Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!


New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

TRENDING NOW: RackNerd’s BLACK FRIDAY! NEW DEALS, NEW LOCATIONS, NEW HARDWARE + 100’s of GIVEAWAYS!

12112122142162171709

Comments

  • Hello, I would like to double my bandwidth.
    Invoice # 3801472993
    Thank you

  • @noob404 said:
    Has bchot left as well?

    no was watching final 2 fights, the headliners.. with utmost attention..

  • but i am leaving soon. i will make 5 callouts though first..

  • DO NOT BLINK AND DO NOW SWAY, UNTIL WE HAD A GIVE AWAY

  • GIVE ME CUP AND A FLASH SALE, VERY GOOD.. NO RHYME

  • @WHEN YOU WAITING FOR EVENT, DON'T FORGET - PUT UP A TENT

  • @noob404 said:

    @PuDLeZ said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    I guess I am alone yet again.

    I'm still lurking for the time being, setting up a new microsd for my summercart64 :)

    Oh good luck with that. BTW, are you planning on tinkering with that 3d before jb arrives. Maybe UART/serial and try to understand, how you could jailbreak it, for instance?

    Nah, I have a flash cart, no need for me to worry about it. As for applying it when it gets released, it all depends on what it enabled. I didn't JB my other analogue consoles/devices since it didn't add anything to my experience

    though I do enjoy uart-ing things, just won't be done on this thing since there's no need.

    Again, I was just being curious. Only recently did I get into UART and I have always been curious. Last month tried to UART an old dish TV box that I had lying around. Unfortunately, couldn't figure the points out completely. Don't have an oscillometer.

    Yeah, oscilloscopes make it easier but they're usually arranged in a certain patterns and you can use a generic multimeter to figure out the volatage and which is which.

  • ONCE YOU GIVE, WE WILL FORGIVE, WHEN WE GET, WE DON'T FORGET

  • JUST ONE OF THOSE CAPS CAN TURN THE ALL THE HEADS

  • COFFEE CUP OR TEA MUG, MAKE ME PROUD AND SMUG

  • @bchot said:

    @noob404 said:
    Has bchot left as well?

    no was watching final 2 fights, the headliners.. with utmost attention..

    Oh, carry on!

  • @bchot said:
    but i am leaving soon. i will make 5 callouts though first..

    Thank you for your service!

  • WE HYPE UP AND WE RECEIVE GIVEAWAY BY @dustinc

  • DO NOT BLINK AND DO NOW SWAY, UNTIL WE HAVE A GIVE AWAY

  • @bchot said:
    @WHEN YOU WAITING FOR EVENT, DON'T FORGET - PUT UP A TENT

    not @!

  • THAT'S 7 now.. i cannot leave it until round number. and so...

  • @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    I guess I am alone yet again.

    I'm still lurking for the time being, setting up a new microsd for my summercart64 :)

    Oh good luck with that. BTW, are you planning on tinkering with that 3d before jb arrives. Maybe UART/serial and try to understand, how you could jailbreak it, for instance?

    Nah, I have a flash cart, no need for me to worry about it. As for applying it when it gets released, it all depends on what it enabled. I didn't JB my other analogue consoles/devices since it didn't add anything to my experience

    though I do enjoy uart-ing things, just won't be done on this thing since there's no need.

    Again, I was just being curious. Only recently did I get into UART and I have always been curious. Last month tried to UART an old dish TV box that I had lying around. Unfortunately, couldn't figure the points out completely. Don't have an oscillometer.

    Yeah, oscilloscopes make it easier but they're usually arranged in a certain patterns and you can use a generic multimeter to figure out the volatage and which is which.

    I have tried that as well, but, an oscilloscope becomes almost a necessity when you have to figure out the baud rate. Most are standard, but, at times, you come across some devices which have a custom baud rate. Any workarounds for that?

  • @bchot said:
    THAT'S 7 now.. i cannot leave it until round number. and so...

    Make it to 10 or 20 maybe!

  • DOES IT WORK WHEN WE HYPE UP? YES JUST CHECK MY RACKNERD CUP 🍺🍺🍺

  • NOISE IS WHAT THEY NEED, GIVEAWAYS ARE WHAT WE NEED!

    Very shitty attempt, I know.

    Thanked by 1bchot
  • @bchot said:

    DOES IT WORK WHEN WE HYPE UP? YES JUST CHECK MY RACKNERD CUP 🍺🍺🍺

    How do you come up with these? So cool!

  • FOR A GOOD FLASH DEAL TONIGHT, I WILL HYPE UP WITH ALL MIGHT

  • @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    I guess I am alone yet again.

    I'm still lurking for the time being, setting up a new microsd for my summercart64 :)

    Oh good luck with that. BTW, are you planning on tinkering with that 3d before jb arrives. Maybe UART/serial and try to understand, how you could jailbreak it, for instance?

    Nah, I have a flash cart, no need for me to worry about it. As for applying it when it gets released, it all depends on what it enabled. I didn't JB my other analogue consoles/devices since it didn't add anything to my experience

    I see. I don't know why I have a sudden urge to JB everything I own as soon as there is one, even though, I don't use them for the purpose they are meant for :lol:

    hehe, I was that way, even when I didn't gain anything from it. I would do it just to do it! Though now, I kind of look at "what do I gain" and if it's basically nothing, I don't do it.

  • MUG, TSHIRT AND SWEET BACK PACK I WILL HANG ON MY WALL RACK

  • that's all, folks...

  • @noob404 said:

    NOISE IS WHAT THEY NEED, GIVEAWAYS ARE WHAT WE NEED!

    Very shitty attempt, I know.

    could have used "HEED"

  • @noob404 said:

    @bchot said:

    DOES IT WORK WHEN WE HYPE UP? YES JUST CHECK MY RACKNERD CUP 🍺🍺🍺

    How do you come up with these? So cool!

    i just feel it in my soul.. then i spit the rhymes while the iron is still hot..

  • @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:

    @PuDLeZ said:

    @noob404 said:
    I guess I am alone yet again.

    I'm still lurking for the time being, setting up a new microsd for my summercart64 :)

    Oh good luck with that. BTW, are you planning on tinkering with that 3d before jb arrives. Maybe UART/serial and try to understand, how you could jailbreak it, for instance?

    Nah, I have a flash cart, no need for me to worry about it. As for applying it when it gets released, it all depends on what it enabled. I didn't JB my other analogue consoles/devices since it didn't add anything to my experience

    I see. I don't know why I have a sudden urge to JB everything I own as soon as there is one, even though, I don't use them for the purpose they are meant for :lol:

    hehe, I was that way, even when I didn't gain anything from it. I would do it just to do it! Though now, I kind of look at "what do I gain" and if it's basically nothing, I don't do it.

    Wish to reach that stage someday. But, my curious mind doesn't let me.

  • @bchot said:

    @noob404 said:

    NOISE IS WHAT THEY NEED, GIVEAWAYS ARE WHAT WE NEED!

    Very shitty attempt, I know.

    could have used "HEED"

    Missed opportunity. Thanks for the pointers.

  • WE DO THE NOISE, THEY GIVE THE TOYS

Sign In or Register to comment.