Looking for Dedicated Server Allowing High TCP Connection Load (Public Tracker)

Comments

• AvaHosting Member, Patron Provider

  April 19

  @sayyiku said:
  I want to create a post to find hosting providers that allow running a public tracker.

  The requirements are:

  At least 16 CPU cores (high-frequency preferred)
  32 GB RAM or more
  NVMe storage
  1 Gbps port with unmetered bandwidth

  Must support very high concurrent TCP connections

  mybe 60w tcp connect

  Hi

  Check our Dedicated Servers (you can customize)
  https://ava.hosting/dedicated-servers/

  We only have 5 Ryzen in Stock. We have other dedicated servers

  Check our AUP and rules.

  Kind Regards,
  Ava.hosting
• tentor Member, Host Rep

  April 19

  @sayyiku said:
  Must support very high concurrent TCP connections

  mybe 60w tcp connect

  I wonder why you mention this, did you have issues with some providers previously?
• concept Member

  April 19

  There are providers that can do this but budget does matter.
• TimboJones Member

  April 19

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Thanked by 3concept forest JohnnySac
• PacketsDecreaser Member, Patron Provider

  April 19 edited April 19

  Nvme Storage -> OK

  But how much ?
• alexhost Member, Patron Provider

  April 19

  @sayyiku said:
  I want to create a post to find hosting providers that allow running a public tracker.

  The requirements are:

  At least 16 CPU cores (high-frequency preferred)
  32 GB RAM or more
  NVMe storage
  1 Gbps port with unmetered bandwidth

  Must support very high concurrent TCP connections

  mybe 60w tcp connect

  Hi.

  We have own Datacenter, Hardware and Network in Republic of Moldova.

  We have cheap dedicated servers starting from 26€ per month
  https://alexhost.com/dedicated-servers/

  For NVMe not all have support for that, but you can see which dedicated servers offers NMVe for storage

  Also we have Bulgaria dedicated server and 10Gbps dedicated servers if required.
  The good news: All our dedicated servers can be customized like port speed, RAM, Disk Space and more! We also offer DDoS Protection and IPv6 FREE Support.

  We accept crypto payments and we just require a real and valid email address.

  Looking Glass: https://lg.alexhost.com

  Anything just open a ticket support.

  Best Regards,
  Alexhost
• sayyiku Member

  April 20

  @PacketsDecreaser said:
  Nvme Storage -> OK

  But how much ?

  480g nvme
• sayyiku Member

  April 20

  @tentor said:

  @sayyiku said:
  Must support very high concurrent TCP connections

  mybe 60w tcp connect

  I wonder why you mention this, did you have issues with some providers previously?

  There’s no issue or dissatisfaction—these are simply the performance requirements we need to meet. I believe most providers won’t allow this anyway, so it’s better to be upfront about the scale. It may increase further in the future.
• forest Member

  April 20

  @TimboJones said:

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Each TCP connection will use 60 watts. These are very heavy TCP connections. /s

  Thanked by 3rpqu Protocol903 TimboJones
• kenjing789 Member

  April 20

  @forest said:

  @TimboJones said:

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Each TCP connection will use 60 watts. These are very heavy TCP connections. /s

  i assume OP is Chinese, so it should be "wàn" (万/萬) which means "ten-thousand". So 60w is 600k concurrent connection
  Idk if one server can handle this much

  Thanked by 3JohnnySac forest tentor
• forest Member

  April 20

  @kenjing789 said:

  @forest said:

  @TimboJones said:

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Each TCP connection will use 60 watts. These are very heavy TCP connections. /s

  i assume OP is Chinese, so it should be "wàn" (万/萬) which means "ten-thousand". So 60w is 600k concurrent connection
  Idk if one server can handle this much

  One server can handle that assuming there are not too many open connections per client, but you'd have to raise nf_conntrack_max at the very least. It would use a lot of memory.
• rpqu Member

  April 20 edited April 20

  @kenjing789 said:

  @forest said:

  @TimboJones said:

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Each TCP connection will use 60 watts. These are very heavy TCP connections. /s

  i assume OP is Chinese, so it should be "wàn" (万/萬) which means "ten-thousand". So 60w is 600k concurrent connection
  Idk if one server can handle this much

  At that point, might as well require DDoS protection/filtering.
• sayyiku Member

  April 20 edited April 20

  @forest said:

  @kenjing789 said:

  @forest said:

  @TimboJones said:

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Each TCP connection will use 60 watts. These are very heavy TCP connections. /s

  i assume OP is Chinese, so it should be "wàn" (万/萬) which means "ten-thousand". So 60w is 600k concurrent connection
  Idk if one server can handle this much

  One server can handle that assuming there are not too many open connections per client, but you'd have to raise nf_conntrack_max at the very least. It would use a lot of memory.

  My server, with 16 cores and 32 GB of RAM, handled it perfectly well.

  Many providers would block such large TCP connections.

  Thanked by 1forest
• TimboJones Member

  April 20

  @forest said:

  @TimboJones said:

  @sayyiku said:
  mybe 60w tcp connect

  What?

  Each TCP connection will use 60 watts. These are very heavy TCP connections. /s

  Ah, they replaced the network activity LED with a light bulb.

  Thanked by 1JohnnySac