Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop

Categories

In this Discussion

Home › Offers
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

DeluxHost.net | BLACK FRIDAY 2025 | NEW Storage VPS €1.49/m | Ryzen/EPYC NVMe VPS from 15€/y| NED/DE

1…34689…15

Comments

  • 0x25010x2501 Member

    @Homwer said:
    My W-3 says it's located in

    ISP : SCALEBLADE
    ASN : Unknown
    Location : London, England (ENG)
    Country : United Kingdom

    And not in Eygelshoven (Netherlands)
    Is is this a mistake? Can you move it?
    Bets regards

    Run a quick traceroute to your VPS then search the CIDR of the last host before your VPS (185.91.127.0/24 in my case) in https://bgp.tools, finally check the upstream. In my case, the upstream was "AS44592 - SkyLink Data Center BV" which is located in the Netherlands.

    Thanked by 1Homwer
  • wolpiwolpi Member

    @DeluxHost said:
    If we missed anyone, please let us know.

    You missed my post :'( - My order number is #5406528115 - 10GB of extra NVMe storage would be really nice... but I wouldn't say no to extra RAM or an 10G Port upgrade.

  • cz83scz83s Member

    Only € or and $?

  • NadweyNadwey Member

    Order ID: 8486273344

    Thanks ❤️

  • jndjnd Member

    @wolpi said:

    @DeluxHost said:
    If we missed anyone, please let us know.

    You missed my post :'( - My order number is #5406528115 - 10GB of extra NVMe storage would be really nice... but I wouldn't say no to extra RAM or an 10G Port upgrade.

    Chances are you already got the upgrade, check your control panel. I didn't get response in this thread but got upgraded anyways.

  • asuna42asuna42 Member
    edited November 2025

    Download speed and ping is much better over IPv6 (170M vs 60M and 17ms vs 46ms)
    Tested on Netcup NBG 2.5G VPS to lgams.deluxhost.net

  • DeluxHostDeluxHost Member, Patron Provider

    By tomorrow we aim to give away freebies to anyone who wrote down their order number. There are so many of you, thanks again for your orders. :)

  • DeluxHostDeluxHost Member, Patron Provider

    @DeluxHost said:
    And.. a new Offer Plan is here!

    📍 Skylink – Eygelshoven
    🛡 DDoS Protection: PletX
    🌐 IPv4 + IPv6 included

    RYZEN 9 9950X only for who want the real power o:)

    Plan vCPU RAM NVMe Port IPv4 IPv6 Prezzo/anno Order
    W-0 1 512 MB 8 GB 500 Mbps ❌ ✅ /64 5 €/yr Order
    W-1 1 1 GB 10 GB 1 Gbps ✅ ✅ /64 10 €/yr Order
    W-2 1 2 GB 20 GB 1 Gbps ✅ ✅ /64 16 €/yr Order
    W-3 2 4 GB 30 GB 10 Gbps ✅ ✅ /64 22 €/yr Order
    W-4 2 8 GB 40 GB 10 Gbps ✅ ✅ /64 34 €/yr Order
    W-5 3 16 GB 50 GB 10 Gbps ✅ ✅ /64 52 €/yr Order

    and I recommend you keep an eye on this offer 😉

  • faizfaizfaizfaiz Member

    @DeluxHost
    because vps re-create from Department Technical
    Order Number: 5180328185
    please add 10GB storage NVME
    Thank You

  • SomSom Member

    On the R-1 plan, Is the /64 prefix actually routed to my VPS?
    Trying to set up a VPN giving clients IPv6 on a /72 subnet, but that does not seem to work which makes me think if the prefix is just on-link?

  • lalofulalofu Member

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

  • hotsnowhotsnow Veteran

    @lalofu said:

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

    it does need, I've already made the test

    Thanked by 1lalofu
  • lalofulalofu Member

    @hotsnow said:

    @lalofu said:

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

    it does need, I've already made the test

    Thank you. I just want to confirm again: do I only need to click the restart button and no other action is required?

  • titustitus Member

    @lalofu said: hey，bro，storage has been restocked.

    Thank You so much for the mention. :) Ordered one successfully. Made my day happy.

  • hotsnowhotsnow Veteran

    @lalofu said:

    @hotsnow said:

    @lalofu said:

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

    it does need, I've already made the test

    Thank you. I just want to confirm again: do I only need to click the restart button and no other action is required?

    you can test it, I click the shutdown then boot :D

  • lalofulalofu Member

    @hotsnow said:

    @lalofu said:

    @hotsnow said:

    @lalofu said:

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

    it does need, I've already made the test

    Thank you. I just want to confirm again: do I only need to click the restart button and no other action is required?

    you can test it, I click the shutdown then boot :D

    haha，I just tried the restart, and now the internet speed has become even slower. The upload speed dropped from 20 mb/s to 10 mb/s.Thank you，I will try to click the shutdown then boot.

  • x1archx1arch Member
    edited November 2025

    @lalofu said:

    @hotsnow said:

    @lalofu said:

    @hotsnow said:

    @lalofu said:

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

    it does need, I've already made the test

    Thank you. I just want to confirm again: do I only need to click the restart button and no other action is required?

    you can test it, I click the shutdown then boot :D

    haha，I just tried the restart, and now the internet speed has become even slower. The upload speed dropped from 20 mb/s to 10 mb/s.Thank you，I will try to click the shutdown then boot.

