looking for a cheap vps to tunnel services

Comments

• zGato Member

  November 2025

  @HostDZire 100% recommend!!!!

  Thanked by 5oloke cainyxues stxsh HostDZire sh97
• alexhost Member, Patron Provider

  November 2025 edited November 2025

  @lavios said:
  my isp uses cgnat, and I currently tunnel traffic through oracle free tier ampere server but the speed is limited to ~50mbps. also I don't want to do kyc with gov id like hetzner.

  performance: good enough to run rathole, and caddy in docker/host
  my server location: India
  speed: 200Mbps min
  bandwidth: 2TB min
  budget: ~5USD (cheaper the better)

  thanks in advance!

  Hi,

  You can choose our VPS U1 Plan in Moldova for 4€ per month. We allow Caddy (reverse proxy etc)

  1vCore
  1.5GB RAM
  10GB NVMe Disk
  DDoS Protection
  Bandwidth "unmetered" (as long you don't disturb neighbors you're fine. 2TB seems fine)
  Price: 4€ per month ~ 4.61$ USD

  Check the VPS in Moldova Plans here:
  https://alexhost.com/vps/vps-europe/vps-moldova/

  Direct link:
  https://bill.alexhost.com/?cmd=module&module=111&cid=3059

  33% OFF BlackFriday, Coupon Code: BLACK33

  Anything just contact our support through ticket (best way), livechat, telegram.
  We don't ask for KYC if you pay with crypto!

  Best Regards,
  Alexhost
• matey0 Member

  November 2025

  @alexhost said: We allow Caddy

  Woah, be careful, or recordedfuture might list you in their next exposé
• aluy Member, Patron Provider

  November 2025

  2GB RAM
  1vCore
  10GB SSD
  10Gbit Fair-Use (2TB is absolute no issue)
  Locations: United Kingdom, Switzerland, Bulgaria and Netherlands

  €3.60EUR/mo excl. tax
• ccde Member

  November 2025

  Is the service in question an HTTP/S service without WebSockets? If it is, and you are okay with Cloudflare seeing the traffic, they will do it for free.

  Check out Cloudflare Tunnel.
• lavios Member

  November 2025 edited November 2025

  @ccde yeah, i could totally go for cloudflare tunnels but they terminate https at their end afaik. I want e2ee for my services. (services are mealie,plex,ente,jellyfin,nextcloud,custom nodejs apps etc)

  @zGato I tried hostdzire but iperf3 speeds are maxing out at like around ~100Mbps, my internet speed is like 250Mbps.

  [ ID] Interval           Transfer     Bitrate         Retr  Cwnd
  [  5]   0.00-1.00   sec  8.75 MBytes  73.3 Mbits/sec    4   2.83 KBytes
  [  5]   1.00-2.00   sec  25.9 MBytes   217 Mbits/sec  357   1.08 MBytes
  [  5]   2.00-3.00   sec  13.6 MBytes   114 Mbits/sec   14    423 KBytes
  [  5]   3.00-4.00   sec  11.0 MBytes  92.3 Mbits/sec    0    454 KBytes
  [  5]   4.00-5.00   sec  8.50 MBytes  71.3 Mbits/sec  253    236 KBytes
  [  5]   5.00-6.00   sec  5.50 MBytes  46.1 Mbits/sec    0    260 KBytes
  [  5]   6.00-7.00   sec  6.75 MBytes  56.6 Mbits/sec    0    273 KBytes
  [  5]   7.00-8.00   sec  7.00 MBytes  58.7 Mbits/sec    0    288 KBytes
  [  5]   8.00-9.00   sec  5.62 MBytes  47.2 Mbits/sec   53    150 KBytes
  [  5]   9.00-10.00  sec  4.12 MBytes  34.6 Mbits/sec    0    167 KBytes
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate         Retr
  [  5]   0.00-10.00  sec  96.8 MBytes  81.2 Mbits/sec  681            sender
  [  5]   0.00-10.04  sec  93.6 MBytes  78.2 Mbits/sec                  receiver
  
• ccde Member

  November 2025

  @lavios said: I want e2ee for my services. (services are mealie,plex,ente,jellyfin,nextcloud,custom nodejs apps etc)

  Based on what you listed, I assume you are running a Home Lab.
  While Cloudflare Tunnel terminates HTTP/S traffic in their network, they also claimed to support SSH forwarding. FWIW, if these are software applications you use yourself, serving them over SSH would provide E2EE.

  Not that I am familiar with this set up, tho.
  Anyway, good luck with the search.
• NexOasis Member, Host Rep

  November 2025

  Hi,

  Melbicom has VPS in Mumbai with the following specs:
  CPU 1 core
  RAM 2GB
  Storage 20GB
  Bandwidth up to 1 Gbps, monthly quota 2TB
  The price is €5,70 monthly.

  You can take a look here: https://www.melbicom.net/virtualserver/?utm_id=2025_BSTForum100
• tehdev Barred

  November 2025

  I'd go with @alexhost . they know their stuff and support is good.