Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Quick Links


Shells Virtual Desktop
BMail.ag - Secure Email Service
Server.net
CPLicense.net
VPS Server
Buy VPN
Vultr
VMs for AI
HostDare
HostDare
ReliableSite White-Label Dedicated Hosting for Resellers
InterServer VPS
BMail.ag - Secure Email Service
Best VPN
High-Performance Bare Metal Server Solutions
Karvl.com
Server Mania Cloud Hosting
DataWagon Hosting
AlphaVPS Hosting
Evoxt.com
Clouvider
VPS Hosting with NVMe
Residential IPs in the US & 4G Mobile Proxies in EU & US with Unlimited Bandwidth
ReliableSite White-Label Dedicated Hosting for Resellers
Rabisu - Hosting Solutions
Shells Virtual Desktop

Categories

In this Discussion

Home › Offers
New on LowEndTalk? Please Register and read our Community Rules.

All new Registrations are manually reviewed and approved, so a short delay after registration may occur before your account becomes active.

GorillaServers Spices Things Up - The Fall Server Event Begins + Free Stuff

124678

Comments

  • lowenddevlowenddev Member

    in for the giveaway.

  • tomcbtomcb Member

    GLWS <3

  • TrKTrK Member

    Gorilla 🦍 servers

  • onessmeonessme Member

    Fraud Check :'(

  • MoonMusicStoneMoonMusicStone Member

    GLWS :)

  • muffinmuffin Member

    🦍

  • mrclownmrclown Member

    Very good deals.

  • star111star111 Member

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    root@104-250-140-202:~# sudo intel_gpu_top
    No device filter specified and no discrete/integrated i915 devices found
    root@104-250-140-202:~# sudo clinfo
    Number of platforms 0

    ICD loader properties
    ICD loader Name OpenCL ICD Loader
    ICD loader Vendor OCL Icd free software
    ICD loader Version 2.3.2
    ICD loader Profile OpenCL 3.0
    root@104-250-140-202:~# sudo lshw -C display
    *-display
    description: VGA compatible controller
    product: ASPEED Graphics Family
    vendor: ASPEED Technology, Inc.
    physical id: 0
    bus info: pci@0000:06:00.0
    logical name: /dev/fb0
    version: 41
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi vga_controller cap_list rom fb
    configuration: depth=32 driver=ast latency=0 resolution=1024,768
    resources: irq:16 memory:a0000000-a0ffffff memory:a1000000-a101ffff ioport:5000(size=128) memory:c0000-dffff

    The primary reason for buying the server was the iGPU, so please enable the iGPU.

    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)
    Attaching disk RAID details below-

    lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
    sda 8:0 0 25.5T 0 disk
    ├─sda1 8:1 0 550M 0 part /boot/efi
    ├─sda2 8:2 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sda3 8:3 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sdb 8:16 0 25.5T 0 disk
    ├─sdb1 8:17 0 550M 0 part
    ├─sdb2 8:18 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sdb3 8:19 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sdc 8:32 0 25.5T 0 disk
    ├─sdc1 8:33 0 550M 0 part
    ├─sdc2 8:34 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sdc3 8:35 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sdd 8:48 0 25.5T 0 disk
    ├─sdd1 8:49 0 550M 0 part
    ├─sdd2 8:50 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sdd3 8:51 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sr0 11:0 1 1024M 0 rom
    nvme0n1 259:0 0 894.3G 0 disk
    ├─nvme0n1p1 259:1 0 550M 0 part
    ├─nvme0n1p2 259:2 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─nvme0n1p3 259:3 0 892.7G 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    root@104-250-140-202:~# df -h
    Filesystem Size Used Avail Use% Mounted on
    tmpfs 6.3G 1.5M 6.3G 1% /run
    efivarfs 192K 36K 152K 19% /sys/firmware/efi/efivars
    /dev/mapper/vg0-root 1.8T 4.5G 1.7T 1% /
    tmpfs 32G 0 32G 0% /dev/shm
    tmpfs 5.0M 0 5.0M 0% /run/lock
    /dev/md127 988M 196M 726M 22% /boot
    /dev/sda1 549M 6.2M 543M 2% /boot/efi
    tmpfs 6.3G 12K 6.3G 1% /run/user/0

    Same situation, has your problem been solved?

