New on LowEndTalk? Please Register and read our Community Rules.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.
Comments
Congrats to the winners
Oh shit my first legit giveaway win on here, thanks @Shakib
i checked and i kinda entered by mistake
money/credit is nice, but have 0 services and CURRENTLY not looking for services in the US (Salt lake city, Utah)
please give away my credits or put it powards next giveaway/deal whatever
dont need them to sit idle
p.s. should i need something, will probably slide into dm's (or your livechat
)
I really appreciate it! I'll use the credit for my next renewal. ❤️ Thank you for providing affordable and stable VPS! 👊
Almost everything is out of stock regarding VPSs... any ETA for the migration?
@Shakib I would like to get that giveaway credit ,if possible
.
Also , do you offer shared hosting ?
We are just not selling new VPS right now.
I will have to find some free time to do the migrations.
Can transfer bonus credits?
Thank you
If someone who already won the giveaway gives me your email, I will credit the giveaway amount to your HostCram account.
We do sell shared hosting.
Things are slow but we are definitely going in the right direction.
offering some nice $7/y dealz is not
P.S. Lookin Fatastikkkkk
No more unsustainable deals.
I mean ok after you gimme and my broz some 🤌
Don't buy any products from this company. After a few months of buying their VPS, they will secretly limit the speed to 100Mbps, even though your usage is very small. I spent $360 to buy their highest configuration for 3 years, and after 6 months, my speed was limited to 100mbps, even though my usage is less than 100GB per month. I should be a premium customer. I don't understand why they do this.
To Fiberstate LAX Looking Glass
iperf3 -4 -c 38.92.27.242 -p 5201 -P 1
Connecting to host 38.92.27.242, port 5201
[ 5] local 23.166.40.163 port 59338 connected to 38.92.27.242 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 29.8 MBytes 249 Mbits/sec
[ 5] 1.00-2.00 sec 17.2 MBytes 145 Mbits/sec
[ 5] 2.00-3.00 sec 11.1 MBytes 93.3 Mbits/sec
[ 5] 3.00-4.00 sec 9.38 MBytes 78.7 Mbits/sec
[ 5] 4.00-5.00 sec 13.0 MBytes 109 Mbits/sec
[ 5] 5.00-6.00 sec 11.4 MBytes 95.5 Mbits/sec
[ 5] 6.00-7.00 sec 7.12 MBytes 59.7 Mbits/sec
[ 5] 7.00-8.00 sec 10.9 MBytes 91.3 Mbits/sec
[ 5] 8.00-9.00 sec 14.8 MBytes 124 Mbits/sec
[ 5] 9.00-10.00 sec 18.2 MBytes 153 Mbits/sec
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 143 MBytes 120 Mbits/sec sender
[ 5] 0.00-10.06 sec 141 MBytes 118 Mbits/sec receiver
iperf Done.
To OVH BHS bhs.proof.ovh.ca
iperf3 -4 -c bhs.proof.ovh.ca -p 5205 -P 1
Connecting to host bhs.proof.ovh.ca, port 5205
[ 5] local 23.166.40.163 port 59396 connected to 51.222.154.207 port 5205
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.02 sec 7.62 MBytes 63.0 Mbits/sec
[ 5] 1.02-2.01 sec 6.00 MBytes 50.4 Mbits/sec
[ 5] 2.01-3.01 sec 3.12 MBytes 26.2 Mbits/sec
[ 5] 3.01-4.02 sec 3.25 MBytes 27.2 Mbits/sec
[ 5] 4.02-5.00 sec 3.62 MBytes 30.9 Mbits/sec
[ 5] 5.00-6.01 sec 3.00 MBytes 24.8 Mbits/sec
[ 5] 6.01-7.02 sec 2.62 MBytes 22.0 Mbits/sec
[ 5] 7.02-8.01 sec 3.12 MBytes 26.2 Mbits/sec
[ 5] 8.01-9.01 sec 3.00 MBytes 25.2 Mbits/sec
[ 5] 9.01-10.02 sec 3.12 MBytes 26.2 Mbits/sec
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.02 sec 38.5 MBytes 32.2 Mbits/sec sender
[ 5] 0.00-10.07 sec 36.8 MBytes 30.6 Mbits/sec receiver
After sending the work order, the attitude is still perfunctory and evasive, blaming the problem on the customer. Upon retesting, the speed is still limited to 100 Mbps.
