GorillaServers Spices Things Up - The Fall Server Event Begins + Free Stuff

supremasi · September 2025

@GorillaServers is server with IPMI access ?
and I want to know how much for /29 or /28 IPv4

TorBapAmi · September 2025

GLWS

bingo567 · September 2025

add graphics card?

satorik · September 2025

GLWS!

pidandan · September 2025

Letsgo

JohnnySac · September 2025

Nice offer! GLWS!!

dedipromo · September 2025

Good luck with sales! Great offers.

noloudelou · September 2025

looks real good

lingzidi · September 2025

GLWS!

mwt · September 2025

Invoice #139953

zrj766 · September 2025

nice offer

choppy · September 2025

Wow!!!

MMMMMM · September 2025

Gorilla offers.

DrNutella · September 2025

Hey @GorillaServers

Thank you for the amazing deals. These are really great!

Have a great sale. I’m referring some of these to my clients.

ldzjzy · September 2025

GLWS

zqxinran · September 2025

Impressive storage deal!

spiritlhl · September 2025

Nice Deals

Pikachew · September 2025

GLWS

bh4tech · September 2025

@GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

root@104-250-140-202:~# sudo intel_gpu_top
No device filter specified and no discrete/integrated i915 devices found
root@104-250-140-202:~# sudo clinfo
Number of platforms 0

ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.3.2
ICD loader Profile OpenCL 3.0
root@104-250-140-202:~# sudo lshw -C display
*-display
description: VGA compatible controller
product: ASPEED Graphics Family
vendor: ASPEED Technology, Inc.
physical id: 0
bus info: pci@0000:06:00.0
logical name: /dev/fb0
version: 41
width: 32 bits
clock: 33MHz
capabilities: pm msi vga_controller cap_list rom fb
configuration: depth=32 driver=ast latency=0 resolution=1024,768
resources: irq:16 memory:a0000000-a0ffffff memory:a1000000-a101ffff ioport:5000(size=128) memory:c0000-dffff

The primary reason for buying the server was the iGPU, so please enable the iGPU.

Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)
Attaching disk RAID details below-

lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 25.5T 0 disk
├─sda1 8:1 0 550M 0 part /boot/efi
├─sda2 8:2 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sda3 8:3 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sdb 8:16 0 25.5T 0 disk
├─sdb1 8:17 0 550M 0 part
├─sdb2 8:18 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sdb3 8:19 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sdc 8:32 0 25.5T 0 disk
├─sdc1 8:33 0 550M 0 part
├─sdc2 8:34 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sdc3 8:35 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sdd 8:48 0 25.5T 0 disk
├─sdd1 8:49 0 550M 0 part
├─sdd2 8:50 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sdd3 8:51 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sr0 11:0 1 1024M 0 rom
nvme0n1 259:0 0 894.3G 0 disk
├─nvme0n1p1 259:1 0 550M 0 part
├─nvme0n1p2 259:2 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─nvme0n1p3 259:3 0 892.7G 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
root@104-250-140-202:~# df -h
Filesystem Size Used Avail Use% Mounted on
tmpfs 6.3G 1.5M 6.3G 1% /run
efivarfs 192K 36K 152K 19% /sys/firmware/efi/efivars
/dev/mapper/vg0-root 1.8T 4.5G 1.7T 1% /
tmpfs 32G 0 32G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/md127 988M 196M 726M 22% /boot
/dev/sda1 549M 6.2M 543M 2% /boot/efi
tmpfs 6.3G 12K 6.3G 1% /run/user/0

cyberform · September 2025

NICE DEAL

zakkuuno · September 2025

@bh4tech said:
@GorillaServers The iGPU seems to be disabled on my $99 server. Here is the GPU check output

root@104-250-140-202:~# sudo intel_gpu_top
No device filter specified and no discrete/integrated i915 devices found
root@104-250-140-202:~# sudo clinfo
Number of platforms 0

ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.3.2
ICD loader Profile OpenCL 3.0
root@104-250-140-202:~# sudo lshw -C display
*-display
description: VGA compatible controller
product: ASPEED Graphics Family
vendor: ASPEED Technology, Inc.
physical id: 0
bus info: pci@0000:06:00.0
logical name: /dev/fb0
version: 41
width: 32 bits
clock: 33MHz
capabilities: pm msi vga_controller cap_list rom fb
configuration: depth=32 driver=ast latency=0 resolution=1024,768
resources: irq:16 memory:a0000000-a0ffffff memory:a1000000-a101ffff ioport:5000(size=128) memory:c0000-dffff

The primary reason for buying the server was the iGPU, so please enable the iGPU.

Also, the disks have been partitioned in a weird manner. I was thinking that the OS would be installed either on the NVME or on the HDDs(in raid). However, it seems all the 5 disks are in RAID with disk space of 1.7TB. Is it possible to specify the OS to be installed on NVME with the other disks remaining free without opening a support ticket?(I did not find any option in the control panel, so asking)
Attaching disk RAID details below-

lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 25.5T 0 disk
├─sda1 8:1 0 550M 0 part /boot/efi
├─sda2 8:2 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sda3 8:3 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sdb 8:16 0 25.5T 0 disk
├─sdb1 8:17 0 550M 0 part
├─sdb2 8:18 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sdb3 8:19 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sdc 8:32 0 25.5T 0 disk
├─sdc1 8:33 0 550M 0 part
├─sdc2 8:34 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sdc3 8:35 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sdd 8:48 0 25.5T 0 disk
├─sdd1 8:49 0 550M 0 part
├─sdd2 8:50 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─sdd3 8:51 0 25.5T 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
sr0 11:0 1 1024M 0 rom
nvme0n1 259:0 0 894.3G 0 disk
├─nvme0n1p1 259:1 0 550M 0 part
├─nvme0n1p2 259:2 0 1G 0 part
│ └─md127 9:127 0 1022M 0 raid1 /boot
└─nvme0n1p3 259:3 0 892.7G 0 part
└─md126 9:126 0 1.7T 0 raid10
├─vg0-swap 252:0 0 4G 0 lvm [SWAP]
└─vg0-root 252:1 0 1.7T 0 lvm /
root@104-250-140-202:~# df -h
Filesystem Size Used Avail Use% Mounted on
tmpfs 6.3G 1.5M 6.3G 1% /run
efivarfs 192K 36K 152K 19% /sys/firmware/efi/efivars
/dev/mapper/vg0-root 1.8T 4.5G 1.7T 1% /
tmpfs 32G 0 32G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/md127 988M 196M 726M 22% /boot
/dev/sda1 549M 6.2M 543M 2% /boot/efi
tmpfs 6.3G 12K 6.3G 1% /run/user/0