New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
CPUs full compatibility is not getting passed to VM because of QEMU config. They need to change CPU mode on the VM... Clock speed confirms it is 5218.
On that note, can we request to be switched from i440fx to Q35? Current Linux distros don't really need i440fx as default anymore...it's slowly getting depreciated.
model name : QEMU Virtual CPU version 2.5+
This is not OK.
Can you DM with your IP address so I can check your VPS settings?
Maybe my colleagues changed your IP address? I cannot find any VPS with IP address: 85.121.244.250
I got u
Hey, I have enabled host passthrough on your VPS.
We need to manually turn it off and on from the panel for the changes to take effect.
Tell me if I can do it, or you can do it yourself.
Now you should see Intel(R) Xeon(R) Gold 5218 CPU
IMPORTANT!
CPU MODEL
For everyone who bought servers on NY, HK, and NL, we forgot to activate host passthrough cpu flag, so you will see a standard QEMU CPU.
Now its solved. We set it up generally on the new servers.
You need to manually turn off and on the VPS from the panel.
After that, you will see the real CPU model. This will enable special CPU instruction that you might need.
If still shows qemu, get back to me or open a support ticket so we enabled it specifically for you VPS.
Yeah, sorry for that, we forgot to activate host passthrough cpu flag, so you will see a standard QEMU CPU.
Now its solved. We set it up generally on the new servers.
You need to manually turn off and on the VPS from the panel.
After that, you will see the real CPU model. This will enable special CPU instruction that you might need.
If still shows qemu, get back to me or open a support ticket so we enabled it specifically for you VPS.
P.S.: Let me check with my colleagues if switching an existing VPS from i440fx to Q35 is supported safely on our side. In general, Q35 makes sense for new Linux installations, but changing the machine type of an existing VM may require testing, because some operating systems can be sensitive to virtual hardware changes.
Thank you it works now
CPUinfo
redact@redact:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 85
model name : Intel(R) Xeon(R) Gold 5218 CPU @ 2.30GHz
stepping : 7
microcode : 0x5003901
cpu MHz : 2299.998
cache size : 22528 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 22
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology cpuid tsc_known_freq pni pclmulqdq vmx ssse3 fma cx16 pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch cpuid_fault ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves arat vnmi umip pku ospke avx512_vnni md_clear flush_l1d arch_capabilities
vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid shadow_vmcs pml tsc_scaling
bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs taa mmio_stale_data retbleed eibrs_pbrsb bhi ibpb_no_ret its
bogomips : 4599.99
clflush size : 64
cache_alignment : 64
address sizes : 46 bits physical, 48 bits virtual
power management:
Basic Sys Info from YABS
Basic System Information:
Uptime : 0 days, 0 hours, 2 minutes
Processor : Intel(R) Xeon(R) Gold 5218 CPU @ 2.30GHz
CPU cores : 1 @ 2299.998 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM : 967.4 MiB
Swap : 512.0 MiB
Disk : 19.6 GiB
Distro : Debian GNU/Linux 13 (trixie)
Kernel : 6.12.86+deb13-amd64
VM Type : KVM
IPv4/IPv6 : ✔ Online / ✔ Online
Thank you! I don't mind if it's destructive to VM itself
I still have old providers vm alive to migrate things over quickly.
Perfect, thanks for confirming.
Please DM me your server IP address and I’ll take a look.
To be honest, I’m not sure yet if our panel supports this option directly, or if we would need to manually edit the QEMU config file. No one has requested this before, so I’ll need to check it first.
Thank you for your order. You ordered servers in Asia and we are not offering bonuses there for this campaign.
I have added the extra BW.
Thank you for your order.
I have added the extra RAM. Thank you for your order!
You'll need to manually turn off and on your VPS from the panel.
Sent it over~
Hooray for being the testing dummy lol thanks for looking into it.
V4V-12992
Thanks for the offer.
I hope the offer will be restocked, so I can order another one in UK.
Hahaha
Thanks, we're looking into it.
Thanks for the order.
I have added the extra BW.
KVM 1G it's still available, I announced the restock yesterday or earlier today, I do not remember.
When are too many comments, is harder for everyone to see the other flash sales.
RESTOCKED .
Only 5 available!
RESTOCKED these as well.
Availability:
5x Advanced VPS
5x Elite VPS
2x Remaining...
I don't know how I could ever use more bandwidth after that amazing flash sale (THANK YOU!), but invoice #V4V-13192. Stay awesome!
Sorry, this was a joke.
Your first post mentioned
85.121.244.250as a test IP for Hong Kong, but the IP does not seem to respond to ICMP.Is it possible to have a test IP for Hong Kong?
EDIT: Is it also possible to ask for Alpine Linux to be added as an OS, I added it in the client area, but it is not appearing in the 'other' category as an option to install.
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 107
model name : QEMU Virtual CPU version 2.5+
stepping : 1
microcode : 0x1000065
cpu MHz : 2895.648
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx lm rep_good nopl cpuid extd_apicid tsc_known_freq pni cx16 x2apic hypervisor lahf_lm svm 3dnowprefetch vmmcall
bugs : fxsave_leak sysret_ss_attrs null_seg swapgs_fence amd_e400 spectre_v1 spectre_v2
bogomips : 5791.29
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management:
JP need fix
Hmm ... seems my colleagues changed it ?! I will check it on Monday. Until then, you can ping any IP from 85.121.244.0/24 or 85.121.51.0/24. We have other ranges as well.
Thank you for noticing it. Fixed it.
Sorry, forgot to reply to the EDIT.
We do not have alpine linux templates, but you can upload your own iso and install any OS you want.
If you have or you want multiple servers with the same OS, I can create a snapshot of your server and add it for you as a template.
Let me know if everything's alright now.
Looking for a JP deal with around 5 - 10 IPv4 Ips. Let me know what might be possible. Thanks
coupon doesn't work
Also can you please enable JP for this deal?