New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
I've been using it for almost four months, very stable so far and the heat dissipation is visibly good even under high load. Also, if you have customers in China, the direct connection with China Unicom is great, but it would be even better if there were direct connections with China Mobile and China Telecom. (If possible, it would also be fine to have China Mobile and China Telecom route through China Unicom directly.)
The suspense is killing me...
Back in stock:
Intel Xeon W-1250 (6 Cores / 12 Threads) – $89/mo <--- INSTANT
64GB RAM
960GB NVMe
4 x 24TB HDD
iGPU Enabled
1Gbps Unmetered
/30 IPv4
📍 Datacenter: Ogden, Utah
COUPON: LET_OGD_96TB
👉 Deploy Now
**One per account right now
Also, remaining stock on single EPYC 7402 and 7502 has been price dropped once again:
AMD EPYC 7402 (24 Cores / 48 Threads) – $79/mo <--- INSTANT
128GB DDR4 RAM
1.92TB NVMe
1Gbps Unmetered Port
/30 IPv4
📍 Datacenter: Ogden, Utah
Coupon LET_7402128
👉 Deploy Now
AMD EPYC 7502 (32 Cores / 64 Threads) – $99/mo <--- INSTANT
256GB DDR4 RAM
2 x 1.92TB NVMe
1Gbps Unmetered Port
/30 IPv4
📍 Datacenter: Ogden, Utah
COUPON: LET_7502256
👉 Deploy Now
@GorillaServers Is 10Gbps port speed possible with limited bandwidth like 50-100TB for this server?
It's possible, in general and not necessarily on GorillaServers, to use 1, 2, 3 or all 4 IPs, with increasingly difficult configuration. For 1.1.1.0/30 for example, normally 1.1.1.1 is used for the gateway and 1.1.1.2 for the server. But 1.1.1.0 has not been relevant for a long time and probably just works. 1.1.1.3 is the broadcast, which can be used as a normal address if you disable broadcast on both the gateway and the server, which is non-standard. And if you can use an unnumbered interface which borrows from a different interface, or you can use IPv6 next hop, then you don't need a gateway address, so all 4 addresses are available to the server.
Dual 7502 now in stock in Utah for $159 instant deploy
Dual AMD EPYC 7502 (64 Cores / 128 Threads)
512GB DDR4 ECC RAM
2 x 3.84TB NVMe
1Gbps Unmetered Port
/29 IPv4
Datacenter - Ogden, Utah
Coupon: 2X7502_159
Deploy Now
Wasn’t this server $159 regular now it’s $199 with coupon 159
> @GorillaServers said:
Awesome!
maxmind error ?
no, that was the 7402 with 2x2TB SSD and $159 was the sale price.
Correct this is a higher core, higher spec'd model in utah.
The first batch sold out, another batch is being loaded in now.
wow
@GorillaServers Any comment on this?
Unfortunately that specific single 7502 promo can't do 10G. These are built in special nodes on 1G unmetered only. Something can be done custom but pricing would be different on a single standalone unit.
even the non-dual 7502 is a nice one..... did @GorillaServers figure out how to clone the HW? time travel? or some USA military surplus (5 full trains with server HW) auction? nice deals!!
All credit due to our many hard working techs keeping the server builds flowing
Does it support BGP or BOYIP? If not supported, what is the price per /24
There are prerequisites / caveats to this. So some of this is possible but you would need to email sales directly. If you have a ticket # feel free to DM it here
Reloaded stock:
Dual AMD EPYC 7551 (64 Cores / 128 Threads) <--- $149 Instant Deploy
512GB DDR4 ECC RAM
1 x 4TB NVMe
1Gbps Unmetered Port
/29 IPv4
Instant Deploy
Coupon: LET_7551_149
Also returning stock in LA:
Dual AMD EPYC 7402 (48 Cores / 96 Threads) <--- $159 Instant Deploy
512GB DDR4 ECC RAM
2 x 240GB SSD
2 x 1.92TB NVMe
1Gbps Unmetered
/29 IPv4
Instant Deploy
Coupon: LET_LA7402_159
Very good, give it a try
Why is there no renewal bill?
Not sure what you mean exactly. Are you a client? If you have a ticket # please message it to us. Thanks!
Can I add a graphics card？
Is there a GPU option? Doesn't have to be a fancy GPU, I just need to render bounding boxes on video streams.
Those EPYC promos can't do GPUs, but we can provision them custom. Email sales to open a ticket with your exact HW wants and we'll get you set up.
Any GPU dedi promo for LET?
yay for giveaway
We're building up a lower end GPU promo config right now, and should restock some of the higher end ones shortly as well. What kind of GPU(s) are you looking for mostly?
I could be fine with a RTX4000 to get the job done.
How much is expected?