They use a Fiberstate data center，so
To Fiberstate LAX Looking Glass
iperf3 -4 -c 38.92.27.242 -p 5201 -P 1
Connecting to host 38.92.27.242, port 5201
[ 5] local 23.166.40.163 port 59083 connected to 38.92.27.242 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 27.5 MBytes 230 Mbits/sec
[ 5] 1.00-2.00 sec 10.8 MBytes 90.2 Mbits/sec
[ 5] 2.00-3.00 sec 7.12 MBytes 59.8 Mbits/sec
[ 5] 3.00-4.00 sec 8.88 MBytes 74.4 Mbits/sec
[ 5] 4.00-5.00 sec 10.6 MBytes 89.1 Mbits/sec
[ 5] 5.00-6.00 sec 11.0 MBytes 92.3 Mbits/sec
[ 5] 6.00-7.00 sec 11.9 MBytes 99.6 Mbits/sec
[ 5] 7.00-8.00 sec 8.50 MBytes 71.3 Mbits/sec
[ 5] 8.00-9.00 sec 8.50 MBytes 71.3 Mbits/sec
[ 5] 9.00-10.00 sec 12.2 MBytes 103 Mbits/sec
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 117 MBytes 98.1 Mbits/sec sender
[ 5] 0.00-10.05 sec 115 MBytes 96.3 Mbits/sec receiver
iperf Done.
As I have tried to explain in support ticket,
We don't limit anyone. We have a huge bandwidth pool, there is simply no reason for us to limit. (Only the truth)
It could be the server you're connecting to is slow or the route itself is congested.
I am still looking into your support request. There was simply no reason to post here after only one response as your ticket is still pending, we are expecting to get it resolved.
It's an operating system limitation, sorry.
As per further investgations, it seems that you're running a unsupported version of Windows with improper network drivers. Also, you're out of RAM.
Solutions: Let me help you patch it up or Let me reinstall a known working version of Windows with proper drivers.
Just wondering, what is the poing of posting all this crap here instead of dealing over ticket?!
It was an operating system limitation. Sorry. After switching back to CentOS, the speed returned to normal. I'm very sorry for my inappropriate remarks. HostCram LLC is a trustworthy company.
[root@localhost ~]# iperf3 -4 -c 38.92.27.242 -p 5201 -P 1 -R
Connecting to host 38.92.27.242, port 5201
Reverse mode, remote host 38.92.27.242 is sending
[ 5] local 23.166.40.163 port 51290 connected to 38.92.27.242 port 5201
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 282 MBytes 2.37 Gbits/sec
[ 5] 1.00-2.00 sec 308 MBytes 2.59 Gbits/sec
[ 5] 2.00-3.00 sec 308 MBytes 2.59 Gbits/sec
^C[ 5] 3.00-3.01 sec 2.00 MBytes 2.51 Gbits/sec
[ ID] Interval Transfer Bitrate
[ 5] 0.00-3.01 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-3.01 sec 901 MBytes 2.51 Gbits/sec receiver
iperf3: interrupt - the client has terminated
[root@localhost ~]# iperf3 -4 -c 38.92.27.242 -p 5201 -P 1
Connecting to host 38.92.27.242, port 5201
[ 5] local 23.166.40.163 port 38948 connected to 38.92.27.242 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 224 MBytes 1.88 Gbits/sec 28 5.27 MBytes
[ 5] 1.00-2.00 sec 204 MBytes 1.71 Gbits/sec 53 2.73 MBytes
[ 5] 2.00-3.00 sec 199 MBytes 1.67 Gbits/sec 0 2.86 MBytes
[ 5] 3.00-4.00 sec 205 MBytes 1.72 Gbits/sec 0 2.97 MBytes
[ 5] 4.00-5.00 sec 148 MBytes 1.24 Gbits/sec 62 1.53 MBytes
[ 5] 5.00-6.00 sec 110 MBytes 923 Mbits/sec 0 1.62 MBytes
[ 5] 6.00-7.00 sec 115 MBytes 965 Mbits/sec 0 1.68 MBytes
^C[ 5] 7.00-7.56 sec 67.5 MBytes 1.01 Gbits/sec 0 1.71 MBytes
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-7.56 sec 1.24 GBytes 1.41 Gbits/sec 143 sender
[ 5] 0.00-7.56 sec 0.00 Bytes 0.00 bits/sec receiver
This issue on your Windows can be resolved with proper virtio drivers.
As much as I enjoy MJJs mjjing, its nice to see your office grow!
I have one (1) stock quantity of the special 9900X Liquid Cooled VM deal available.
Contact me if anyone wants to make a long term (3 years or more) deal with me. I have limited RAM on this node but plenty of CPU and storage space is available.