  • bdlbdl Member

    Never thought I'd see a Gorilla drinking a PSL today :D

    Thanked by 1GorillaServers
  • macgowmacgow Member
    edited September 2025

    I'm here

  • linbei111linbei111 Member

    good offers!

  • cainyxuescainyxues Member

  • DetruireDetruire Member

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    It appears to be disabled on my $99 server from the last sale too. :#

    @bh4tech said:
    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)

    There's an "install on smallest disk" option in the control panel, under Reinstallation > Configure System > Select disk layout.

  • sayyikusayyiku Member

    GLWS :)

  • star111star111 Member

    @Detruire said:

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    It appears to be disabled on my $99 server from the last sale too. :#

    @bh4tech said:
    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)

    There's an "install on smallest disk" option in the control panel, under Reinstallation > Configure System > Select disk layout.

    The option Select disk layout was not found.

  • DetruireDetruire Member

    @star111 said:

    @Detruire said:

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    It appears to be disabled on my $99 server from the last sale too. :#

    @bh4tech said:
    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)

    There's an "install on smallest disk" option in the control panel, under Reinstallation > Configure System > Select disk layout.

    The option Select disk layout was not found.

  • star111star111 Member

    @Detruire said:

    @star111 said:

    @Detruire said:

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    It appears to be disabled on my $99 server from the last sale too. :#

    @bh4tech said:
    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)

    There's an "install on smallest disk" option in the control panel, under Reinstallation > Configure System > Select disk layout.

    The option Select disk layout was not found.

    I see. Thanks

  • VoidVoid Member

    Nice offers. I wish I were rich enough to buy a few and idle them.

  • bh4techbh4tech Member

    @zakkuuno said:

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    root@104-250-140-202:~# sudo intel_gpu_top
    No device filter specified and no discrete/integrated i915 devices found
    root@104-250-140-202:~# sudo clinfo
    Number of platforms 0

    ICD loader properties
    ICD loader Name OpenCL ICD Loader
    ICD loader Vendor OCL Icd free software
    ICD loader Version 2.3.2
    ICD loader Profile OpenCL 3.0
    root@104-250-140-202:~# sudo lshw -C display
    *-display
    description: VGA compatible controller
    product: ASPEED Graphics Family
    vendor: ASPEED Technology, Inc.
    physical id: 0
    bus info: pci@0000:06:00.0
    logical name: /dev/fb0
    version: 41
    width: 32 bits
    clock: 33MHz
    capabilities: pm msi vga_controller cap_list rom fb
    configuration: depth=32 driver=ast latency=0 resolution=1024,768
    resources: irq:16 memory:a0000000-a0ffffff memory:a1000000-a101ffff ioport:5000(size=128) memory:c0000-dffff

    The primary reason for buying the server was the iGPU, so please enable the iGPU.

    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)
    Attaching disk RAID details below-