    DE, I mean D-1?

  • totototototo Member

    @lalofu said:

    haha，I just tried the restart, and now the internet speed has become even slower. The upload speed dropped from 20 mb/s to 10 mb/s.Thank you，I will try to click the shutdown then boot.

    That will be resolved later as everyone is likely benchmarking their networks at the same time.

  • lalofulalofu Member
    edited November 2025

    @x1arch said:

    @lalofu said:

    @hotsnow said:

    @lalofu said:

    @hotsnow said:

    @lalofu said:

    @DeluxHost said:
    We've given freebies to everyone who requested them. If we missed anyone, please let us know. There are so many of you, so it's best to post a single message instead of writing one by one. The resources were randomized, but we'll always keep an eye on your requests.

    Everything always depends on availability.

    Thanks again!

    After the bandwidth is changed to a 10G port, do I need to restart the machine for the change to take effect?

    it does need, I've already made the test

    Thank you. I just want to confirm again: do I only need to click the restart button and no other action is required?

    you can test it, I click the shutdown then boot :D

    haha，I just tried the restart, and now the internet speed has become even slower. The upload speed dropped from 20 mb/s to 10 mb/s.Thank you，I will try to click the shutdown then boot.

    DE, I mean D-1?

    storage3 :D
    However, this is the internet speed for the application I am running. I just used Speedtest to check it, and the results are as follows:
    Hosted by edpnet Belgium BV (Brussels) [264.06 km]: 13.418 ms
    Testing download speed................................................................................
    Download: 2483.43 Mbit/s
    Testing upload speed......................................................................................................
    Upload: 796.87 Mbit/s
    I suspect the hard drive I/O is too slow, which is preventing my application's internet speed from getting faster.

    Thanked by 1x1arch
  • lalofulalofu Member

    @tototo said:

    @lalofu said:

    haha，I just tried the restart, and now the internet speed has become even slower. The upload speed dropped from 20 mb/s to 10 mb/s.Thank you，I will try to click the shutdown then boot.

    That will be resolved later as everyone is likely benchmarking their networks at the same time.

    I hope so.

  • nonocebnonoceb Member

    Order Number: 4118418305 - 7027109604
    Thanks for this W-0 deal!
    More ram is welcome B)

  • hanruhanru Member

    Order Number: 3052563571
    I would choose an extra 10GB NVMe storage or an exrta 1GB RAM. Thanks for the offer!

  • vpsmmvpsmm Member

    This is a notice that an invoice has been generated on Monday, November 24th, 2025.

    Your payment method is: PayPal

    Invoice #15217
    Amount Due: €1.99EUR
    Due Date: Monday, November 24th, 2025

    Invoice Items

    STORAGE-2 - Kirkrx7WmVCCxi2xcVPn.deluxhost.net (24/11/2025 - 23/12/2025) €1.99EUR

  • kingsnakerrrkingsnakerrr Member

    Order Number: 9487630410

  • vpsmmvpsmm Member

    fnnas is very nice. :D

  • ColderCoderColderCoder Member

    Order Placed #3654682181
    I would like 10G port upgrade or extra 1G RAM

  • kyroskohkyroskoh Member

    When K-1 (K Line) will get restocked?

  • nonocebnonoceb Member
    edited November 2025

    W-0 ipv6 only yabs

     Basic System Information:
 ---------------------------------
 Uptime     : 0 days, 0 hours, 44 minutes
 Processor  : AMD Ryzen 9 9950X 16-Core Processor
 CPU cores  : 1 @ 4291.936 MHz
 AES-NI     : ✔ Enabled
 VM-x/AMD-V : ✔ Enabled
 RAM        : 425.8 MiB
 Swap       : 0.9 GiB
 Disk       : 7.8 GiB
 Distro     : Debian GNU/Linux 13 (trixie)
 Kernel     : 6.12.57+deb13-amd64
 VM Type    : KVM
 IPv4/IPv6  : ❌ Offline / ✔ Online

 iperf3 Network Speed Tests (IPv6):
 ---------------------------------
 Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping           
 -----           | -----                     | ----            | ----            | ----           
 Clouvider       | London, UK (10G)          | 540 Mbits/sec   | 471 Mbits/sec   | 9.16 ms        
 Eranium         | Amsterdam, NL (100G)      | 544 Mbits/sec   | 471 Mbits/sec   | 3.36 ms        
 Uztelecom       | Tashkent, UZ (10G)        | 512 Mbits/sec   | 328 Mbits/sec   | 91.0 ms        
 Leaseweb        | Singapore, SG (10G)       | 486 Mbits/sec   | 366 Mbits/sec   | 158 ms         
 Clouvider       | Los Angeles, CA, US (10G) | busy            | 214 Mbits/sec   | 150 ms         
 Leaseweb        | NYC, NY, US (10G)         | 516 Mbits/sec   | 409 Mbits/sec   | 82.0 ms        
 Edgoo           | Sao Paulo, BR (1G)        | 459 Mbits/sec   | 87.0 Mbits/sec  | 185 ms
  • tacotuesdaytacotuesday Member

    Orders
    6773714417 and 5820935844

    Thanks

  • titustitus Member

    @DeluxHost
    First of all, Thx for the restock :)

    Order Number: 4953793477
    Invoice number: #15251
    I would be happy for +1GB RAM or +1x vCore if possible

Sign In or Register to comment.