | Sao Paulo, BR (1G)        | 12.1 Mbits/sec  | 18.6 Mbits/sec  | 150 ms

iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
-----           | -----                     | ----            | ----            | ----
Clouvider       | London, UK (10G)          | 11.8 Mbits/sec  | 23.2 Mbits/sec  | 147 ms
Eranium         | Amsterdam, NL (100G)      | 11.7 Mbits/sec  | 79.3 Mbits/sec  | 159 ms
Uztelecom       | Tashkent, UZ (10G)        | 11.1 Mbits/sec  | 3.29 Mbits/sec  | 235 ms
Leaseweb        | Singapore, SG (10G)       | 6.61 Mbits/sec  | 35.7 Mbits/sec  | 303 ms
Clouvider       | Los Angeles, CA, US (10G) | 12.4 Mbits/sec  | 52.2 Mbits/sec  | 139 ms
Leaseweb        | NYC, NY, US (10G)         | 12.3 Mbits/sec  | 61.9 Mbits/sec  | 77.6 ms
Edgoo           | Sao Paulo, BR (1G)        | 11.2 Mbits/sec  | 22.9 Mbits/sec  | 202 ms

Geekbench test failed and low memory was detected. Add at least 1GB of SWAP or use GB4 instead (higher compatibility with low memory systems).

YABS completed in 10 min 44 sec

zed · 1:48AM

nothing about this sounds like a good idea but no doubt there'll be some fair drama out of it, good luck.

dxomg · 1:55AM

@zed said:
nothing about this sounds like a good idea but no doubt there'll be some fair drama out of it, good luck.

We'll see

Fubuki · 2:10AM

looks interesting, might as well try it ig

Fubuki · 2:11AM

nvm, im dumb. simple math

forest · 2:23AM

@dxomg said: You need a Discord account to log in.

Disgusting.

@dxomg said: There's a throttle system implemented, you have burst 100% of that vCore, but if there's a consistent 35%+ for 5minutes usage of the cpu it will get throttled automatically to 10% and will come back to normal if usage returns back to normal.

What happens if someone uses 20% CPU usually and, for 5 minutes, uses >35%? If you throttle it down to 10%, CPU usage will perpetually show 100% and will never "come back to normal". It would be better to throttle to 35%.

dxomg · 2:33AM

@dxomg said: There's a throttle system implemented, you have burst 100% of that vCore, but if there's a consistent 35%+ for 5minutes usage of the cpu it will get throttled automatically to 10% and will come back to normal if usage returns back to normal.

What happens if someone uses 20% CPU usually and, for 5 minutes, uses >35%? If you throttle it down to 10%, CPU usage will perpetually show 100% and will never "come back to normal". It would be better to throttle to 35%.

If you use 35% your 100% wont become that 35%, meaning that if you throttle to 10%, your cpu usage will show 10% out of 100%

Fubuki · 2:34AM

im not surprised that you can't even update the packages without being hard capped on the cpu to the point ssh breaks. does the server have 100% IOWAIT?

forest · 2:36AM

@dxomg said:

@dxomg said: There's a throttle system implemented, you have burst 100% of that vCore, but if there's a consistent 35%+ for 5minutes usage of the cpu it will get throttled automatically to 10% and will come back to normal if usage returns back to normal.

What happens if someone uses 20% CPU usually and, for 5 minutes, uses >35%? If you throttle it down to 10%, CPU usage will perpetually show 100% and will never "come back to normal". It would be better to throttle to 35%.

If you use 35% your 100% wont become that 35%, meaning that if you throttle to 10%, your cpu usage will show 10% out of 100%

And if someone uses 20% perpetually, they'll never be able to reset the throttle without manual intervention? That seems like it could cause a lot of users to get trapped in a constant throttle.

dxomg · 2:43AM

@forest said:

@dxomg said:

@dxomg said: There's a throttle system implemented, you have burst 100% of that vCore, but if there's a consistent 35%+ for 5minutes usage of the cpu it will get throttled automatically to 10% and will come back to normal if usage returns back to normal.

What happens if someone uses 20% CPU usually and, for 5 minutes, uses >35%? If you throttle it down to 10%, CPU usage will perpetually show 100% and will never "come back to normal". It would be better to throttle to 35%.

If you use 35% your 100% wont become that 35%, meaning that if you throttle to 10%, your cpu usage will show 10% out of 100%

And if someone uses 20% perpetually, they'll never be able to reset the throttle without manual intervention? That seems like it could cause a lot of users to get trapped in a constant throttle.

There's a decay window of 1min, so users dont stay on throttled state

dxomg · 3:18AM

Well stock is gone now

Howdy, Stranger!

Categories

In this Discussion

[Free] openworld.eu.org - Free IPv6 VPS

How does it work?

Resource Management & Fair Use

What you get

Comments

Howdy, Stranger!

Quick Links

Categories

In this Discussion

[Free] openworld.eu.org - Free IPv6 VPS

How does it work?

Resource Management & Fair Use

What you get

Comments