    lsblk
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
    sda 8:0 0 25.5T 0 disk
    ├─sda1 8:1 0 550M 0 part /boot/efi
    ├─sda2 8:2 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sda3 8:3 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sdb 8:16 0 25.5T 0 disk
    ├─sdb1 8:17 0 550M 0 part
    ├─sdb2 8:18 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sdb3 8:19 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sdc 8:32 0 25.5T 0 disk
    ├─sdc1 8:33 0 550M 0 part
    ├─sdc2 8:34 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sdc3 8:35 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sdd 8:48 0 25.5T 0 disk
    ├─sdd1 8:49 0 550M 0 part
    ├─sdd2 8:50 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─sdd3 8:51 0 25.5T 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    sr0 11:0 1 1024M 0 rom
    nvme0n1 259:0 0 894.3G 0 disk
    ├─nvme0n1p1 259:1 0 550M 0 part
    ├─nvme0n1p2 259:2 0 1G 0 part
    │ └─md127 9:127 0 1022M 0 raid1 /boot
    └─nvme0n1p3 259:3 0 892.7G 0 part
    └─md126 9:126 0 1.7T 0 raid10
    ├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
    └─vg0-root 252:1 0 1.7T 0 lvm /
    root@104-250-140-202:~# df -h
    Filesystem Size Used Avail Use% Mounted on
    tmpfs 6.3G 1.5M 6.3G 1% /run
    efivarfs 192K 36K 152K 19% /sys/firmware/efi/efivars
    /dev/mapper/vg0-root 1.8T 4.5G 1.7T 1% /
    tmpfs 32G 0 32G 0% /dev/shm
    tmpfs 5.0M 0 5.0M 0% /run/lock
    /dev/md127 988M 196M 726M 22% /boot
    /dev/sda1 549M 6.2M 543M 2% /boot/efi
    tmpfs 6.3G 12K 6.3G 1% /run/user/0

    Just put in a ticket and they will enable it for you

    @GorillaServers Raised a ticket #APN-732296 for the said purpose. Please look into it

  • kaixinkaixin Member

    GLWS!

  • yuxmyyg90yuxmyyg90 Member

    What about your ticket? Looks like no one is looking into any tickets.

  • GorillaServersGorillaServers Member, Patron Provider

    @Detruire said:

    @bh4tech said:
    @GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

    It appears to be disabled on my $99 server from the last sale too. :#

    @bh4tech said:
    Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)

    There's an "install on smallest disk" option in the control panel, under Reinstallation > Configure System > Select disk layout.

    If you have any issue with the iGPU or anything else, please let support know via ticket. It is likely a simple BIOS setting that was reset with automation.

  • GorillaServersGorillaServers Member, Patron Provider

    @yuxmyyg90 said:
    What about your ticket? Looks like no one is looking into any tickets.

    DM me your ticket # I will look into it

  • yuxmyyg90yuxmyyg90 Member

    Ticket ID: DGK-611206] Order Number: 1591537655 Invoice #139965
    Ticket ID: NSL-761772
    Thanks, I guess support might work in India time shift.

  • totporttotport Member

    Let me in for the giveaway!

  • GorillaServersGorillaServers Member, Patron Provider

    @yuxmyyg90 said:
    Ticket ID: DGK-611206] Order Number: 1591537655 Invoice #139965
    Ticket ID: NSL-761772
    Thanks, I guess support might work in India time shift.

    Technical support is 24/7. Sales and billing is typically 9-5 MT. All of our tech support staff are locally based whether it be in LA or Utah. Your issue (VPN during order) has been resolved.

  • dedipromodedipromo Member

    For instant servers, is it possible to ship 1-2 HDD to the DC and pay a onetime remote hands fee to get it installled on the server?

  • GorillaServersGorillaServers Member, Patron Provider

    @dedipromo said:
    For instant servers, is it possible to ship 1-2 HDD to the DC and pay a onetime remote hands fee to get it installled on the server?

    In general we don't mix client owned hardware into leased hardware. Instant provision services particularly can't be modified - their main purpose is low cost via automation. If you need something custom it might be possible but you will need to open a ticket and have it reviewed.

    Thanked by 1dedipromo
  • yuxmyyg90yuxmyyg90 Member

    Technical support is 24/7. Sales and billing is typically 9-5 MT. All of our tech support staff are locally based whether it be in LA or Utah. Your issue (VPN during order) has been resolved.

    Thanks for quick response and great support.

  • gemini_geekgemini_geek Member

    super deals

Sign In or Register to comment.